We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Difference between revisions of "777 Customizer project"

From Appropedia
Jump to navigation Jump to search
Line 36: Line 36:
 
Image: MY4777 Bracket.JPG | [https://www.thingiverse.com/thing:3146713 Customizable Shelf Bracket]
 
Image: MY4777 Bracket.JPG | [https://www.thingiverse.com/thing:3146713 Customizable Shelf Bracket]
 
Image: NamePLateScreenGrab.jpg | [https://www.thingiverse.com/thing:3144640 Customizable Name Plate]
 
Image: NamePLateScreenGrab.jpg | [https://www.thingiverse.com/thing:3144640 Customizable Name Plate]
 +
 
</gallery>
 
</gallery>

Revision as of 16:23, 10 October 2018

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.



This project is to design a customizable OpenSCAD script.

  1. Using OpenSCAD either design an original customizable object, or adapt an existing scad file you find online to work with the open source customizer.
  2. Make it printable (you do not need to print it) for your RepRap
  3. Post your SCAD and STL of your design on Thingiverse (if a derivative make sure you give attribution with an OS license)
  4. Add a rendering of your project along with the link to Thinkiverse in the gallery below following the example.

Optional

  1. If your project turned out really nice you can print it for show and tell
  2. Bonus if your design has high utility and you set up a webpage with the OS customizer along with instructions on how to do it(see: Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD)

Gallery

Add your image and link the gallery below in a single line after the last one in the list