(Created page with "{{777}} ==OSAT 3D Printed Gravity Light == Project developed by Josh Mucinski and John Risch {{Statusboxtop}} {{status-design}} {{status-prototype}} You can help Appropedia b...") |
|||
| Line 18: | Line 18: | ||
== Bill of Materials== | == Bill of Materials== | ||
From [http://www.thingiverse.com/thing:1727833 | 3d Printed Gears] | |||
== Tools needed for fabrication of the OSAT== | == Tools needed for fabrication of the OSAT== | ||
Revision as of 14:13, 8 December 2016
OSAT 3D Printed Gravity Light
Project developed by Josh Mucinski and John Risch
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
- OSAT 3D Printed Gravity Light
-
-
-
Bill of Materials
From | 3d Printed Gears
Tools needed for fabrication of the OSAT
Skills and Knowledge Necessary to Make the OSAT
Technical Specifications and Assembly Instructions
- Work in progress*
Common Problems and Solutions
Cost savings
.
</nowiki>