This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...

Assignment

1. Identify an OSAT that you would like to design to be a 3D printable technology
2. Make sure someone else has not already done it see the existing designs here.
3. Reserve your OSAT by signature tagging with ~~~~ next to the OSAT on the list generated by the Appropedia community: Requests for 3-D printable open source appropriate technology. You can add your own ideas to the list, more than one of you can tackle the same tech in a different way, you may improve upon existing designs if you do so in a significant way.
4. Design 3D printable components with ONLY OS CAD packages (e.g. OpenSCAD, FreeCAD, or Blender)
5. Create a Appropedia page for your project. (Easiest way to create a page is to search for the name of it and then click on the red link)
6. Include the following on the page
   1. Paragraph description of the OSAT - why is it AT?
   2. Provide a full BOM
   3. Picture of completed print
   4. Upload and link to all source files
   5. Upload and link to all STLs
   6. Provide directions for print/assembly

, directions, explanation of what it is and a price estimate for a commercial equivalent)

1. Print component and bring to class
2. Add picture and link to your project page in gallery below.