(Created page with "{{777}} image:susgoals.png =Assignment= # Identify an OSAT that you would like to design to be a 3D printable technology # Make sure someone else has not already done...")
 
m (Text replacement - "{{777}}" to "{{777 notice}}")
 
(189 intermediate revisions by 86 users not shown)
Line 1: Line 1:
{{777}}
{{777 notice}}
 
[[File:susgoals.png]]
 
== Assignment ==


[[image:susgoals.png]]
=Assignment=
# Identify an [[OSAT]] that you would like to design to be a 3D printable technology
# Identify an [[OSAT]] that you would like to design to be a 3D printable technology
# Make sure someone else has not already done it : existing designs [[:Category:OSAT_3D-Printable_Designs|here]]. Also check former years [[777 OSAT projects 2014|2014]], [[777 OSAT projects 2015|2015]], [[777 OSAT projects 2016|2016]], [[777_OSAT_projects_2018|2018]], (You can choose to do a major improvement on past design)
# Make sure someone else has not already done it: existing designs [[:Category:OSAT 3D-Printable Designs|here]]. Also check former years [[777 OSAT projects 2014|2014]], [[777 OSAT projects 2015|2015]], [[777 OSAT projects 2016|2016]], [[777 OSAT projects 2018|2018]], (You can choose to do a major improvement on past design)
# Reserve your OSAT by signature tagging with <nowiki> ~~~~ </nowiki> next to the OSAT on the list generated by the Appropedia community: [[Requests for 3-D printable open source appropriate technology]]. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a '''significant''' way. Double check someone else has not already done a better job - use http://yeggi.com
# Reserve your OSAT by signature tagging with <nowiki> ~~~~ </nowiki> next to the OSAT on the list generated by the Appropedia community: [[Requests for 3-D printable open source appropriate technology]]. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a '''significant''' way. Double check someone else has not already done a better job - use http://yeggi.com
# Design 3D printable components with <u>ONLY</u> OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com/ and link back to it on Appropedia.
# Design 3D printable components with <u>ONLY</u> OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com/ and link back to it on Appropedia.
# Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it)
# Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it)
Line 12: Line 14:
# Print component and bring to class/ online students drop it off at Dr. Pearce's office box
# Print component and bring to class/ online students drop it off at Dr. Pearce's office box


=Grading=
== Grading ==
 
* 20% Print quality
* 20% Print quality
* 30% Documentation
* 30% Documentation
* 25% Design (design for printing, plastic minimization)
* 25% Design (design for printing, plastic minimization)
* 25% Function - Is it OSAT? Does it work?
* 25% Function - Is it OSAT? Does it work?
----
* ---


Automatic reductions:
Automatic reductions:
-50% no source or the use of non-OS software
-10% per day for late


=Gallery=
* 50% no source or the use of non-OS software
* 10% per day for late
 
== Gallery ==
 
  Add your image and link the gallery below in a single line after the last one in the list
  Add your image and link the gallery below in a single line after the last one in the list
<gallery caption="777 OSAT 3-D Printable Designs">
<gallery caption="777 OSAT 3-D Printable Designs">
 
Image:elbow_splint_1.jpg| [[Parametric elbow splint]]
Image:Vent hanger.jpg|[[Car Heater-Vent Hanger|Vent Hanger]]
Image:20191204 185021.jpg|[[User talk:Siege|Calipers]]
Image:Aquaponics_with_plants.jpeg|[[Aquaponics System]]
Image:Clubfootbracefinal.jpg|[[Club foot Brace for Infants]]
Image:Clubfootbracefinal.jpg|[[Club foot Brace for Infants]]
 
Image:Printed Locking Forceps.JPG|[[Item: Locking Forceps|Locking Forceps with Interchangeable Tips]]
Image:IMG_2298.jpg|[[Ankle Splint|Ankle Brace]]
Image:Complete_assembly.jpg|[[Bucket Shower]]
Image:FinalRing.JPG|[[Commode]]
Image:Rain Water Purifier.jpg|[[Rain Water Purification and Storage|Rain Water Purification & Storage]]
Image:Printed_chain.jpg|[[Rain Chain]]
Image:Tablesawstick.jpg|[[Table Saw Fence Push Stick]]
Image:SPOONFORK.jpg|[[Spoon Multi-tool]]
Image:ATB_Wrench.png|[[Pocket Wrench]]
Image:Fecal kit complete.jpg|[[Fecal Sample Collection Kit|Fecal Sample Kit]]
Image:Rsimpson_Final_OSAT.jpg|[[Updated Forestry Densiometer (Smartphone Capable)|Updated Forestry Densiometer]]
Image:CT pic.JPG|[[Quick Square]]
Image:Ice_Scraper_funnel.JPG|[[Ergonomic Ice Scraper|Ergonomic Ice Scraper/Funnel]]
Image:VerticalStorageContainerPieces.jpg|[[Parametric Vertical Storage]]
Image:AssemblyA.JPG|[[Tools To Measure Children's Height]]
Image:Ram Pump 2.JPG|[[Ram Pump]]
Image:Dlbrinks_3v_lion.jpg|[[Use Li-ion Batteries Instead of Alkaline]]
Image:Werthmanhammerassy.jpeg | [[Improved Hammer]]
Image:Snow_Shovel_Printable_Outdoors.jpg | [[Snap Together Snow Shovel]]
Image:FlyWheel and Pump Handle.PNG | [[Momentum Fire Starter]]
Image:Light_Attachment.jpg | [[Gravity Light Attachment]]
Image:PrintedDiverter.jpg | [[Urine Diverter for Composting Toilet]]
Image:parametric_Tweezers.PNG | [https://www.appropedia.org/Forceps/Tweezers Single use parametric tweezers]
Image:GPS Belt Clip V2.PNG | [[Improved GPS Belt Clip]]
Image:teshawar_infantometer.jpeg | [[OSAT project - Infantometer|Infantometer]]
Image:Neck_Immobilizer_Half_Assembly.jpg | [https://www.appropedia.org/Neck_Immobilizer_for_Trauma]
Image:Final_Pedal.jpg | [[Bike Pedals#Abstract|Bike Pedal]]
Image:SideViewOfPot.JPEG | [[Hanging Garden that Minimizes Water Use]]
Image:Projector_Mount.jpg | [[Low Profile Projector Ceiling Mount]]
Image:jchamilt_OSAT.PNG|[[OSAT toilet paper holder]]
Image:Ajv_motor_housings.PNG | [[OSHE Growbot Mounting Units]]
Image:Zsa_growbot_testbench.png | [[OSHE Growbot Motor Encoders]]
Image:Scale img.PNG | [[Weighing scales/mass balance|Mass Balance]]
Image:PointerTrowelPrint.jpg | [[Pointer Trowel]]
Image:Edger_pic.jpg | [[Hand Rotary Edger]]
Image:NEMA_6-50_Plug_Cover.JPG | [[Welder Plug Cover]]
Image:Assembly_talbot_closed.JPG | [[Talbot Type Water Tap]]
Image:Jcpaulse_OSATproject.jpg | [[Mineral Sifter]]
Image:SpeculumNP1.jpg | [[3D Print Speculum|Speculum]]
Image:Hand Wood Planer.jpg | [[Hand Wood Planer]]
Image:Assembled_Rest_2.JPG | [[Bowfishing Rest]]
Image:Final zero fridge.jpg | [[Zero-electricity refrigerator|Zero Electricity Refrigerator]]
Image:2019-12-04_(2).jpg | [[Fruit crusher]]
Image:Wedge.png | [[Mobilization Wedge]]
Image:Tray.PNG | [[Design Challenge#Kidney Tray|Kidney Tray]]
Image:bikeaxlejnb.jpg | [[Bike Thru Axle]]
Image:PharmacyBottleCapPrint.png | [[Pharmaceutical Bottle Caps]]
Image:IMG_0249.jpg| [[Crawler Harness Holder]]
Image:MountPart.jpg|[[Fuel Container Restraint#Assembly Instructions|Fuel Container Restraint]]
Image:Goniometer3Dprint.JPG | [[3D Printable Goniometer]]
Image:Leaf_Press_Image.jpg|[[Leaf Press for Leaf Protein Concentrate]]
Image:Swlfynn_OSAT_base_and_cap.jpg|[[Tool-Free Tile Leveling System]]
Image:RollerScrew_SCAD.png|[[3D Printable Cider Press]]
File:Combined seat.jpg|[[Seat]]
Image:Monochromator_Final.jpg|[[Open Source Automated Scanning Monochromator|Automated Scanning Monochromator]]
Image:Nutcrackerosat.jpg|[[Nut Cracker]]
Image:smwurstosatpipette.jpg|[[Pipette Carousel]]
Image:toiletpaperholder.jpg|[[Toilet Paper Holder]] [[User:jdmajors|jdmajors]]
Image:OS Nano Balance mark1.JPG|[[3-D Printable Digital Balance]]
Image:HoriHoriKnifePrint.jpg|[https://www.appropedia.org/Hori_Hori_Knife_/_Shovel Hori Hori Knife / Shovel]
Image: ------ |[[Car Cable Ports - https://www.thingiverse.com/thing:4023342]]
Image:Kjkurtz spreaderassemb2.png |2L Seed spreader [https://www.appropedia.org/Seed_Spreader_/_Salt_Shaker]
Image: ThumbSplintFrontPic.jpg|Parametric brace for broken or sprained thumb "[[Thumb Spike]]"
Image: PeaSheller.JPG |Manual Pea Sheller [https://www.appropedia.org/Manual_Rotating_Pea_Sheller]
Image: Completed_cycle_tracker.jpg|Menstrual Cycle Tracker [https://www.appropedia.org/Daily_menstrual_cycle_tracker]
Image: tlfedorberrypicker.jpg|Fully Printable Berry Picker [https://www.appropedia.org/Fully_Printable_Wild_Berry_Scoop_Picker]
Image:printed_assembled_fitting.jpg |T Fitting [https://www.appropedia.org/Pipe_T-fitting ]
Image:MKM05.JPG |Potato Ricer [https://www.appropedia.org/Improved_Potato_Ricer ]
Image: OSAT_brush_thumbnail.jpg|[[Scrub Brush]]
Image:CommercialAutoinjectorAssembled.jpg|AutoInejcter[https://www.appropedia.org/AutoInjector]
Image: Cap.jpg |Modified cap for turning two-liter bottle into sharps disposal container [https://www.appropedia.org/Modified_cap_for_turning_two-liter_bottle_into_sharps_disposal_container]
image:Finchers_GroundCollector2.jpg|[[Ground collector]]
image:Custom Pegboard Panels.jpg|[[Modular Peg Board]]
image:UltimateSnowScraper.jpeg|[[Ultimate Snow Scraper]]
Image:Behereau-full.jpg|Bike Brakes[[Open Source Bike Brake]]
image:Modular_Surgical_Retractor_-_ldgaines.JPG|[[Surgical retractors really complex|Modular Surgical Retractor]]
Image:OSATbothProjects.jpg 1. [[Acorn Sheller]] 2. [[Wire Sensor Holder]]
Image:Mod Coral Regrowth Post.JPG|[[Modular Coral Regrowth Post]]
Image: JCS CarPorts.png | [[Car Charging Port https://www.thingiverse.com/thing:4023342]]
</gallery>
</gallery>


=Template=
== Template ==
 
 
----
Copy the wiki markup below to your page to use as a template
----
 
{{777}}
==Title of the device or system ==
Project developed by [your name linked to your user account]
{{Statusboxtop}}
{{status-design}}
{{status-prototype}}
You can help Appropedia by contributing to the next step in this [[OSAT]]'s [[:Category:Status|status]].
{{boxbottom}}
 
==Abstract==
# Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
# Picture of completed print using your printer [[Image:Wood_WorkingClamp_Parts.png|200px|right]]
 
== Bill of Materials==
# Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
## Upload and link to all source files from open source CAD
## Upload and link to all STLs
 
== Tools needed for fabrication of the OSAT==
# [[AthenaII| MOST Delta RepRap]] or similar RepRap 3-D printer
#
 
== Skills and Knowledge Necessary to Make the OSAT ==
* If you used special skill – link to relevant Wikipedia or Wikiversity articles/courses
 
== Technical Specifications and Assembly Instructions==
# Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
# Include print time estimate
# Include assembly time estimate
# Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
# Consider video if appropriate
{|style="border:1px solid #73BF73; background-color: #E6FFE6; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="150px"
!<big>Example video summary of textbook</big>
|-
|<center>{{#widget:YouTube|id=yiJDx9dCfEQ}} </center>
|-
|}
 
=== Common Problems and Solutions===
* Include common mistakes/problems to avoid in building your OSAT and how to overcome them
 
== Cost savings==
* If your solution is not a low cost one then it is not really appropriate.
# Estimate your costs
# Find a commercial equivalent, cite it and put the [url in square brackets]
# Calculate $ savings and % savings
 
== Benefited Internet Communities ==
* Name and add links to at least 5 using single brackets around [url name]
 
==References==
 
* The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <nowiki> <ref> </ref> and <references/>  </nowiki>tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: <ref> web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html</ref>
 
<references/>
<nowiki>
Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health  care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in


[[Category:How tos]]
{{Create
[[Category:Electricity]]
| preload = OSAT project
[[Category:Electric lighting]].
}}


</nowiki>
{{Page data}}


[[category:OSAT 3D-Printable Designs]]
[[Category:OSAT 3D-Printable Designs]]

Latest revision as of 12:35, 6 February 2023

This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...

Susgoals.png

Assignment[edit | edit source]

  1. Identify an OSAT that you would like to design to be a 3D printable technology
  2. Make sure someone else has not already done it: existing designs here. Also check former years 2014, 2015, 2016, 2018, (You can choose to do a major improvement on past design)
  3. Reserve your OSAT by signature tagging with ~~~~ next to the OSAT on the list generated by the Appropedia community: Requests for 3-D printable open source appropriate technology. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a significant way. Double check someone else has not already done a better job - use http://yeggi.com
  4. Design 3D printable components with ONLY OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com/ and link back to it on Appropedia.
  5. Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it)
  6. Include the following sections on your page using the template below (copy and paste wiki markup into your page)
  7. Add picture and link to your project page in gallery below.
  8. Print component and bring to class/ online students drop it off at Dr. Pearce's office box

Grading[edit | edit source]

  • 20% Print quality
  • 30% Documentation
  • 25% Design (design for printing, plastic minimization)
  • 25% Function - Is it OSAT? Does it work?
  • ---

Automatic reductions:

  • 50% no source or the use of non-OS software
  • 10% per day for late

Gallery[edit | edit source]

Add your image and link the gallery below in a single line after the last one in the list

Template[edit | edit source]

FA info icon.svg Angle down icon.svg Page data
Authors Joshua M. Pearce
License CC-BY-SA-3.0
Language English (en)
Related 0 subpages, 2 pages link here
Impact 2,715 page views
Created November 14, 2019 by Joshua M. Pearce
Modified February 6, 2023 by Felipe Schenone
Cite as Joshua M. Pearce (2019–2023). "777 OSAT projects 2019". Appropedia. Retrieved April 18, 2024.
API queries basic, semantic, html, files, more
Retrieved from "https://www.appropedia.org/w/index.php?title=777_OSAT_projects_2019&oldid=697958"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.