Line 34: | Line 34: | ||
33.3% at 1-sun AM1.5 have been realized. As an approach for low-cost and high-e*ciency cells, better radiation resistance of GaAs thin-5lm solar cells with novel structures fabricated on Si substrates has also been demonstrated. Novel structures such as Bragg re=ector and super-lattice structures are found to show a better initial cell performance and radiation resistance since those layers act as bu>er layers to reduce dislocations, and act as a back-surface 5eld and back-surface re=ector layers. | 33.3% at 1-sun AM1.5 have been realized. As an approach for low-cost and high-e*ciency cells, better radiation resistance of GaAs thin-5lm solar cells with novel structures fabricated on Si substrates has also been demonstrated. Novel structures such as Bragg re=ector and super-lattice structures are found to show a better initial cell performance and radiation resistance since those layers act as bu>er layers to reduce dislocations, and act as a back-surface 5eld and back-surface re=ector layers. | ||
====[http://www.sciencedirect.com/science/article/pii/S0038092X04002944 Multi-junction III–V solar cells: current status and future potential]==== | ====[http://www.sciencedirect.com/science/article/pii/S0038092X04002944 Multi-junction III–V solar cells: current status and future potential<ref>Masafumi Yamaguchi,Tatsuya Takamoto,Kenji Araki and Nicholas Ekins-Daukes, “ Multi-junction III–V solar cells: current status and future potential,” Proceedings of Solar Energy, vol. 79, pp. 78–85, July 2005</ref>]==== | ||
''Abstract''<br /> | ''Abstract''<br /> | ||
Our recent R&D activities of III–V compound multi-junction (MJ) solar cells are presented. Conversion efficiency of InGaP/InGaAs/Ge has been improved up to 31–32% (AM1.5) as a result of technologies development such as double hetero-wide band-gap tunnel junction, InGaP–Ge hetero-face structure bottom cell, and precise lattice-matching of InGaAs middle cell to Ge substrate by adding indium into the conventional GaAs layer. For concentrator applications, | Our recent R&D activities of III–V compound multi-junction (MJ) solar cells are presented. Conversion efficiency of InGaP/InGaAs/Ge has been improved up to 31–32% (AM1.5) as a result of technologies development such as double hetero-wide band-gap tunnel junction, InGaP–Ge hetero-face structure bottom cell, and precise lattice-matching of InGaAs middle cell to Ge substrate by adding indium into the conventional GaAs layer. For concentrator applications, |
Revision as of 17:10, 29 January 2013
This page describes selected literature available on Band gap Engineering for PV material optimization.
Analysis of thermoelectric characteristics of AlGaN and InGaN semiconductors[1]
Abstract: The thermoelectric properties of AlGaN and InGaN semiconductors are analyzed. In Author(s) analysis, the thermal conductivities, electrical conductivities, Seebeck coefficients, and figure of merits (Z*T) of AlGaN and InGaN semiconductors are computed. The electron transports in AlGaN and InGaN alloys are analyzed by solving Boltzmann transport equation, taking into account the dominant mechanisms of energy-dependent electron scatterings. Virtual crystal model is implemented to simulate the lattice thermal conductivity from phonon scattering for both AlGaN and InGaN alloys. The calculated Z*T is as high as 0.15 for optimized InGaN alloy at temperature around 1000 K. For optimized AlGaN composition, the Z*T of 0.06-0.07 can be achieved. The improved thermoelectric performance of ternary alloys over binary alloys can be attributed to the reduced lattice thermal conductivity.
High-efficiency multi-junction solar cells:Current status and future potential[2]
AlGaAs tunnel junction for high efficiency multi-junction solar cells: Simulation and measurement of[3]
Abstract
AlGaAs tunnel junctions are shown to be well-suited to concentrated photovoltaics where temperatures and current densities can be dramatically higher than for 1-sun flat-panel systems. Detailed comparisons of AlGaAs/AlGaAs tunnel junction experimental measurements over a range of temperatures expected during device operation in concentrator systems are presented. Experimental and simulation results are compared in an effort to decouple the tunnel junction from the overall multi-junction solar cell. The tunnel junction resistance is experimentally studied as a function of the temperature to determine its contribution to overall efficiency of the solar cell. The current-voltage behavior of the isolated TJ shows that as the temperature is increased from 25°C to 85°C, the resistance decreases from ~4.7×10-4 Ω∙cm2 to ~0.3×10-4 Ω∙cm2 for the operational range of a multi-junction solar cell under concentration.
Impact of spectral effects on the electrical parameters of multijunction amorphous silicon cells[4]
Abstract
The influence of spectral variation on the efficiency of single-, double- and triple-junction amorphous silicon cells has been investigated. The average photon energy (APE) proves to be a useful device-independent environmental parameter for quantifying the average hue of incident spectra. Single-junction devices increase in efficiency as light becomes blue shifted, because more of the incident spectrum lies within the absorption window and less in the redlinfra-red tail; this is denoted the primary spectral effect. Double- and triple-junction devices also exhibit a secondary spectral effect due to mismatch between the device structure and the incident spectrum. These both reach a maximum efficiency, which drops off as light is red or blue shifted. The effect is more pronounced for triple-junction than double-junction devices, as mismatch between junctions is statistically more likely.
Modeling the effect of varying spectra on multi junction A-SI solar cells[5]
Abstract
The performance of multijunction amorphous silicon cells has been investigated for outdoor solar spectral radiation, using long term measurement for existing data at CREST, Loughborough University. It is a further study of the solar system, destined to analyze the outdoor performance of the amorphous silicon cells. The short circuit current for each subcells have been modeled and implemented into a computer program to calculate the mismatched short circuit current of the whole device.
Japanese R&D Activities of High Efficiency III-V Compound Multi-Junction and Concentrator Solar Cells[6]
Abstract
This paper reviews Japanese R&D activities of III-V compound multi-junction (MJ) and concentrator solar cells. As a result of advanced technologies development for high efficiency cells and discovery of superior radiation-resistance of InGaP based materials, InGaP-based MJ solar cells have been commercialised for space use in Japan. A new world-record efficiency of 35.8% at 1 sun has been achieved with InGaP/GaAs/InGaAs 3-junction solar cell. MJ
solar cells composing of multi-layers with different bandgap energies have the potential for achieving high conversion efficiencies of over 50% and are promising for space and terrestrial applications due to wide photo response. In order to solve the problems of difficulties in making high performance and stable tunnel junctions, a double hetero (DH) structure tunnel junction was found to be useful for preventing diffusion from the tunnel junction and improving the tunnel junction performance by the authors. An InGaP material instead of AlGaAs for the top cell was proposed by NREL. As a result of advanced technologies development for high efficiency cells and discovery of superior radiation-resistance of InGaP-based materials by the authors, InGaP-based MJ solar cells have been commercialised for space use even in Japan since 2002. Most recently, world-record efficiency (35.8%) at 1-sun AM1.5G has been realised with inverted epitaxial grown InGaP/GaAs/InGaAs 3-junction cells by Sharp. Since the concentrator modules have been demonstrated to produce roughly 1.7 to 2.6 times more energy per area per annum than the 14 % multicrystalline silicon modules in most cities in Japan, concentrator PV Photovoltaics) as the 3rd PV technologies in addition to the 1st crystalline Si PV and the 2nd thin-film PV technologies are expected to contribute to
electricity cost reduction for widespread PV applications.
Low-dimensional Systems and Nanostructures - Multi-junction solar cells and novel structures for solar cell applications[7]
Abstract
The present status of R& D program for super-high e*ciency III–V compound multi-junction solar cells in the New Sunshine Project in Japan is presented. As a result of InGaP top cell material quality improvement, development of optically and electrically low-loss double-heterostructure InGaP tunnel junction, photon and carrier con5nements, and lattice matching between active cell layers and substrate, InGaP=InGaAs=Ge monolithic cascade 3-junction cells with an e*ciency of 31.7% at 1-sun AM1.5 and InGaP=GaAs==InGaAs mechanically stacked 3-junction cells with the highest (world-record) e*ciency of
33.3% at 1-sun AM1.5 have been realized. As an approach for low-cost and high-e*ciency cells, better radiation resistance of GaAs thin-5lm solar cells with novel structures fabricated on Si substrates has also been demonstrated. Novel structures such as Bragg re=ector and super-lattice structures are found to show a better initial cell performance and radiation resistance since those layers act as bu>er layers to reduce dislocations, and act as a back-surface 5eld and back-surface re=ector layers.
Multi-junction III–V solar cells: current status and future potential[8]
Abstract
Our recent R&D activities of III–V compound multi-junction (MJ) solar cells are presented. Conversion efficiency of InGaP/InGaAs/Ge has been improved up to 31–32% (AM1.5) as a result of technologies development such as double hetero-wide band-gap tunnel junction, InGaP–Ge hetero-face structure bottom cell, and precise lattice-matching of InGaAs middle cell to Ge substrate by adding indium into the conventional GaAs layer. For concentrator applications,
grid structure has been designed in order to reduce the energy loss due to series resistance, and world-record efficiency InGaP/InGaAs/Ge 3-junction concentrator solar cell with an efficiency of 37.4% (AM1.5G, 200-suns) has been fabricated. In addition, we have also demonstrated high-efficiency and large-area (7000 cm2) concentrator InGaP/InGaAs/Ge 3-junction solar cell modules of an outdoor efficiency of 27% as a result of developing high-efficiency InGaP/InGaAs/Ge 3-junction cells, low optical loss Fresnel lens and homogenizers, and designing high thermal conductivity modules.
Future prospects are also presented. We have proposed concentrator III–V compound MJ solar cells as the 3rd generation solar cells in addition to 1st generation crystalline Si solar cells and 2nd generation thin-film solar cells. We are now developing low-cost and high output power concentrator MJ solar cell modules with an output power of 400 W/m2 for terrestrial applications.
Novel materials for high-efficiency III–V multi-junction solar cells
Abstract
As a result of developing wide bandgap InGaP double hetero structure tunnel junction for sub-cell interconnection, InGaAs middle cell lattice-matched to Ge substrate, and InGaP-Ge heteroface structure bottom cell, we have demonstrated 38.9% efficiency at 489-suns AM1.5 with InGaP/InGaP/Ge 3-junction solar cells by in-house measurements. In addition, as a result of developing a non-imaging Fresnel lens as primary optics, a glass-rod kaleidoscope homogenizer as secondary optics and heat conductive concentrator solar cell modules, we have demonstrated 28.9% efficiency with 550-suns concentrator cell modules with an area of 5445 cm2. In order to realize 40% and 50% efficiency, new approaches for novel materials and structures are being studied. We have obtained the following results: (1) improvements of lattice-mismatched InGaP/InGaAs/Ge 3-junction solar cell property as a result of dislocation density reduction by using thermal cycle annealing, (2) high quality (In)GaAsN material for 4- and 5-junction applications by chemical beam epitaxy, (3)11.27% efficiency InGaAsN single-junction cells, (4) 18.27% efficiency InGaAs/GaAs potentially modulated quantum well cells, and (5) 7.65% efficiency InAs quantum dot cells.
III–V compound multi-junction solar cells: present and future
Abstract
As a result of top cell material quality improvement, development of optically and electrically low-loss double-hetero structure tunnel junction, photon and carrier confinements, and lattice-matching between active cell layers and substrate, the last 15 years have seen large improvements in III–V compound multi-junction (MJ) solar cells. In this paper, present status of R&D program for super-high-efficiency MJ cells in the New Sunshine Project in Japan is
presented. InGaP/InGaAs/Ge monolithic cascade 3-junction cells with newly recorded efficiency of 31.7% at AM1.5 (1-sun) were achieved on Ge substrates, in addition to InGaP/GaAs//InGaAs mechanically stacked 3-junction cells with world-record efficiency of 33.3%. Future prospects for realizing super-high-efficiency and low-cost MJ solar cells are also discussed. r 2002 Published by Elsevier Science B.V.
Super high-efficiency multi-junction and concentrator solar cells
Abstract
III–V compound multi-junction (MJ) (tandem) solar cells have the potential for achieving high conversion efficiencies of over 50% and are promising for space and terrestrial applications. We have proposed AlInP–InGaP double hetero (DH) structure top cell, wide-band gap InGaP DH structure tunnel junction for sub cell interconnection, and lattice-matched InGaAs middle cell. In 2004, we have successfully fabricated world-record efficiency concentrator InGaP/InGaAs/Ge 3-junction solar cells with an efficiency of 37.4% at 200-suns AM1.5 as a result of widening top cell band gap, current matching of sub cells, precise lattice matching of sub cell materials, proposal of InGaP–Ge heteroface bottom cell, and introduction of DH-structure tunnel junction. In addition, we have realized high-efficiency concentrator InGaP/InGaAs/Ge 3-junction solar cell modules (with area of 7000 cm2) with an out-door efficiency of 27% as a result of developing high-efficiency InGaP/InGaAs/Ge 3-junction cells, low optical loss Fresnel lens and homogenizers, and designing low
thermal conductivity modules.
Future prospects are also presented. We have proposed concentrator III–V compound MJ solar cells as the 3rd-generation solar cells in addition to 1st-generation crystalline Si solar cells and 2nd generation thin-film solar cells. We are now challenging to develop low-cost and high output power
concentrator MJ solar cell modules with an output power of 400W/m2 for terrestrial applications and high-efficiency, light-weight and low-cost MJ solar cells for space applications.
References
- ↑ H. Tong, H. Zhao, V. A. Handara, J. A. Herbsommer, and N. Tansu, “Analysis of thermoelectric characteristics of AlGaN and InGaN semiconductors,” Proceedings of SPIE, vol. 7211, no. 1, pp. 721103-721103-11, Feb. 2009
- ↑ Natalya V. Yastrebova, Centre for Research in Photonics, University of Ottawa, April 2007
- ↑ Jeffrey F. Wheeldon, Christopher E. Valdivia and Alex Walker, “AlGaAs TUNNEL JUNCTION FOR HIGH EFFICIENCY MULTI-JUNCTION SOLAR CELLS: SIMULATION AND MEASUREMENT OF TEMPERATURE-DEPENDENT OPERATION,”Conference publication of 2009 34th IEEE Photovoltaic specialists Conference (PVSC), pp. 000106 - 000111 , June 2009
- ↑ Betts, T.R. ,Jardine, C.N. , Gottschalg, R. , Infield, D.G. and Lane, K. “Impact of spectral effects on the electrical parameters of multijunction amorphous silicon cells,” Conference Publications of Photovoltaic Energy Conversion, vol. 2, p. 1756 - 1759, May 2003.
- ↑ Hanan Al Buflasa , Ralph Gottschalg and Tom Betts, “Modeling the effect of varying spectra on multi junction A-SI solar cells,” The Ninth Arab International Conference on Solar Energy, vol. 209, p. 78–85, April 2007.
- ↑ Masafumi Yamaguchi, “Japanese R&D Activities of High Efficiency III-V Compound Multi-Junction and Concentrator Solar Cells,” International Conference on Materials for Advanced Technologies 2011, vol. 15, pp. 265–274, 2012
- ↑ Masafumi Yamaguchi, “Low-dimensional Systems and Nanostructures - Multi-junction solar cells and novel structures for solar cell applications,” Proceedings of Physica E, vol. 14, pp. 84–90, April 2012
- ↑ Masafumi Yamaguchi,Tatsuya Takamoto,Kenji Araki and Nicholas Ekins-Daukes, “ Multi-junction III–V solar cells: current status and future potential,” Proceedings of Solar Energy, vol. 79, pp. 78–85, July 2005