Combined display of all available logs of Appropedia. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 18:32, 13 April 2011 CBaechler talk contribs uploaded File:Shaft addition WPE.jpg (custom shaft addition added to the windshield wiper motor used for the Waste plastic extruder drive train.)
- 17:47, 13 April 2011 CBaechler talk contribs uploaded File:Extruder FinishedHeatingZone.JPG (Photo of the finished heating section. Shows Nichrome wire covered with Kapton tape. Refer to Waste plastic extruder for construction instructions.)
- 17:37, 13 April 2011 CBaechler talk contribs uploaded File:Motor brace wpe.jpg (Used to hold the windshield wiper motor in place. Would vary with the windshield wiper motor. I used a 1994 Dodge Neon wiper motor. )
- 17:35, 13 April 2011 CBaechler talk contribs uploaded File:Flange support.jpg (One of the plywood supports I used. These were placed at the flanges to counteract torsional forces and moments.)
- 17:32, 13 April 2011 CBaechler talk contribs uploaded File:Barrel support.jpg (One of the plywood supports I used for the extruder body. These were placed either side of the hopper to help prevent movement axially along the barrel.)
- 17:14, 13 April 2011 CBaechler talk contribs uploaded File:Extruder DriveTrain.JPG (Drive train for extruder. Shows small and large sprocket, chain and tensioning device.)
- 17:12, 13 April 2011 CBaechler talk contribs uploaded File:ExtruderMotor.JPG (Motor used for waste plastic extruder. Mounted on moveable platform to allow for chain tensioning.)
- 17:11, 13 April 2011 CBaechler talk contribs uploaded File:WastePlasticExtruder prototype.jpg (Picture of prototype. Doesn't include spooling device. Shows wooden base, motor and drive train and extruder body. )
- 20:58, 27 March 2011 CBaechler talk contribs uploaded File:Hopper section.jpg (hopper section of pipe or waste plastic extruder)
- 20:53, 27 March 2011 CBaechler talk contribs uploaded File:Heating section.jpg (Heating section of main extruder assembly. Note that piping sections were welded to the flanges.)
- 20:44, 27 March 2011 CBaechler talk contribs uploaded File:Gear section.jpg (Gear section of main extruder body)
- 20:40, 27 March 2011 CBaechler talk contribs uploaded File:Die.jpg (Die used to extruder 3mm filament for use in RepRap. )
- 20:38, 27 March 2011 CBaechler talk contribs uploaded File:Flange.jpg (Flange - used to connect individual pipe sections as well as the die. Connected with fasteners.)
- 20:34, 27 March 2011 CBaechler talk contribs uploaded File:Hopper.jpg (Hopper used on extruder. This part can be modified as needed or desired. )
- 20:26, 27 March 2011 CBaechler talk contribs uploaded a new version of File:Main body assembly.jpg (Fixed file to show full image.)
- 20:15, 27 March 2011 CBaechler talk contribs uploaded File:Main body assembly.jpg (Assembly drawing of the main body structure for waste plastic extruder. Based on design created by Web4Deb.)
- 01:59, 23 April 2010 CBaechler talk contribs uploaded a new version of File:Ramp Loading and FBDs.jpg (Previous uploads were not showing file changes, hopefully this one will,)
- 01:57, 23 April 2010 CBaechler talk contribs uploaded a new version of File:Ramp Loading and FBDs.jpg (Updated orientation and forces. This is the most up to date version and the one used on associated files in the Portable Wheelchair Ramp Design page.)
- 01:55, 23 April 2010 CBaechler talk contribs uploaded a new version of File:Ramp Loading and FBDs.jpg
- 20:41, 15 April 2010 CBaechler talk contribs uploaded File:Ramp Loading and FBDs.jpg (This images shows orthographic views, loading diagrams and free body diagrams for a simple plank ramp. The analysis is used in the page Portable Wheelchair Ramp Design. Refer to this page for notes on the drawing.)
- 14:57, 11 February 2010 CBaechler talk contribs uploaded a new version of File:Document Virtualization ECM.xls (Hey Guys, I changed the IRR setup so that we always get a value. DL, instead of setting the cash flow in baseline to zero, I made a new chart in the Outputs section specifically for IRR. Take a look and see what you think. I think it makes more sense than)
- 18:12, 10 February 2010 CBaechler talk contribs uploaded a new version of File:Document Virtualization ECM.xls (Latest version)
- 04:27, 2 February 2010 CBaechler talk contribs uploaded File:Beachslack.JPG (User page picture.)
- 17:48, 24 January 2010 CBaechler talk contribs uploaded File:Table8 kenyatrussbridge.png
- 14:07, 14 January 2010 User account CBaechler talk contribs was created
