No edit summary
(45 intermediate revisions by 5 users not shown)
Line 1: Line 1:
<!-- Comments that appear only in the edit view are formatted like this. -->
<!-- These comments are offered as an aid as you get started. Remove as you wish. -->
<!-- next line is the code for inserting an image; delete if you don't have an image yet -->
[[File:a.jpg|thumb|right|The Solar Charger or Emergency Light.]]
[[File:a.jpg|thumb|right|The Solar Charger or Emergency Light.]]
{{Statusboxtop}}
{{status-design}}
{{status-model}}
{{status-prototype}}
{{boxbottom}}


<center>''You can put an abstract (a brief description of your project) here. ''</center>
== Project Description ==


Some introduction text and background can go here.
'''This is a solar charger or an emergency light.''' The case design is [[open source]] and can be fabricated on an [[open source 3-D printer]].<ref name="thingiverse">Thingiverse - The Solar Charger/Emergency Light [http://www.thingiverse.com/thing:39348]</ref>


== Understanding the market ==


This is where you can describe what already exists, what is needed, etcYou may want to include inline references. <ref> You can use the ref code to include inline referencesSee [[Help:Footnotes]] for more.</ref>
It runs on a 6660 mAh [[battery]].  The unit mAh measures the battery's capacity and 6660 represents the battery's ability to deliver 6.6 amps per hour.  Amps, is the abbreviation for [[amperes]], that means it gauges the amount of electrons that passes through a given pointIn other words, this battery will be able to provide 24 hours of light source to a given object or space, or multiple phone chargesTo maximize the charging of this device using [[solar energy]], or [[photovoltaic]] methods, the angle of the solar panels can be modified.


To make bullets use the asterisk:
This type of technology can be classified as an [[Open Source Appropriate Technology]] (OSAT).  It is available for any user to view or edit,<ref name="thingiverse"/> and it is a technique that is easy and economically used from readily available materials indigenous to local communities to meet their needs.
* Like this
* and like this
** and two for the next indent
* and back to one...


== Project goals ==
== Applications ==


Describe project goals here.
There are many ways the solar charger can be used. Some are mentioned below:


To make a numbered list use the pound sign:
# Charging various electronic devices such as phones, iPods, or cameras
# Like this
# This solar charger is very portable (200mm/20cm in length)
# and like this
# See [[Help:Contents]] for more formatting code.


== Gallery ==   
== Gallery ==   


<gallery caption="Sample gallery">
<gallery caption="The Solar Charger">
File:c.jpg|This Solar Charger can also be used as an Emergency Light
File:c.jpg|This solar charger can also be used as an emergency light
File:hh.jpg|Inside the Solar Charger  
File:hh.jpg|Inside the Solar Charger
File:angle.jpg|The angle of the solar panels can be modified for maximum charging
File:backa.jpg|The back of the solar charger without the emergency light illuminated
File:case.jpg|The case in STL format
File:topa.jpg|The top in STL format
File:left arm.jpg|The left arm in STL format
File:right arma.jpg|The right arm in STL format
File:light.jpg|The light bar in STL format
</gallery>
</gallery>


=== Next level heading ===
STL format refers to standard tessellation languageIt describes the surface geometry without any color or texture specifications to the [[3-D printer]] before printing.
 
You may need deeper level headingsJust keep adding equal signs to get that.
 
== Costs ==
 
You may describe your costs here.
{| class="wikitable"
|-
! header 1
! header 2
! header 3
|-
| row 1, cell 1
| row 1, cell 2
| row 1, cell 3
|-
| row 2, cell 1
| row 2, cell 2
| row 2, cell 3
|}
See [[Help:Tables]] and [[Help:Table examples]] for more.


== Discussion ==
== Discussion ==


This Solar Charger has already been tested and is successful.
This solar charger has already been tested and is successful.<ref name="thingiverse"/>
 
=== Next steps ===
 
The next steps.
 
== Conclusions ==
 
Your conclusions.


== References ==
== References ==
* [https://www.survivalrenewableenergy.com/top10-10-best-solar-power-bank/ Solar Power Bank For Charging Your Devices Efficiently] 
* [https://www.thecrazybuyers.com/best-solar-power-banks/ Solar Power Bank for Mobile Phones] 
{{reflist}}


Thingiverse - The Solar Charger/Emergency Light
[http://www.thingiverse.com/thing:39348]




<!-- Don't change the next line unless you intend to change the categorization -->
<!-- Do add additional, appropriate categories.  See http://www.appropedia.org/Appropedia:CategoryTree for ideas. -->
[[Category:Projects]]
[[Category:Projects]]
[[Category:OSAT 3D-Printable Designs]]
[[category:photovoltaics]]

Revision as of 09:52, 5 March 2019

The Solar Charger or Emergency Light.

Template:Statusboxtop Template:Status-design Template:Status-model Template:Status-prototype Template:Boxbottom

Project Description

This is a solar charger or an emergency light. The case design is open source and can be fabricated on an open source 3-D printer.[1]


It runs on a 6660 mAh battery. The unit mAh measures the battery's capacity and 6660 represents the battery's ability to deliver 6.6 amps per hour. Amps, is the abbreviation for amperes, that means it gauges the amount of electrons that passes through a given point. In other words, this battery will be able to provide 24 hours of light source to a given object or space, or multiple phone charges. To maximize the charging of this device using solar energy, or photovoltaic methods, the angle of the solar panels can be modified.

This type of technology can be classified as an Open Source Appropriate Technology (OSAT). It is available for any user to view or edit,[1] and it is a technique that is easy and economically used from readily available materials indigenous to local communities to meet their needs.

Applications

There are many ways the solar charger can be used. Some are mentioned below:

  1. Charging various electronic devices such as phones, iPods, or cameras
  2. This solar charger is very portable (200mm/20cm in length)

Gallery

STL format refers to standard tessellation language. It describes the surface geometry without any color or texture specifications to the 3-D printer before printing.

Discussion

This solar charger has already been tested and is successful.[1]

References

Template:Reflist

  1. 1.0 1.1 1.2 Thingiverse - The Solar Charger/Emergency Light [1]
Cookies help us deliver our services. By using our services, you agree to our use of cookies.