We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Changes

Jump to navigation Jump to search

Dial Indicator

4,110 bytes added, 19:47, 7 December 2018
== Hemostats ==
Project developed by [[User:Patrick Gilland]]
{{Statusboxtop}}
{{status-design}}
{{status-prototype}}
You can help Appropedia by contributing to the next step in this [[OSAT]]'s [[:Category:Status|status]].
{{boxbottom}}
 
==Abstract==
# firstA dial indicator is a tool used to measure linear displacements.It accomplishes so via the use of a plunger that's constricted to a measured linear movement.Simply, when the plunger is pushed into the body of the tool, the distance it is pushed in is "indicated" on the "dial" face of the tool.This is useful for any kind of precise measurement of thickness, depth, width, and can even be used to ensure a machining device or tool is accurately trammed.  # Picture of completed print using your printer [[Image:Hemostat.jpg|200px|right]] == Bill of Materials== {| class="wikitable"|-! Part ! Quantity! Source! Comments|-| PLA| ~XX grams| Filament supplier of choice| Color of choice|-| Dial Indicator Body| 1| [/ Youmagine]| Using PLA|-| Dial Indicator Top| 1| [/ Youmagine]| Using PLA|-| Spacer| 3| [/ Youmagine]| Using PLA|-| Dial Indicator Needle| 1| [/ Youmagine]| Using PLA|-| Gear 1-2| 1| [/ Youmagine]| Using PLA|-| Gear 3-4| 1| [/ Youmagine]| Using PLA|-| Gear 5-6| 1| [/ Youmagine]| Using PLA|-| Dial Indicator Plunger| 1| [/ Youmagine]| Using PLA|-| Gear 7| 1| [/ Youmagine]| Using PLA|-| 1/8 Diameter Button Head Cap Screw 1 inch long| 3| | |-| 1/8 Diameter Button Head Cap Screw 1.25 inch long| 1| | |-| 1/8 Diameter Nylock Nut| 4| | |-| 1/8 Inner Diameter Washer| 8| | |-|}  NUT & BOLT DIMENSIONS MAY CHANGE WITH CUSTOMIZATION OF PRINT == Tools needed for fabrication of the OSAT==# [[Athena Build Overview| MOST Delta RepRap]] or similar RepRap 3-D printer# Phillips head screw driver# 5.5 mm wrench TOOL REQUIREMENTS MAY VARY BASED ON NUT & BOLT SELECTION == Skills and Knowledge Necessary to Make the OSAT ==* 3D Printing Knowledge & Capabilities* Understand the needs & application for the most efficient customization == Technical Specifications and Assembly Instructions==# Customize & Print 2 copies of the Hemostats* It is recommended to print around 30 mm/s with a 100% infill# Orient the two printed pieces so that:## The holes align## The finger holes of the prints are on opposite sides ## Locking wedges are pointing toward each other for proper engagement# Insert bolt into hole. (Direction does not matter)# Engage the nut onto the bolt.# Tighten with very little force using a screw driver and a wrench. (Over tightening will the limit the ability of the hemostats.== Common Problems and Solutions==* Make sure that the wedges that lock into each other are both wide enough and deep enough so that they do not break when you try and lock the Hemostats down.* Make sure the nut & bolt are loose enough to allow free movement of the hemostats.* Make sure the all of the pieces are thick enough as to not bend under forces ('''minimum of 4mm thickness is recommended''') == Cost savings==* 25g of PLA ($0.40 USD) + 3mm Nut ($0.13 USD) + 3mm x 12mm bolt ($0.33 USD) = '''$0.86 USD Total'''* Compared to '''$4.27 USD''' [https://www.amazon.com/Stainless-Hemostat-Mosquito-Straight-5-Inch/dp/B004C32AIQ/ref=sr_1_4?s=pet-supplies&ie=UTF8&qid=1544113930&sr=1-4&keywords=hemostats Cheapest Hemostats I Could Find]* '''Cost savings of $3.41 USD (79.9% cost savings)'''* '''The biggest benefit is not cost, but availability''' when Amazon delivery is not an option in a remote or devastated area. == Benefited Internet Communities =='''Name and add links to at least 5 using single brackets around [url name]:'''*[http://www.appropedia.org/777_OSAT_projects_2018 Appropedia OSAT Project for MY4777]*[https://www.fieldready.org/overview-1 Field Ready]*[https://supply.unicef.org/unicef_b2c/app/displayApp/(layout=7.0-12_1_66_67_115&carea=%24ROOT)/.do?rf=y Unicef]*[https://github.com/ Gitbug]*[https://www.thingiverse.com/ Thingiverse]
# second...==References==
# third...* These hemostats were designed based on my own used of them
==Bill of Materials==
85

edits

Navigation menu