3D Printing Basics:MOST: Revision history

22 May 2023

• curprev 13:4313:43, 22 May 2023‎ Irene92 talk contribs‎ m 2,444 bytes +1‎ No edit summary undo

2 March 2022

• curprev 16:1216:12, 2 March 2022‎ Page script talk contribs‎ 2,443 bytes +1‎ Move Template:Page data to the bottom undo

13 December 2021

• curprev 13:3013:30, 13 December 2021‎ Page script talk contribs‎ 2,442 bytes +15‎ Add Template:Page data undo

24 July 2014

• curprev 16:4016:40, 24 July 2014‎ J.M.Pearce talk contribs‎ m 2,427 bytes −1‎ No edit summary undo
• curprev 14:4214:42, 24 July 2014‎ J.M.Pearce talk contribs‎ m 2,428 bytes +131‎ No edit summary undo

18 July 2014

• curprev 00:5700:57, 18 July 2014‎ J.M.Pearce talk contribs‎ m 2,297 bytes +16‎ No edit summary undo

14 January 2014

• curprev 10:3210:32, 14 January 2014‎ J.M.Pearce talk contribs‎ m 2,281 bytes +59‎ No edit summary undo

13 January 2014

• curprev 15:1315:13, 13 January 2014‎ Gcanzalo talk contribs‎ m 2,222 bytes 0‎ No edit summary undo
• curprev 15:1215:12, 13 January 2014‎ Gcanzalo talk contribs‎ m 2,222 bytes −4‎ No edit summary undo
• curprev 15:1215:12, 13 January 2014‎ Gcanzalo talk contribs‎ 2,226 bytes +60‎ No edit summary undo
• curprev 15:1015:10, 13 January 2014‎ Gcanzalo talk contribs‎ 2,166 bytes +7‎ No edit summary undo
• curprev 15:0915:09, 13 January 2014‎ Gcanzalo talk contribs‎ 2,159 bytes +2,159‎ Created page with "The part is printed on the build platform, which ideally would be perfectly flat and normal (90 degrees) to the z-axis. Most people, including us at MOST) use glass for the bu..."