We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Changes

Jump to navigation Jump to search

Dial Indicator

1 byte added, 14:52, 10 December 2018
== Technical Specifications and Assembly Instructions==
# * Download and print the plastic components listed in the bill of materials** Recommended:
Material: PLA
Layer Height: 0.25 mm
Print Speed: 50 mm/s
Printing Temperature: 215 C
# * Clean burrs and excess plastic from parts that may be remaining from print# * Align the corresponding components from the bill of materials to the pictures posted below while ensuring:## ** All holes align## ** All gears mesh together
[[Image:Open Gears.jpg|200px]]
[[Image:SpacerAlignment.jpg|200px]]
[[Image:Rear.jpg|200px]]
[[Image:Dial Indicator Front.jpg|200px]]
# * Assemble Fasteners so that the head of the screws are on the face of the indicator# * Lightly tighten fasteners so that gears spin freely with minimal slop# * Assemble needle so that needle is spaced away from dial face# * Once completed, use a protractor to mark the face of the indicator in whichever scale is desired
== Common Problems and Solutions==
85

edits

Navigation menu