This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 15:36, 31 July 2019 | A4988 adjust motor current0.JPG (file) |  |
169 KB | Ref voltage | 1 |
| 15:29, 31 July 2019 | A4988 pot highlight.JPG (file) |  |
244 KB | Pot | 1 |
| 14:38, 31 July 2019 | Franklin name profile1.png (file) |  |
45 KB | Name profile | 1 |
| 14:37, 31 July 2019 | Franklin name printer.png (file) |  |
44 KB | Name machine | 1 |
| 14:32, 31 July 2019 | Franklin firmware upload initial1.png (file) |  |
73 KB | Upload | 1 |
| 14:27, 31 July 2019 | Franklin setup tab.png (file) |  |
47 KB | Franklin setup | 1 |
| 14:26, 31 July 2019 | Franklin interface.png (file) |  |
39 KB | First Franklin | 1 |
| 14:22, 31 July 2019 | Athena board homepage.png (file) |  |
66 KB | home 1 | 1 |
| 13:16, 31 July 2019 | AthenaII wire limts.JPG (file) |  |
177 KB | Wiring complete | 1 |
| 13:11, 31 July 2019 | AthenaII wire motor.JPG (file) |  |
159 KB | Motors wired | 1 |
| 13:08, 31 July 2019 | AthenaII wire hotend.JPG (file) |  |
649 KB | 2 | |
| 13:02, 31 July 2019 | Athena attach board.JPG (file) |  |
138 KB | 2 | |
| 20:38, 30 July 2019 | Athena board materials.JPG (file) |  |
127 KB | Correct parts | 2 |
| 17:20, 30 July 2019 | AthenaII fixed belt terminator.JPG (file) |  |
133 KB | Correct orientation with respect to motor end | 2 |
| 16:53, 30 July 2019 | Athena attach board mount.JPG (file) |  |
119 KB | Locate board mount | 1 |
| 16:45, 30 July 2019 | Athena board to OPi.JPG (file) |  |
95 KB | mate boards | 1 |
| 16:44, 30 July 2019 | Athena insert sdcard.JPG (file) |  |
113 KB | insert sd card | 1 |
| 16:41, 30 July 2019 | Athena insert motor controllers.JPG (file) |  |
204 KB | insert motor controllers | 1 |
| 16:35, 30 July 2019 | Athena motor controller orientation.JPG (file) |  |
353 KB | Motor_controller_labels | 1 |
| 16:32, 30 July 2019 | Affix heatsinks.JPG (file) |  |
242 KB | Heat sink on motor controller | 1 |
| 14:22, 30 July 2019 | Athena remove hotend bushing.JPG (file) |  |
97 KB | remove hotend bushing | 1 |
| 00:01, 15 June 2018 | AthenaII cura toolpath save 2.png (file) |  |
5 KB | G.C. Anzalone | 1 |
| 00:01, 15 June 2018 | AthenaII cura prepare.png (file) |  |
4 KB | G.C. Anzalone | 1 |
| 23:59, 14 June 2018 | AthenaII cura load.png (file) |  |
9 KB | G.C. Anzalone | 1 |
| 23:49, 14 June 2018 | AthenaII cura adhesion.png (file) |  |
42 KB | G.C. Anzalone | 1 |
| 23:49, 14 June 2018 | AthenaII cura cooling.png (file) |  |
38 KB | G.C. Anzalone | 1 |
| 23:49, 14 June 2018 | AthenaII cura zhop.png (file) |  |
36 KB | G.C. Anzalone | 1 |
| 23:48, 14 June 2018 | AthenaII cura speed.png (file) |  |
33 KB | G.C. Anzalone | 1 |
| 23:48, 14 June 2018 | AthenaII cura temperature.png (file) |  |
30 KB | G.C. Anzalone | 1 |
| 23:48, 14 June 2018 | AthenaII cura infill.png (file) |  |
27 KB | G.C. Anzalone | 1 |
| 23:47, 14 June 2018 | AthenaII cura layer height.png (file) |  |
24 KB | G.C. Anzalone | 1 |
| 23:47, 14 June 2018 | AthenaII cura view.png (file) |  |
48 KB | G.C. Anzalone | 1 |
| 23:24, 14 June 2018 | AthenaII cura preferences.png (file) |  |
61 KB | G.C. Anzalone | 1 |
| 23:24, 14 June 2018 | AthenaII cura extruder settings.png (file) |  |
25 KB | G.C. Anzalone | 1 |
| 23:23, 14 June 2018 | AthenaII cura machine settings.png (file) |  |
34 KB | G.C. Anzalone | 1 |
| 23:23, 14 June 2018 | AthenaII cura printer.png (file) |  |
31 KB | G.C. Anzalone | 1 |
| 23:22, 14 June 2018 | AthenaII cura othermachine.png (file) |  |
53 KB | G.C. Anzalone | 2 |
| 19:04, 14 June 2018 | AthenaII melzi power jumper.JPG (file) |  |
98 KB | G.C. Anzalone | 1 |
| 19:03, 14 June 2018 | AthenaII mark positive terminal.JPG (file) |  |
66 KB | G.C. Anzalone | 1 |
| 19:02, 14 June 2018 | AthenaII secure powerentry.JPG (file) |  |
90 KB | G.C. Anzalone | 1 |
| 18:59, 14 June 2018 | AthenaII position electronics.JPG (file) |  |
91 KB | G.C. Anzalone | 1 |
| 18:58, 14 June 2018 | AthenaII bridge board1.JPG (file) |  |
101 KB | G.C. Anzalone | 1 |
| 18:56, 14 June 2018 | AthenaII bridge board0.JPG (file) |  |
73 KB | G.C. Anzalone | 1 |
| 18:53, 14 June 2018 | AthenaII assembled printer.JPG (file) |  |
69 KB | G.C. Anzalone | 1 |
| 18:51, 14 June 2018 | AthenaII attach mirror.JPG (file) |  |
56 KB | G.C. Anzalone | 1 |
| 18:44, 14 June 2018 | AthenaII attach wire retainer.JPG (file) |  |
70 KB | G.C. Anzalone | 1 |
| 18:42, 14 June 2018 | AthenaII bowden sheath.JPG (file) |  |
68 KB | G.C. Anzalone | 1 |
| 18:40, 14 June 2018 | AthenaII end effector attached.JPG (file) |  |
63 KB | G.C. Anzalone | 1 |
| 18:39, 14 June 2018 | AthenaII attach quickconnect.JPG (file) |  |
64 KB | G.C. Anzalone | 1 |
| 15:08, 13 June 2018 | AthenaII attach spool holder.JPG (file) |  |
84 KB | G.C. Anzalone | 1 |
