We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Difference between revisions of "777 OSAT projects 2019"

From Appropedia
Jump to navigation Jump to search
 
(20 intermediate revisions by 14 users not shown)
Line 35: Line 35:
 
Image:Complete_assembly.jpg|[[Bucket Shower]]
 
Image:Complete_assembly.jpg|[[Bucket Shower]]
 
Image:FinalRing.JPG|[[Commode]]
 
Image:FinalRing.JPG|[[Commode]]
 +
Image:Rain Water Purifier.jpg|[[https://www.appropedia.org/Rain_Water_Purification_and_Storage Rain Water Purification & Storage]]
 
Image:Printed_chain.jpg|[[https://www.appropedia.org/Rain_chain Rain Chain]]
 
Image:Printed_chain.jpg|[[https://www.appropedia.org/Rain_chain Rain Chain]]
 
Image:Tablesawstick.jpg|[[Table Saw Fence Push Stick]]
 
Image:Tablesawstick.jpg|[[Table Saw Fence Push Stick]]
Line 48: Line 49:
 
Image:Dlbrinks_3v_lion.jpg|[[Use Li-ion Batteries Instead of Alkaline]]
 
Image:Dlbrinks_3v_lion.jpg|[[Use Li-ion Batteries Instead of Alkaline]]
 
Image:Werthmanhammerassy.jpeg | [[Improved Hammer]]
 
Image:Werthmanhammerassy.jpeg | [[Improved Hammer]]
Image:Snow Shovel Assembly.PNG | [[Snap Together Snow Shovel]]
+
Image:Snow_Shovel_Printable_Outdoors.jpg | [[Snap Together Snow Shovel]]
 
Image:FlyWheel and Pump Handle.PNG | [[Momentum Fire Starter]]
 
Image:FlyWheel and Pump Handle.PNG | [[Momentum Fire Starter]]
 
Image:Light_Attachment.jpg | [https://www.appropedia.org/Gravity_Light_Attachment Gravity Light Attachment]
 
Image:Light_Attachment.jpg | [https://www.appropedia.org/Gravity_Light_Attachment Gravity Light Attachment]
 
Image:PrintedDiverter.jpg | [[Urine Diverter for Composting Toilet]]
 
Image:PrintedDiverter.jpg | [[Urine Diverter for Composting Toilet]]
Image:parametric_Tweezers.PNG | [Single use parametric tweezers]
+
Image:parametric_Tweezers.PNG | [https://www.appropedia.org/Forceps/Tweezers Single use parametric tweezers]
 
Image:GPS Belt Clip V2.PNG | [https://www.appropedia.org/Improved_GPS_Belt_Clip Improved GPS Belt Clip]
 
Image:GPS Belt Clip V2.PNG | [https://www.appropedia.org/Improved_GPS_Belt_Clip Improved GPS Belt Clip]
 
Image:teshawar_infantometer.jpeg | [https://www.appropedia.org/OSAT_project_-_Infantometer Infantometer]
 
Image:teshawar_infantometer.jpeg | [https://www.appropedia.org/OSAT_project_-_Infantometer Infantometer]
Image:Acornsheller.PNG | [https://www.appropedia.org/Acorn_Sheller Acorn Sheller]
 
 
Image:Neck_Immobilizer_Half_Assembly.jpg | [https://www.appropedia.org/Neck_Immobilizer_for_Trauma]
 
Image:Neck_Immobilizer_Half_Assembly.jpg | [https://www.appropedia.org/Neck_Immobilizer_for_Trauma]
 
Image:Final_Pedal.jpg | [https://www.appropedia.org/Bike_Pedals#Abstract Bike Pedal]
 
Image:Final_Pedal.jpg | [https://www.appropedia.org/Bike_Pedals#Abstract Bike Pedal]
Line 72: Line 72:
 
Image:Hand Wood Planer.jpg | [[Hand Wood Planer]]
 
Image:Hand Wood Planer.jpg | [[Hand Wood Planer]]
 
Image:Assembled_Rest_2.JPG | [https://www.appropedia.org/Bowfishing_Rest Bowfishing Rest]
 
Image:Assembled_Rest_2.JPG | [https://www.appropedia.org/Bowfishing_Rest Bowfishing Rest]
Image:Finished.jpg | [https://www.appropedia.org/Zero-electricity_refrigerator Zero Electricity Refrigerator]
+
Image:Final zero fridge.jpg | [https://www.appropedia.org/Zero-electricity_refrigerator Zero Electricity Refrigerator]
 
Image:2019-12-04_(2).jpg | [[Fruit crusher]]
 
Image:2019-12-04_(2).jpg | [[Fruit crusher]]
 
Image:Wedge.png | [[Mobilization Wedge]]
 
Image:Wedge.png | [[Mobilization Wedge]]
Line 99: Line 99:
 
Image:printed_assembled_fitting.jpg |T Fitting [https://www.appropedia.org/Pipe_T-fitting ]
 
Image:printed_assembled_fitting.jpg |T Fitting [https://www.appropedia.org/Pipe_T-fitting ]
 
Image:MKM05.JPG |Potato Ricer [https://www.appropedia.org/Improved_Potato_Ricer ]
 
Image:MKM05.JPG |Potato Ricer [https://www.appropedia.org/Improved_Potato_Ricer ]
Image: ------ |[[Scrub Brush]]  
+
Image: OSAT_brush_thumbnail.jpg|[[Scrub Brush]]
 +
Image:CommercialAutoinjectorAssembled.jpg|AutoInejcter[https://www.appropedia.org/AutoInjector]
 +
Image: Cap.jpg |Modified cap for turning two-liter bottle into sharps disposal container [https://www.appropedia.org/Modified_cap_for_turning_two-liter_bottle_into_sharps_disposal_container]
 +
image:Finchers_GroundCollector2.jpg|[[Ground collector]]
 +
image:Custom Pegboard Panels.jpg|[[Modular Peg Board]]
 +
image:UltimateSnowScraper.jpeg|[[Ultimate Snow Scraper]]
 +
Image:Behereau-full.jpg|Bike Brakes[[https://www.appropedia.org/Open_Source_Bike_Brake]]
 +
image:Modular_Surgical_Retractor_-_ldgaines.JPG|[https://www.appropedia.org/Surgical_retractors_really_complex Modular Surgical Retractor]
 +
Image:OSATbothProjects.jpg 1. [[Acorn Sheller|Acorn Sheller]] 2. [[Wire Sensor Holder|Wire Sensor Holder]]
 +
Image:Mod Coral Regrowth Post.JPG|[[Modular Coral Regrowth Post]]
 +
Image: JCS CarPorts.png ‎| [[Car Charging Port https://www.thingiverse.com/thing:4023342]]
 
</gallery>
 
</gallery>
  

Latest revision as of 20:00, 15 December 2019

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.



Susgoals.png

Assignment[edit]

  1. Identify an OSAT that you would like to design to be a 3D printable technology
  2. Make sure someone else has not already done it : existing designs here. Also check former years 2014, 2015, 2016, 2018, (You can choose to do a major improvement on past design)
  3. Reserve your OSAT by signature tagging with ~~~~ next to the OSAT on the list generated by the Appropedia community: Requests for 3-D printable open source appropriate technology. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a significant way. Double check someone else has not already done a better job - use http://yeggi.com
  4. Design 3D printable components with ONLY OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com/ and link back to it on Appropedia.
  5. Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it)
  6. Include the following sections on your page using the template below (copy and paste wiki markup into your page)
  7. Add picture and link to your project page in gallery below.
  8. Print component and bring to class/ online students drop it off at Dr. Pearce's office box

Grading[edit]

  • 20% Print quality
  • 30% Documentation
  • 25% Design (design for printing, plastic minimization)
  • 25% Function - Is it OSAT? Does it work?

Automatic reductions: -50% no source or the use of non-OS software -10% per day for late

Gallery[edit]

Add your image and link the gallery below in a single line after the last one in the list

Template[edit]


Copy the wiki markup below to your page to use as a template

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.


Project Title[edit]

Project developed by []
Status
This OSAT has been designed but not yet tested - use at own risk.
This OSAT has been prototyped.

You can help Appropedia by contributing to the next step in this OSAT's status.

Abstract[edit]

  1. Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
  2. Picture of completed print using your printer
    Wood WorkingClamp Parts.png

Bill of Materials[edit]

  1. Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
    1. Upload and link to all source files from open source CAD
    2. Upload and link to all STLs

Tools needed for fabrication of the OSAT[edit]

  1. MOST Delta RepRap or similar RepRap 3-D printer

Skills and Knowledge Necessary to Make the OSAT[edit]

  • If you used special skill – link to relevant Wikipedia or Wikiversity articles/courses

Technical Specifications and Assembly Instructions[edit]

  1. Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
  2. Include print time estimate
  3. Include assembly time estimate
  4. Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
  5. Consider video if appropriate
Example video summary of textbook

Common Problems and Solutions[edit]

  • Include common mistakes/problems to avoid in building your OSAT and how to overcome them

Cost savings[edit]

  • If your solution is not a low cost one then it is not really appropriate.
  1. Estimate your costs
  2. Find a commercial equivalent, cite it and put the [url in square brackets]
  3. Calculate $ savings and % savings

Benefited Internet Communities[edit]

  • Name and add links to at least 5 using single brackets around [url name]

References[edit]

  • The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <ref> </ref> and <references/> tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: [1]
  1. web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html

Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in [[Category:How tos]] [[Category:Electricity]] [[Category:Electric lighting]].