Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

3d Printing

From Appropedia
Revision as of 14:39, 21 October 2014 by Jeltez42 (talk | Contributions) (Created page with "<!-- Comments that appear only in the edit view are formatted like this. --> <!-- These comments are offered as an aid as you get started. Remove as you wish. --> <!-- next li...")
(Difference) ← Older revision | Latest revision (Difference) | Newer revision → (Difference)
Jump to navigation Jump to search
Sample photo caption.
Delta 3D Printing

As an MTU environmental engineering grad student, having the ability to print equipment for my research is key. I am looking forward to printing the body of a drone that I will use for observing ice and snow pack.

Understanding the market[edit]

Drones exist in the market but they are very costly. By building my own, I can fly mine as a hobbyist and would not have to have a pilot's license or pay someone with a license to make these flights. These flights will be under 100 feet and a light weight drone with a small camera is what is planned.

Project goals[edit]

The ultimate goal is to better measure and model snow pack to help with modeling spring floods so as to not cause problems with the power grid.


quad copter.


You may describe your costs here.

header 1 header 2 header 3
row 1, cell 1 row 1, cell 2 row 1, cell 3
row 2, cell 1 row 2, cell 2 row 2, cell 3

See Help:Tables and Help:Table examples for more.


Your discussion.

Next steps[edit]

The next steps.


Your conclusions.


Contact details[edit]

Add your contact information.