The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 21: | Line 21: | ||
# [[File:athenaII_cura_extruder_settings.png|thumb|right|Extruder settings.]] Click on the Extruder tab in the Machine Setting dialog. Set the nozzle size to 0.4 mm and the Compatible material diameter to 1.75 mm.Β Close both the open menu dialogs.{{clear}} | # [[File:athenaII_cura_extruder_settings.png|thumb|right|Extruder settings.]] Click on the Extruder tab in the Machine Setting dialog. Set the nozzle size to 0.4 mm and the Compatible material diameter to 1.75 mm.Β Close both the open menu dialogs.{{clear}} | ||
# [[File:athenaII_cura_preferences.png|thumb|right|Preferences.]] Open the Preferences menu item, select General and uncheck Slice Automatically.{{clear}} | # [[File:athenaII_cura_preferences.png|thumb|right|Preferences.]] Open the Preferences menu item, select General and uncheck Slice Automatically.{{clear}} | ||
# [[File:athenaII_cura_view.png|thumb|right|Set visible tools.]] Open Settings>Configure setting visibility... In the upper | # [[File:athenaII_cura_view.png|thumb|right|Set visible tools.]] Open Settings>Configure setting visibility... In the upper left, select Basic from the drop down list, and close the dialog.{{clear}} | ||
# [[File:athenaII_cura_layer_height.png|thumb|right|Set layer height to 0.25 mm.]] In the settings bar on the right side of the window, expand Quality and set Layer Height to 0.25 mm.{{clear}} | # [[File:athenaII_cura_layer_height.png|thumb|right|Set layer height to 0.25 mm.]] In the settings bar on the right side of the window, expand Quality and set Layer Height to 0.25 mm.{{clear}} | ||
# [[File:athenaII_cura_infill.png|thumb|right|Set infill to 25%.]] Expand Infill and set Infill Density to 25%.{{clear}} | # [[File:athenaII_cura_infill.png|thumb|right|Set infill to 25%.]] Expand Infill and set Infill Density to 25%.{{clear}} |