The following pages link to Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines:
Displayed 50 items.
- Life cycle analysis of distributed polymer recycling (← links | edit)
- Distributed recycling of post-consumer plastic waste in rural areas (← links | edit)
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules (← links | edit)
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament (← links | edit)
- Improving recyclebot concepts (← links | edit)
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System (← links | edit)
- Factors effecting real-time optical monitoring of fused filament 3D printing (← links | edit)
- Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views (← links | edit)
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing (← links | edit)
- Wood Furniture Waste-Based Recycled 3-D Printing Filament (← links | edit)
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament (← links | edit)
- Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties (← links | edit)
- 3D printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing (← links | edit)
- Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing (← links | edit)
- Systems Analysis for PET and Olefin Polymers in a Circular Economy (← links | edit)
- Open Source Completely 3-D Printable Centrifuge (← links | edit)
- Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing (← links | edit)
- Open Source Waste Plastic Granulator (← links | edit)
- Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades (← links | edit)
- Open Source Computer Vision-based Layer-wise 3D Printing Analysis (← links | edit)
- Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy (← links | edit)
- Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers (← links | edit)
- Potential of distributed recycling from hybrid manufacturing of 3-D printing and injection molding of stamp sand and acrylonitrile styrene acrylate waste composite (← links | edit)
- Open-Source Grinding Machine for Compression Screw Manufacturing (← links | edit)
- Real-Time Eye State Detection System for Driver Drowsiness Using Convolutional Neural Network (← links | edit)
- Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks (← links | edit)
- Image Analysis Method for Quantifying Snow Losses on PV Systems (← links | edit)
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines (transclusion) (← links | edit)
- Systems Analysis Approach to Polyethylene Terephthalate and Olefin Plastics Supply Chains in the Circular Economy: A Review of Data Sets and Models (← links | edit)
- Open source disease analysis system of cactus by artificial intelligence and image processing (← links | edit)
- Sustainability and Feasibility Assessment of Distributed E-Waste Recycling using Additive Manufacturing in a Bi-Continental Context (← links | edit)
- Towards Smart Monitored AM: Open Source in-Situ Layer-wise 3D Printing Image Anomaly Detection Using Histograms of Oriented Gradients and a Physics-Based Rendering Engine (← links | edit)
- Evaluation of lab performance of stamp sand and acrylonitrile styrene acrylate waste composites without asphalt as road surface materials (← links | edit)
- Finding Ideal Parameters for Recycled Material Fused Particle Fabrication-Based 3D Printing Using an Open Source Software Implementation of Particle Swarm Optimization (← links | edit)
- Monofacial vs bifacial solar photovoltaic systems in snowy environments (← links | edit)
- Waste Plastic Direct Extrusion Hangprinter (← links | edit)
- Technical and Economic Viability of Distributed Recycling of Low-density Polyethylene Water Sachets into Waste Composite Pavement Blocks (← links | edit)
- Hangprinter for Large Scale Additive Manufacturing using Fused Particle Fabrication with Recycled Plastic and Continuous Feeding (← links | edit)
- Snow Losses for Photovoltaic Systems: Validating the Marion and Townsend Models (← links | edit)
- The Potential of Replacing Concrete with Sand and Recycled Polycarbonate Composites: Compressive Strength Testing (← links | edit)
- Recycled Polycarbonate and Polycarbonate/Acrylonitrile Butadiene Styrene Feedstocks for Circular Economy Product Applications with Fused Granular Fabrication-Based Additive Manufacturing (← links | edit)
- MOST completed publications and projects (← links | edit)
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/vi (← links | edit)
- Multi-material distributed recycling via material extrusion: recycled high density polyethylene and poly (ethylene terephthalate) mixture (← links | edit)
- Distributed Recycling and Manufacturing (← links | edit)
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/pt (← links | edit)
- Synthetic-to-real Composite Semantic Segmentation in Additive Manufacturing (← links | edit)
- Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines/ru (← links | edit)
- Optimizing Strawberry Disease and Quality Detection with Vision Transformers and Attention-Based Convolutional Neural Networks (← links | edit)
- Tool change reduction for multi-color fused filament fabrication through interlayer tool clustering implemented in PrusaSlicer (← links | edit)