Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "777 Customizer project"

From Appropedia
Jump to: navigation, search
m
Line 96: Line 96:
 
Image:Bulbshade.png | Customization, Bulb Shade https://www.thingiverse.com/thing:3893990
 
Image:Bulbshade.png | Customization, Bulb Shade https://www.thingiverse.com/thing:3893990
 
Image:Spark Plug Wire Holder2.jpg |[https://www.thingiverse.com/thing:3908050 Link to your customizer mini project on Thingiverse]
 
Image:Spark Plug Wire Holder2.jpg |[https://www.thingiverse.com/thing:3908050 Link to your customizer mini project on Thingiverse]
 +
|Image:Behereau dice.PNG |[https://www.thingiverse.com/thing:283083 Link to your customizer mini project on Thingiverse]
 
</gallery>
 
</gallery>

Revision as of 17:10, 10 October 2019

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.



This project is to design a customizable OpenSCAD script.

  1. Using OpenSCAD either design an original customizable object, or adapt an existing scad file you find online to work with the open source customizer.
  2. Make it printable (you do not need to print it) for your RepRap
  3. Post your SCAD and STL of your design on Thingiverse (if a derivative make sure you give attribution with an OS license)
  4. Add a rendering of your project along with the link to Thinkiverse in the gallery below following the example.

Optional

  1. If your project turned out really nice you can print it for show and tell
  2. Bonus if your design has high utility and you set up a webpage with the OS customizer along with instructions on how to do it(see: Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD)


Add your image and link the gallery below in a single line after the last one in the list