3D printable science equipment: Difference between revisions

Revision as of 01:17, 3 June 2014

This gallery was generated from the designs [1]. Most of the devices are 3D printable - although some of the designs are shown fabricated by other means (e.g. laser cutting).

On to page 2: 3D printable science equipment page 2 or on to page 3:3D printable science equipment page 3

Continue: 3D printable science equipment page 2

@@ Line 3: / Line 3: @@
 [[category:MOST]]
-This gallery is being generated from the designs [http://www.thingiverse.com/jpearce/collections/open-source-scientific-tools] and [http://www.thingiverse.com/jpearce/collections/open-source-optics] will be put [[:Category:Open source optics ]]
+[[Category:Open source scientific hardware]]
+This gallery was generated from the designs [http://www.thingiverse.com/jpearce/collections/open-source-scientific-tools]. Most of the devices are 3D printable - although some of the designs are shown fabricated by other means (e.g. laser cutting).
+On to page 2: [[3D printable science equipment page 2]] or on to page 3:[[3D printable science equipment page 3]]
 {{Gallery
@@ Line 9: / Line 13: @@
 |height=135
 |title=3D printable science equipment
-|lines=4
+|
+lines=4
+|Image:FU76H53HAQ3DHQ1.LARGE.jpg|[http://www.instructables.com/id/DIY-BioPrinter/ DIY BioPrinter]
+|Image:BiropetteRack.jpg|[http://www.thingiverse.com/thing:257254 Rack for Biropettes, Customizable]
+|Image:BiropettePipette.jpg|[http://www.thingiverse.com/thing:255519 Biropette: customisable, high precision pipette]
+|Image:CellStruder2.jpg|[http://www.thingiverse.com/thing:251647 CellStruder v2]
+|Image:CellStruder1.jpg|[http://www.thingiverse.com/thing:109040 CellStruder v1]
+|Image:WindAnemometer.jpg|[http://www.thingiverse.com/thing:245025 Wind direction anemometer]
+|Image:SlideHolder.jpg|[http://www.thingiverse.com/thing:243580 Zeiss Slide Holder]
 |Image:Windgauge.jpg|[http://www.thingiverse.com/thing:241608 Wind gauge]
 |Image:Motormount.jpg |[http://www.thingiverse.com/thing:208430 Stage axis - with parametric motor mount]
@@ Line 51: / Line 64: @@
 |Image:CentrifugeTubeHolder.jpg |[http://www.thingiverse.com/thing:54578 15ml Conical Centrifuge Tube Holder]
 |Image:CuvetteAdapter.jpg |[http://www.thingiverse.com/thing:165731 Spectronic 20 Cuvette Adapter]
-|Image:File:LabPipette.jpg |[http://www.thingiverse.com/thing:159052 Laboratory Pipette]
+|Image:LabPipette.jpg |[http://www.thingiverse.com/thing:159052 Laboratory Pipette]
 |Image:HoseBarbAdapter.jpg |[http://www.thingiverse.com/thing:158717 Hose barb adapter and manifold]
 |Image:Stevenson-screen.jpg |[http://www.thingiverse.com/thing:158039 Stevenson screen for weather station]
@@ Line 91: / Line 104: @@
 |Image:RecyclingPipetteStand.jpg |[http://www.thingiverse.com/thing:91209 Recycling Pipette Stand]
 |Image:VolumeStrawPipette.jpg |[http://www.thingiverse.com/thing:74502 Adjustable Volume Straw Pipette (simpler plunger)]
+|Image:MicroscopeFocusLock.jpg|[http://www.thingiverse.com/thing:85698 A Printable Microscope Focus Lock Upgrade]
+|Image:Lidar3Dscanner.jpg|[http://www.thingiverse.com/thing:86042 VirtuRange LIDAR 3D-Scanner]
+|Image:StevensonScreen.jpg|[http://www.thingiverse.com/thing:83969 Stevenson screen for wireless meteorological sensor]
+|Image:LasercutTubeRack.jpg|[http://www.thingiverse.com/thing:80442 Lasercut test tubes rack]
+|Image:MagneticRackTubes.jpg|[http://www.thingiverse.com/thing:79424 Magnetic Rack for 8, 1.5mL Tubes]
+|Image:96wellPlate.jpg|[http://www.thingiverse.com/thing:79430 96 well plate / 0.2 mL strip tube Magnet Rack]
+|Image:EppendorfTube.jpg|[http://www.thingiverse.com/thing:49398 Eppendorf tube 1,5 ml rack snap-together module]
+|Image:15-50mLtubeRack.jpg|[http://www.thingiverse.com/thing:79529 Combination 15 and 50mL Tube Rack]
-<!-- Start at Page 8 of Scientific Tools www.thingiverse.com/jpearce/collections/open-source-scientific-tools/page:8 -->
+<!-- NOTE -- new page for overflow is here: [[3D printable science equipment page 2]] Start at Page 10 of Scientific Tools www.thingiverse.com/jpearce/collections/open-source-scientific-tools/page:8 -->
@@ Line 98: / Line 121: @@
 }}<noinclude>
+Continue: [[3D printable science equipment page 2]]
 ===See also===
 * [[Open-source lab]]