(One intermediate revision by the same user not shown)
Line 3: Line 3:


==Tables==
==Tables==
Table 1 shows the temperature multipliers for several different batteries at different temperatures.
{| border="1" cellpadding="5"
{| border="1" cellpadding="5"
|-
|+'''Table 1. Battery Capacity Temperature Multipliers'''
! width="100", bgcolor="lightgray" | <font color="black"> <big>Temp (°C)</big> !! width="150", bgcolor="lightgrey" | <font color="black"> <big>Zinc-Chloride</big> !! width="150", bgcolor="lightgrey" | <font color="black"> <big>Portable Sealed NiMH (2C)</big> !! width="200", bgcolor="lightgrey" | <font color="black"> <big>Iron-Electrode (C/10) low rate extended life design</big> !! width="50", bgcolor="lightgrey" | <font color="black"> <big>Rechargable zinc/Alkaline/Mangenese Dioxide 50-100mA</big> !! width="100", bgcolor="lightgrey" | <font color="black"> <big>General AC Battery</big> !! width="100", bgcolor="lightgrey" | <font color="black"> <big>Lead Acid C/20</big>   
! width="100", bgcolor="lightgray" | <font color="black"> <big>Temp (°C)</big> !! width="150", bgcolor="lightgrey" | <font color="black"> <big>Zinc-Chloride</big> !! width="150", bgcolor="lightgrey" | <font color="black"> <big>Portable Sealed NiMH (2C)</big> !! width="200", bgcolor="lightgrey" | <font color="black"> <big>Iron-Electrode (C/10) low rate extended life design</big> !! width="50", bgcolor="lightgrey" | <font color="black"> <big>Rechargable zinc/Alkaline/Mangenese Dioxide 50-100mA</big> !! width="100", bgcolor="lightgrey" | <font color="black"> <big>General AC Battery</big> !! width="100", bgcolor="lightgrey" | <font color="black"> <big>Lead Acid C/20</big>   
|-
|-
| '''-30°C''' || - || - || - || - || - || 52  
| '''-30°C''' || - || - || - || - || - || 0.52  
|-
|-
| '''-20°C''' || - || - || - || - || 80 || 64  
| '''-20°C''' || - || - || - || - || 0.80 || 0.64  
|-
|-
| '''-10°C''' || 60 || 50 || 50 || 55 || - || 76  
| '''-10°C''' || 0.60 || 0.50 || 0.50 || 0.55 || - || 0.76  
|-
|-
| '''0°C''' || 80 || 80 || 70 || 75 || 95 || 85  
| '''0°C''' || 0.80 || 0.80 || 0.70 || 0.75 || 0.95 || 0.85  
|-
|-
| '''10°C''' || 97 || 85 || 90 || 85 || 100 || 92   
| '''10°C''' || 0.97 || 0.85 || 0.90 || 0.85 || 1.00 || 0.92   
|-
|-
| '''20°C''' || 100 || 90 || 100 || 95 || - || 98   
| '''20°C''' || 1.00 || 0.90 || 1.00 || 0.95 || - || 0.98   
|-
|-
| '''25°C''' || - || - || - || - || 100 || -  
| '''25°C''' || - || - || - || - || 1.00 || -  
|-
|-
| '''30°C''' || 110 ||95 || 100 || 100 || - || 102
| '''30°C''' || 1.10 || 0.95 || 1.00 || 1.00 || - || 1.02
|-
|-
| '''40°C''' || 115 || 100 || 100 || 100 || - || 104
| '''40°C''' || 1.15 || 1.00 || 1.00 || 1.00 || - || 1.04
|-
|-
| '''45°C''' || - || - || - || - || 100 || -  
| '''45°C''' || - || - || - || - || 1.00 || -  
|}  
|}  
Temperature multipliers are used when calculating the correct battery size of a solar photovoltaic system. The temperature multiplier for the battery is multiplied by the depth of discharge (DoD) and amp-hour (Ah) demand to obtain the needed battery storage of your system.
These values were obtained from 3rd and 4th Edition of Thomas B. Reddy's Battery Handbooks, [https://enphase.com/sites/default/files/downloads/support/Tech-Brief-AC-Battery-Params-NREL-SAM-EN-US.pdf], and [http://www.a-ghadimi.com/files/Courses/Renewable%20Energy/REN_Book.pdf].


See [[Help:Tables]].
See [[Help:Tables]].

Revision as of 20:18, 18 January 2020

Introduction

Describe what battery capacity means in this context.

Tables

Table 1 shows the temperature multipliers for several different batteries at different temperatures.

Table 1. Battery Capacity Temperature Multipliers
Temp (°C) Zinc-Chloride Portable Sealed NiMH (2C) Iron-Electrode (C/10) low rate extended life design Rechargable zinc/Alkaline/Mangenese Dioxide 50-100mA General AC Battery Lead Acid C/20
-30°C - - - - - 0.52
-20°C - - - - 0.80 0.64
-10°C 0.60 0.50 0.50 0.55 - 0.76
0°C 0.80 0.80 0.70 0.75 0.95 0.85
10°C 0.97 0.85 0.90 0.85 1.00 0.92
20°C 1.00 0.90 1.00 0.95 - 0.98
25°C - - - - 1.00 -
30°C 1.10 0.95 1.00 1.00 - 1.02
40°C 1.15 1.00 1.00 1.00 - 1.04
45°C - - - - 1.00 -

Temperature multipliers are used when calculating the correct battery size of a solar photovoltaic system. The temperature multiplier for the battery is multiplied by the depth of discharge (DoD) and amp-hour (Ah) demand to obtain the needed battery storage of your system. These values were obtained from 3rd and 4th Edition of Thomas B. Reddy's Battery Handbooks, [1], and [2].

See Help:Tables.

Use help:references to see how to use the reference format.[1]

Use Help:Images on how to upload the graph image(s). Please remember to use a very descriptive name for the file.

References

Template:Reflist

  1. It is quite easy and just relies on ref and /ref in between less than and greater than symbols.
Cookies help us deliver our services. By using our services, you agree to our use of cookies.