Devon Smith (talk | contribs) |
m (Standardize wikitext) |
||
(27 intermediate revisions by 7 users not shown) | |||
Line 1: | Line 1: | ||
{{777}} | {{777 notice}} | ||
[[File:susgoals.png]] | |||
== Assignment == | |||
# Identify an [[OSAT]] that you would like to design to be a 3D printable technology | # Identify an [[OSAT]] that you would like to design to be a 3D printable technology | ||
# Make sure someone else has not already done it : existing designs [[:Category: | # Make sure someone else has not already done it : existing designs [[:Category:OSAT 3D-Printable Designs|here]]. Also check former years [[777 OSAT projects 2014|2014]], [[777 OSAT projects 2015|2015]], [[777 OSAT projects 2016|2016]](You can choose to do a major improvement on past design) | ||
# Reserve your OSAT by signature tagging with <nowiki> ~~~~ </nowiki> next to the OSAT on the list generated by the Appropedia community: [[Requests for 3-D printable open source appropriate technology]]. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a '''significant''' way. Double check someone else has not already done a better job - use http://yeggi.com | # Reserve your OSAT by signature tagging with <nowiki> ~~~~ </nowiki> next to the OSAT on the list generated by the Appropedia community: [[Requests for 3-D printable open source appropriate technology]]. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a '''significant''' way. Double check someone else has not already done a better job - use http://yeggi.com | ||
# Design 3D printable components with <u>ONLY</u> OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com | # Design 3D printable components with <u>ONLY</u> OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com and link back to it on Appropedia. | ||
# Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it) | # Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it) | ||
# Include the following sections on your page using the template below (copy and paste wiki markup into your page) | # Include the following sections on your page using the template below (copy and paste wiki markup into your page) | ||
Line 12: | Line 14: | ||
# Print component and bring to class | # Print component and bring to class | ||
=Grading= | == Grading == | ||
* 20% Print quality | * 20% Print quality | ||
* 30% Documentation | * 30% Documentation | ||
* 25% Design (design for printing, plastic minimization) | * 25% Design (design for printing, plastic minimization) | ||
* 25% Function - Is it OSAT? Does it work? | * 25% Function - Is it OSAT? Does it work? | ||
* --- | |||
Automatic reductions: | Automatic reductions: | ||
=Gallery= | * 50% no source or the use of non-OS software | ||
* 10% per day for late | |||
== Gallery == | |||
Add your image and link the gallery below in a single line after the last one in the list | Add your image and link the gallery below in a single line after the last one in the list | ||
<gallery caption="777 OSAT 3-D Printable Designs"> | <gallery caption="777 OSAT 3-D Printable Designs"> | ||
Line 29: | Line 34: | ||
Image:Corn-shell.jpg|[[Corn sheller]] | Image:Corn-shell.jpg|[[Corn sheller]] | ||
Image:Clubfootbracefinal.jpg|[[Club foot Brace for Infants]] | Image:Clubfootbracefinal.jpg|[[Club foot Brace for Infants]] | ||
Image:OSAT Monochromator.jpg|[[Monochromator]][ | Image:OSAT Monochromator.jpg|[[Monochromator]][https://www.appropedia.org/Monochromator] | ||
Image:Garden Rip and Seeder.jpeg|[[Garden Rip and Seed Tool]] | Image:Garden Rip and Seeder.jpeg|[[Garden Rip and Seed Tool]] | ||
Image:CNC Assembly Final.JPG|[[CNC Lubrication and Chip Clearing System]] | Image:CNC Assembly Final.JPG|[[CNC Lubrication and Chip Clearing System]] | ||
Image:Guardassembly.jpg |[[Universal handguards]][ | Image:Guardassembly.jpg |[[Universal handguards]][https://www.appropedia.org/Universal_handguards#Assembly_Instructions] | ||
Image:FCT_Final_A.jpg |[ | Image:FCT_Final_A.jpg |[[Fish Cleaning Tool#Fish Cleaning Tool|Fish Cleaning Tool]] | ||
Image:OSHorseShoes.jpg |[[Horseshoes]][ | Image:OSHorseShoes.jpg |[[Horseshoes]][https://www.appropedia.org/Horseshoes] | ||
Image:BTJ_water_bottle_filter_main.jpg |[ | Image:BTJ_water_bottle_filter_main.jpg |[[Water bottle filter]] | ||
Image:Otoscope_phone.jpg |[ | Image:Otoscope_phone.jpg |[[Smart Phone adaptive Otoscope]] | ||
Image:Night_Splint.jpeg|[ | Image:Night_Splint.jpeg|[[Ankle Brace Night Splint]] | ||
Image:Bike_Grip_assembly.jpg|[ | Image:Bike_Grip_assembly.jpg|[[Ergonomic bike grips|Ergonomic Bike Grip]] | ||
Image:Waterturbine.JPG picture|[[microturbine]] | Image:Waterturbine.JPG picture|[[microturbine]] | ||
Image:Final Maker with Briquettes.jpg|[[Newspaper briquet maker]][ | Image:Final Maker with Briquettes.jpg|[[Newspaper briquet maker]][https://www.appropedia.org/Newspaper_briquet_maker] | ||
Image:AssembledWD.jpg|[[Hand Washing Station]][ | Image:AssembledWD.jpg|[[Hand Washing Station]][https://www.appropedia.org/Hand_Washing_Station#OpenSCAD_Files] | ||
Image:Chain_Guard_Bottle.jpg |[[Bike Chain Guard]] | Image:Chain_Guard_Bottle.jpg |[[Bike Chain Guard]] | ||
Image:Cooling Section Upgrade Final.jpg|[[Recyclebot Cooling Fan Section]] | Image:Cooling Section Upgrade Final.jpg|[[Recyclebot Cooling Fan Section]] | ||
Image:Light Mount 3.jpg|[[Customizable Bike Light Mount]] | Image:Light Mount 3.jpg|[[Customizable Bike Light Mount]] | ||
Image:CustomShovelHandle.png | | Image:CustomShovelHandle.png | [[customizable shovel handle]][https://www.appropedia.org/Customizable_shovel_handle#Technical_Specifications_and_Assembly_Instructions] | ||
Image:Berry Scoop Final.jpg|[[Wild Berry Scoop Picker]] | Image:Berry Scoop Final.jpg|[[Wild Berry Scoop Picker]] | ||
Image:Peanut_mill.jpeg| [ | Image:Peanut_mill.jpeg| [[Peanut Mill#Peanut Mill|Peanut Mill]] | ||
Image:Image walnut.jpeg| [ | Image:Image walnut.jpeg| [[Walnut Cracker]] | ||
Image:Admitche waterer.jpg| [ | Image:Admitche waterer.jpg| [https://www.appropedia.org/Chicken_Feeder/Waterer_w/_adapter Poultry Feeder/Waterer w/ adapter] | ||
Image:1.jpg| [ | Image:1.jpg| [[Powder maker - Chilies and herbs|Powder maker-Chilies and herbs]] | ||
Image:Straw Filter assembled.jpeg | Image:Straw Filter assembled.jpeg | Straw Filter [https://www.appropedia.org/Straw_Filter] | ||
Image:Spacer.jpg | Stud Spacer for Wall Framing [ | Image:Spacer.jpg | Stud Spacer for Wall Framing [https://www.appropedia.org/Framing_Spacer] | ||
Image:lloxner_foot.JPG | Prosthetic Foot [ | Image:lloxner_foot.JPG | Prosthetic Foot [https://www.appropedia.org/3d_printable_prosthetic_foot] | ||
Image:Blnd_asst_02_apetsiuk.jpg | [ | Image:Blnd_asst_02_apetsiuk.jpg | [[Blind Person's Assistant]] | ||
Image:Bamboo_joint_1.jpg | Bamboo Joint/Connector [ | Image:Bamboo_joint_1.jpg | Bamboo Joint/Connector [https://www.appropedia.org/Bamboo_Joints_for_house] | ||
Image:Printedusingmyprinter.jpeg | [ | Image:Printedusingmyprinter.jpeg | [[Retractive Cooling for recyclebot]] | ||
Image:Dew_Collector.JPG | Water Dew collector [ | Image:Dew_Collector.JPG | Water Dew collector [https://www.appropedia.org/Water_Dew_Collector#Bill_of_Materials] | ||
Image:Jig_isometric.jpg | [ | Image:Jig_isometric.jpg | [[Kreg Jig|Drilling Kreg Jig]] | ||
Image: PlasticGridner.jpeg | Automated Plastic Grinder [ | Image: PlasticGridner.jpeg | Automated Plastic Grinder [https://www.appropedia.org/Automated_Plastic_Grinder/Recycler] | ||
Image: Hemostat.jpg | [[Hemostats]] | Image: Hemostat.jpg | [[Hemostats]] | ||
Image: 2-literwinnowerrender.JPG |[ | Image: 2-literwinnowerrender.JPG |[[2 Liter Winnower#2-Liter Winnower|2-Liter Winnower]] | ||
Image: Cotton extractor(yarn maker).jpg | [[ Cotton to yarn maker]] | Image: Cotton extractor(yarn maker).jpg | [[Cotton to yarn maker]] | ||
Image: Dial Indicator Front.jpg |Dial Indicator [ | Image: Dial Indicator Front.jpg |Dial Indicator [https://www.appropedia.org/Dial_Indicator#Abstract] | ||
Image: Sprinkler Head.jpg | Sprinkler Head [https://www.appropedia.org/Sprinkler_Head#References] [https://www.youmagine.comdesigns/sprinkler-head-58-36] | |||
</gallery> | </gallery> | ||
=Template= | == Template == | ||
* --- | |||
Copy the wiki markup below to your page to use as a template | Copy the wiki markup below to your page to use as a template | ||
{{777}} | * --- | ||
==Title of the device or system == | |||
{{777 notice}} | |||
== Title of the device or system == | |||
Project developed by [your name linked to your user account] | |||
== Abstract == | |||
# Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully? | # Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully? | ||
# Picture of completed print using your printer [[ | # Picture of completed print using your printer [[File:Wood WorkingClamp Parts.png|200px|right]] | ||
== Bill of Materials == | |||
# Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts | # Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts | ||
## Upload and link to all source files from open source CAD | ## Upload and link to all source files from open source CAD | ||
## Upload and link to all STLs | ## Upload and link to all STLs | ||
== Tools needed | == Tools needed == | ||
# [[Athena Build Overview| MOST Delta RepRap]] or similar RepRap 3-D printer | |||
# [[Athena Build Overview|MOST Delta RepRap]] or similar RepRap 3-D printer | |||
== Skills and knowledge needed == | |||
* If you used special skill – link to relevant wikipedia or wikiversity articles/courses | * If you used special skill – link to relevant wikipedia or wikiversity articles/courses | ||
== Technical Specifications and Assembly Instructions== | == Technical Specifications and Assembly Instructions == | ||
# Provide directions for print/assembly - be detailed enough in your | |||
# Provide directions for print/assembly - be detailed enough in your "how to" to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions. | |||
# Include print time estimate | # Include print time estimate | ||
# Include assembly time estimate | # Include assembly time estimate | ||
# Including drawings or pictures of the device at stage of assembly at minimum. ( | # Including drawings or pictures of the device at stage of assembly at minimum. ([[Special:UploadWizard|Upload]]) | ||
# Consider video if appropriate | # Consider video if appropriate | ||
=== Common Problems and Solutions=== | {{Video|yiJDx9dCfEQ|Example video summary of textbook}} | ||
=== Common Problems and Solutions === | |||
* Include common mistakes/problems to avoid in building your OSAT and how to overcome them | * Include common mistakes/problems to avoid in building your OSAT and how to overcome them | ||
== Cost savings== | == Cost savings == | ||
* If your solution is not a low cost one then it is not really appropriate. | * If your solution is not a low cost one then it is not really appropriate. | ||
# Estimate your costs | # Estimate your costs | ||
Line 121: | Line 127: | ||
== Benefited Internet Communities == | == Benefited Internet Communities == | ||
* Name and add links to at least 5 using single brackets around [url name] | * Name and add links to at least 5 using single brackets around [url name] | ||
==References== | == References == | ||
* The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <nowiki | * The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <nowiki> and <references /> </nowiki>tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example:<ref>web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://web.archive.org/web/20021201231338/http://www.eren.doe.gov:80/erec/factsheets/landscape.html</ref> | ||
<references/> | <references /> | ||
Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use . Be sure to categorize your device so that it will be easy to find – for example "Low voltage connection basics" is categorized in | |||
{{Page data}} | |||
[[Category:Water]] | |||
[[Category:How tos]] | [[Category:How tos]] | ||
[[Category:Electricity]] | [[Category:Electricity]] | ||
[[Category:Electric lighting]] | [[Category:Electric lighting]] | ||
[[Category:OSAT 3D-Printable Designs]] | |||
[[ |
Latest revision as of 19:32, 8 June 2023
Assignment[edit | edit source]
- Identify an OSAT that you would like to design to be a 3D printable technology
- Make sure someone else has not already done it : existing designs here. Also check former years 2014, 2015, 2016(You can choose to do a major improvement on past design)
- Reserve your OSAT by signature tagging with ~~~~ next to the OSAT on the list generated by the Appropedia community: Requests for 3-D printable open source appropriate technology. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a significant way. Double check someone else has not already done a better job - use http://yeggi.com
- Design 3D printable components with ONLY OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender) for FreeCAD put on https://www.youmagine.com and link back to it on Appropedia.
- Create an Appropedia page for your project. (Easiest way to create a page is put double square brackets around your project title on the reservation list - this will create a red hyperlink to it)
- Include the following sections on your page using the template below (copy and paste wiki markup into your page)
- Add picture and link to your project page in gallery below.
- Print component and bring to class
Grading[edit | edit source]
- 20% Print quality
- 30% Documentation
- 25% Design (design for printing, plastic minimization)
- 25% Function - Is it OSAT? Does it work?
- ---
Automatic reductions:
- 50% no source or the use of non-OS software
- 10% per day for late
Gallery[edit | edit source]
Add your image and link the gallery below in a single line after the last one in the list
-
Straw Filter [7]
-
Stud Spacer for Wall Framing [8]
-
Prosthetic Foot [9]
-
Bamboo Joint/Connector [10]
-
Water Dew collector [11]
-
Automated Plastic Grinder [12]
-
Dial Indicator [13]
Template[edit | edit source]
- ---
Copy the wiki markup below to your page to use as a template
- ---
Title of the device or system[edit | edit source]
Project developed by [your name linked to your user account]
Abstract[edit | edit source]
- Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
- Picture of completed print using your printer
Bill of Materials[edit | edit source]
- Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
- Upload and link to all source files from open source CAD
- Upload and link to all STLs
Tools needed[edit | edit source]
- MOST Delta RepRap or similar RepRap 3-D printer
Skills and knowledge needed[edit | edit source]
- If you used special skill – link to relevant wikipedia or wikiversity articles/courses
Technical Specifications and Assembly Instructions[edit | edit source]
- Provide directions for print/assembly - be detailed enough in your "how to" to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
- Include print time estimate
- Include assembly time estimate
- Including drawings or pictures of the device at stage of assembly at minimum. (Upload)
- Consider video if appropriate
Common Problems and Solutions[edit | edit source]
- Include common mistakes/problems to avoid in building your OSAT and how to overcome them
Cost savings[edit | edit source]
- If your solution is not a low cost one then it is not really appropriate.
- Estimate your costs
- Find a commercial equivalent
- Calculate $ savings and % savings
Benefited Internet Communities[edit | edit source]
- Name and add links to at least 5 using single brackets around [url name]
References[edit | edit source]
- The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the and <references /> tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example:[1]
- ↑ web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://web.archive.org/web/20021201231338/http://www.eren.doe.gov:80/erec/factsheets/landscape.html
Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use . Be sure to categorize your device so that it will be easy to find – for example "Low voltage connection basics" is categorized in