La construcción con balas de paja ofrece un buen aislamiento térmico , masa térmica y (dependiendo de los otros materiales elegidos) solo componentes naturales, con beneficios para la calidad del aire interior .
La construcción con pacas de paja ha existido desde principios del siglo XX. Muchas de las estructuras construidas en ese entonces todavía están en pie y en uso. Algunos ejemplos de construcción con pacas de paja son casas, granjas, iglesias, centros comunitarios, etc.
La paja es material en fardos de avena, cebada, arroz y otros. Tradicionalmente, eran los productos de desecho que los agricultores no cultivaban bajo la tierra. En cambio, se usó como ropa de cama o suministro de paisaje debido a su durabilidad. Es esencialmente el material vegetal seco que queda después de que una planta ha sido cosechada para obtener semillas.
Sumario
Materiales necesarios
Los fardos de paja son la clave para la construcción con fardos de paja. Se debe usar malla de alambre para mantener estos materiales juntos para que sean estructuralmente resistentes. A veces se usa un marco de madera para colocar las paredes para que tenga una base de lo que está haciendo. Los marcos se pueden usar para colocar ventanas y puertas en el edificio. Después de que todo esté listo, se puede aplicar estuco de fibra de vidrio a las paredes de paja. Después de dejar que se asiente, sus paredes deben ser resistentes. No olvide tener en cuenta la plomería y el cableado también. Después de que tu casa esté construida, siéntete libre de amueblarla con lo que quieras. Se pueden colocar pisos de madera, así como sótanos, pero asegúrese de que su base sea lo suficientemente fuerte como para sostenerse. Para aprender sobre la construcción de un hombre, prueba este artículo: [1]
Habilidades y conocimientos necesarios
La construcción con pacas de paja es esencialmente lo mismo que la construcción de un edificio para una casa. Todo lo que necesita hacer es asegurarse de que sus paredes estén selladas correctamente para que no entre humedad ni oxígeno. Cualquier contratista puede ser contratado para esto o puede hacerlo usted mismo. Uno debe ser capaz de leer planos y poder operar maquinaria pesada. Además, debe poder comprender los planos para que, si surge un problema, pueda volver a leer y descubrir qué salió mal.
Straw bale building typically consists of stacking rows of bales (often in running-bond) on a raised footing or foundation, with a moisture barrier or capillary break between the bales and their supporting platform. Bale walls can be tied together with pins of bamboo, rebar, or wood (internal to the bales or on their faces), or with surface wire meshes, and then stuccoed or plastered, either with a cement-based mix, lime-based formulation, or earth/clay render. The bales may actually provide the structural support for the building ("load-bearing" or "Nebraska-style" technique), as was the case in the original examples from the late 19th century.
Alternatively, bale buildings can have a structural frame of other materials, usually lumber or timber-frame, with bales simply serving as insulation and plaster substrate, ("infill" or "non-loadbearing" technique), which is most often required in northern regions and/or in wet climates. In northern regions, the potential snow-loading can exceed the strength of the bale walls. In wet climates, the imperative for applying a vapor-permeable finish precludes the use of cement-based stucco commonly used on load-bearing bale walls. Additionally, the inclusion of a skeletal framework of wood or metal allows the erection of a roof prior to raising the bales, which can protect the bale wall during construction, when it is the most vulnerable to water damage in all but the most dependably arid climates. A combination of framing and load-bearing techniques may also be employed, referred to as "hybrid" straw bale construction.
Open Source Strawbale designs
An open-source straw bale housing prototype has been developed by the Open Architecture Network
This simple Open Source home design grew out of a desire to share a easy-to-construct straw bale prototype for humanitarian applications. The barrier-free floor plan, comprised of a concentrated wet core within an insulating straw bale envelope, allows for an efficient layout within a small footprint. This system can scale up or down, orient to solar and wind patterns for passive heating and cooling, and be partitioned flexibly in order to adapt to changing inhabitant needs.
This Open Source design also takes advantage of solar gain. Winter sunlight enters south-facing windows and charges a thermal mass in the floor. A radiant floor system provides supplementary heating. Attic insulation is post-consumer cellulose (i.e., newspaper). A frost-protected shallow foundation obviates the need of excavation below frost line and is therefore less invasive than conventional cold-weather foundations.
Estimated Costs
Cost all depends on the design of the building. Location is a main key to this as well. Questions that should be asked should be about regulations, building codes, structural sustainability, etc. Straw bale construction is much cheaper though in terms of wood foundations. This can be one of the most economical wall systems. Houses have been constructed for as low as $10.00 per square foot (floor area) to high end homes at $100.00 per square foot.
Related projects
See also
External links
- Straw bale house forums at Permies.com
- Wikipedia:Straw bale construction
- A Wikibook on Straw bale construction
- http://www.strawbale.com/
- California strawbale code
- A Sourcebook for Green and Sustainable Building: http://www.greenbuilder.com/sourcebook/strawbale.html#Define