Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.


Jump to: navigation, search

Solar Pura: High-efficiency vertical solar still

15,269 bytes added, 00:40, 21 February 2018
<!-- Comments that appear only in the edit view are formatted like this. -->
<!-- These comments are offered as an aid as you get started. Remove as you wish. -->
<!-- next line is the code for inserting an image; delete if you don't have an image yet -->
[[File:Solar Pura render.jpeg|thumb|upright=2|right|Render of the Solar Pura prototype in Fusion 360.]]
== Conventional passive Vertical multiple effect diffusion type solar stills vs basin solar stills ==You can learn about the mechanics and history of solar stills here [[solar stills]] and here [[Improving_Basin_Solar_Stills|improving basin solar stills]] and here [[Understanding_Solar_Stills|understanding solar stills]]. These pages have a lot of great information on how single effect basin solar stills function. This design would have to be the norm for low tech solar distillation.   After many experiments and a lot of research I decided that a single effect basin type solar still could not meet these criteria and looked towards more experimental and complex designs. That is how I came across the work of R.V Dunkle and his 1961 paper on the topic of multiple effect diffusion solar stills<ref> Original mutliple effect diffuser paper </ref>. As well as contemporary research groups such as Hiroshi Tanaka et al from Japan<ref> Hiroshi Tanaka home page</ref>. As well as researchers from Taiwan national university also exploring this space <ref> </ref>. The principle behind the vertical multiple effect diffusion solar still is best described visually:[[File:Solar Pura multi effect diffusion principle.jpeg|thumb|upright=2|Multi effect diffusion principle]] The multi effect diffusion principle works by stacking plates very close together to create different cells or 'effects' this is so that the latent heat of vaporization can be recycled multiple times before being dissipated into the atmosphere. From the diagram, Heat enters the device from the left while water is fed from above onto absorbent wicks. The wicks are laminated to one side of the conducting plate while the other side acts as the condenser. When the water on the wick is heated via conduction through the plate it vaporizes and then 'looks' for the next coldest surface to condense upon (the next plate) where it then drips down into a collection gutter that routes the distillate into a storage vessel. This process is repeated for as many effects as the device contains.  Researchers mentioned above have found that around 12 effects is optimal before returns are diminished. With 5mm spacing between plates being optimal to create the effect. This has lead to productivity for these devices to be anywhere from 20 to 40 liters per day per square meter. This is a 4 - 8 x increase in productivity compared to a single effect basin type still.     
To make bullets use the asterisk:
* Like this
* and like this
** and two for the next indent
* and back to one...
== Project goals ==
Describe For my project I developed 5 key design goals hereto focus my research around:* low cost* high efficiency* mobility* robustness * usability.
To make I followed a numbered list use the pound sign:simple iterative methodology with 3 key stages# Like thisResearch - read academic research on the topic and ideate on their findings# and like thisExperiment - develop experimental prototypes to test new concepts# See [[Help:Contents]] Evaluate - learn from experiments for more formatting iteration of development
== Design ==
Describe your design hereThere is very little experimental research that has been done on the construction and optimization of these devices. Most of Tanaka's designs he never built fully functional prototypes, just tested 1 effect and theorized the rest of the work. While the team at Taiwan university did build their prototypes, they were all hooked up to evacuated tube collectors that could supply a steady stream of 100 degree heat to the device. This coupling adds so much cost and complexity that in my eyes moves the technology beyond Appropriate Technology applications.
The inspiration for my design came from the Tanaka's paper from 2005 <!ref> Here and-highly-productive-solar-still-a-vertical-multiple-effect-diffusion-type.html</ref> where in he describes a multi effect diffuser that is coupled to a sample galleryflat plate collector. I was very attracted to this idea because of its integration of the solar collector and the condenser. So from that point to move forward I used 3d CAD tools to flesh out the various systems and went about building my first prototype. I synthesized the literature into a design consisting of 10 key subsystems:*Feed water flow control -Storage of feed water and controlling the rate at which it is fed to the wicks*Frame/mounting ->The way in which all the components are mounted and housed & the spacing between the plates*Absorber - The solar selective surface absorber that absorbs the sun*Optical cover - Mounted in front of the absorber that prevents convective losses*Reflector - Mirrored surface that reflects the sun onto the absorber*Wicking Bed - The way in which the wicks are mounted and fed water*Insulating Panels - Side and back panels that prevent heat loss*Wicks - The material for wicking the feed water down the device*Condenser plates - The plates that act as condensers and conductors to create the multi-effect diffusion reaction*Distillate Collection - The way the distillate flows and is collected  And then I developed a scale prototype to test the interactions between these systems ==Prototype # 1==This was an early prototype to help physically model the different ideas I was trying out. To save on costs I kept it quite small with an approximate absorber area of 300x200mm and 6 effects with 20mm gaps[[File:EarlyProto.jpg|thumb|Testing prototype #1 in the Sun]]  === Feed water flow control ===For this component I made a box with volume around 5 liters. I then drilled a hole and inserted a plastic irrigation valve. This didn't work very well. The control wasnt great enough for the low flow rate I needed === Frame/mounting ===I used qubelock aluminum extrusion(Australian brand). It is a simple system that uses aluminum square tube joined with plastic joiners. this provided room for the plates to be stacked, support to stand the device up and all necessary mounting points.  === Absorber ===Part of my earlier research looked into simple cost effective solar selective surface design. Selective surfaces are special materials that absorb the solar light spectrum very efficiently and emit it out at very low rates. They are very important in high efficiency solar technology however many of the products are proprietary or very expensive. So I looked into the academic research and found that coating a piece of aluminum with a resin infused with finely crushed charcoal to be a very good selective surface. I tried many resins with polyurethane being the highest performing but also somewhat prone to cracking if it gets too hot. Polyethylene is good to but dries very glossy, decreasing quality. I measured temperatures over 80 degrees Celsius on the back of the absorber plate on this prototype(without wicks)[[File:SelectiveSurfacing.jpeg|thumb|right|DIY selective surface]] === Optical cover ===For this prototype I used 2 walled polycarbonate for the optical cover. It provided superior convective heat loss mitigation for the absorber but may have also diminished light transmissivity. === Reflector ===I used Mylar film mounted to plywood with contact adhesive to bond the two. It had no protection from the elements and was damaged easily as well as not providing an optically clear image. I mounted my reflector on a hinge at the base of the absorber and then controlled the tilt with strings that I tied around the device. I used a spring loaded clasp from an old rain jacket to control the length. === Wicking Bed ===This was one of the hardest problems and I spent a lot of time trying to solve it. The idea being that I could mount the wicks with spaces in between them but so that water wouldn't drip down around them. I tried multiple techniques without much success. No matter how I tried to make it water tight. The water would eventually start dripping through. <gallery caption="Sample galleryWicking Fails">File:ImageneededAcrylicSlits.pngjpg|Sample caption textThis first test I laser cut a piece of acrylic and inserted wicks into 1mm slits spaced 10mm apart.This design leaked when water was poured over itFile:ImageneededRubberStack.pngjpg|More sample caption textStacking silicon rubber extrusion with wicks and aluminum plate wedged betweenFile:EvenlyStacked. This would look better jpg|All plates stacked between rubber extrusions. Then with different imageswooden piece screwed on the end to compress. :)File:ImageneededDowelBand.pngjpg|Even more sample caption textThis attempt used bent aluminum glued to wooden dowel with large rubber band wrapped around the dowel. The aim being to provide rigidity and elasticity. The rubber bands were meant to create a gasket so that water would only flow down the wicks. Once all stacked in the channel a piece of wood was fastened to compress them all.
=== Next level heading Insulating Panels ===Panels were made from 5mm plywood with 20mm EVA foam squares glued on. They press fit into the frame and were made so they could be easily taken on and off while testing === Wicks ===Wicks were made from common dish cloths. These were chosen for their inexpensiveness and ubiquity. As well as their wicking properties and antibacterial designs that may help. The problem with this design is that they are only secured at the top and so they dont stay laminated to the aluminum plates, causing contamination. Also there was no way to secure the first wick to the back of the absorber as it was mounted flush to the frame with no gaps.=== Condenser plates ===I used 0.5mm aluminum plates cut 200x300mm. These were integrated into the wicking system for accurate spacing. I tried many mounting techniques but the dowel one worked quite well. Except where the device was out of square and at the bottoms where they were just hanging freely. Without a rigid guide the plates weren't evenly spaced.[[File:AluminumPlates.jpg|thumb|Bent 0.5mm aluminum condenser plates glued to 12x20mm square dowel. Also bent at the base to create the distillate channel ]]=== Distillate Collection ===With the channel at the base of the aluminum plates there were two holes drilled. Under those holes was glued a channel and a hole in that channel to a pipe. That pipe could then be fixed to a bottle or other collection device.[[File:DistillateCollect.jpg|thumb|Upside down view of the prototype. Distillate channels on each side with PVC pipes glued]]==Testing==This device didn't function properly due to issues with leaks and the distillate collection system. But I did test it in sunny conditions in Melbourne Australia with promising amounts of heat (average between 65-70 degrees C) and steam coming out of the device when the panel was removed.  <gallery caption="Side view">File:SideViewP1.jpeg| Side view of the prototypeFile:SideViewP12.jpeg|Removing the easily removable insulated side panelFile:SideViewP13.jpeg|See uneven distribution of wicks and stacking of plates causing problems.</gallery> ==Prototype # 2==After reviewing my previous prototype I attempted to solve the underlying design issues by starting fresh on an improved version. This new iteration solves all of the problems of the first still while being more ambitious in its design. It has more effects, closer together, to improve efficiency. It has a larger reflector area that requires less daily maintenance. It is an all plastic / metal design. It is lightweight because of the all aluminum frame but built solid to last the elements.  It is still of the same dimensions as the previous still to keep costs down while prototyping and because with 12 effects it has the same surface area as a 1 square meter still but in a far smaller package. By integrating the lessons from the previous prototype and the in depth analysis of the relevant literature I have designed a still system that I think is far more robust and closer to something that could be implemented in the field. Manufacturing was completed over a period of weeks. Various innovations were integrated into the design utilizing components from disparate industries. ===CAD design===This design was very focused on precise control of spacing and tight tolerances for manufacturing. Therefore a lot of time was spent in CAD. The design materials for the frame are entierly made from aluminum and polycarbonate. Polycarbonate was the plastic of choice because of its heat resistance up to 120 degrees Celsius. The idea behind the design was around assembly and simplicity[File:SolarPuraCad.jpg|thumb|Cad design in fusion 360 showingg spacing between plates.]] === Feed water flow control ===Flow control was managed first by an IV drip system hacked together from low cost medical technology. A filter to filter out large particulates, a mechanical drip controller and check valve to keep the flow consistant. This was connected to the fiberglass formed 5 liter reservoir with a small elbow joint piece glued in for the outlet. [[File:IVdripcontrol.jpg|thumb|FIlter, mechanical drip controller and check valve]]  ===Frame/Mounting===Frame was made from welded aluminum angle brackets. This created the wicking bed and reservoir housing. The idea being that the device can be assembled from 4 mounting holes with threaded rods. Spacers were lasercut from Polycarbonate for precise control. [[File:SolrPuraFrame.jpg}thumb|Welded aluminum frame with 4 mounting holes for threaded rod]][[File:SolarPuraAssem.jpg\thumb|Assembly of all components]] === Absorber ===Absorber is the same as previous. 3mm aluminum sheet with resin infused with charcoal coating
You may ===Optical Cover===This prototype used 3mm polycarbonate for the cover. It is considerably reflective so need deeper level headingsto source better quality with anti reflective coating. Just keep adding equal signs It also scratched very easily. I first had it mounted inside the frame but this caused it to get thattouch the absorber plate behind it. This created thermal bridging further diminishing the performance. So I mounted it on the outside.
== Costs =Reflector===
You may describe your costs hereThe new reflector design utilizes a longer mirror array.This array is designed to provide more sunlight to the absorber throughout the day without the need to rotate the device. it folds up and is supported by string similar to the first prototype as well as a wire kickstand. There is still some more modelling to be done {[[File:Mirror arraySolar.jpg| class="wikitable"thumb|-! header 1! header 2! header 3|-| row 1, cell 1| row 1, cell 2| row 1, cell 3|-| row 2, cell 1| row 2, cell 2| row 2, cell 3|}See [[Help:Tablesmirrors reflect the light on to the absorber more effectively throughout the day]] and [[Help:Table examples]] for more.
== Discussion =Wicking Bed===This issue turned out to be a kind of non issue. The wicking bed doesn't need to be watertight, it just needs to have a controlled flow of water to the wicks through an interface of other wicks between them and the water flow. This was achieved by wrapping a sponge like wick in a piece of polycarbonate as the first point of wetting. this made the water spread out so that it would slowly wet the wicks mounted underneath. The wicks were mounted in a laser cut grill. they are threaded through and then fixed to the plates with the top and bottom dividers
Your discussion===Insulating Panels===These panels were made from 6mm acrylic with EVA foam glued to them.The back panel afforded more space for insulation but the side panels were very thin. This may contribute to greater heat losses
=== Next steps Wicks ===The wicks were made from a thick non woven fibre dish cloth. These are perfoming quite well and staying laminated to the plates even with such small spaces between.
The next steps===Distillate Collection===My first idea for this was to glue small tubes to the gutter outlets. these then coalesced into a larger tube that had an outlet. This didn't really work. there was not enough force in the water for it to just drip through this system. So I experimented by adding wicks to this process. A string wick through the gutter system into a channel with an outlet hole.
== Conclusions Testing==Testing so far has been indoors as it is June in Melbourne. I have used a 1000w high pressure sodium bulb to test the prototype. This has given interesting results but not particularly realistic. The first tests proved that the mechanism was working.[[File:SolarpuraFirsttest.jpg|thumb|testing indoors showing mechanism of multi effect diffusion]]The initial distillate collection system didn't work so I had to disassemble the device. What I found after disassembly was that there was a black layer on the aluminum plates closest to the heat source. This was identified as galvanic corrosion from the different metals in the design. So i decided to swap out the aluminum plates with polycarbonate. [[File:GalvanicCorrosion.jpg|thumb|Galvanic corrosion]]
Your conclusionsThe next round of testing with improved distillate collection was succesful and small amounts of distillate have been collected.The issue is that the indoor testing rig heats up the feedwater quite dramatically over time and isnt giving realistic outputs. So I will have to wait for warmer weather before getting real test results
== References ==
== Contact details ==
Add your contact informationGet in touch at mflood124875%gmail. com (replace % with @) if you want to know more about the project or chat about solar stills. All plans are freely avaialble by request
<!-- Don't change the next line unless you intend to change the categorization -->
Anonymous user

Navigation menu