You do not have permission to edit this page, for the following reason:
You must confirm your email address before editing pages.
Please set and validate your email address through your user preferences.
To edit this page, please answer the question that appears below (more info):
The word 'Appropedia' comes from 'Appropriate' and...?
== Simple Hinges ==
Project developed by [[User:d4r3llo5|d4r3llo5]] ([[User talk:d4r3llo5|talk]])
# Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
# Picture of completed print using [[image:name-of-your-image.png|500px|right]]
== Bill of Materials==
# PLC Plastic 32 grams
# [[File:DoorFastener.stl|Top half of Hinge]]
# [[File:DoorHinge.stl|Bottom half of Hinge]]
== Tools needed for fabrication of the OSAT==
# [[Delta_Build_Overview:MOST| MOST Delta RepRap]] or similar RepRap 3-D printer
# PLC Plastic
# [https://www.menards.com/main/building-materials/drywall/screws/wood/c-8940.htm Mounting Screws]
== Technical Specifications and Assembly Instructions==
# Load the files in Openscad
#* Will have to edit these one at a time
# Change the parameters to what will suit your needs
#: hinge_scale: changes the size of your door hinge
#::(minimum accepted value is 1, creating a door hinge with dimensions 0.236" x 0.4409" or 6mm x 11.2mm)
#: screw_radius: radius for the screws for your door
#::ensure that the screw sizes are smaller than your hinge dimensions
#:door_pin: the pin radius for your connector (needs to be same for both files!)
#: door_width: the hinge width (recommended to be same for both files for efficient operations)
#: Compile and export as STL
# Open up Cura
#: In Cura load the STL model
#: Create as GCode
# Open Up RepetierHost
#: Load the GCode, print (est. 1 hour total)
=== Common Problems and Solutions===
* May want to consider not using exact spacing for the two hinges.
If the printer is not calibrated exactly, then the hinges will have a lot of friction, or may cause trailing and may not fit together properly.
* May want to consider adding to the two hinge parts a C style clamp option, if good screws are not possible to come by for the user.
This would allow them to simply require the seven bolts or pins to fasten the door to the hinge.
== Cost savings==
* If your solution is not a low cost one then it is not really appropriate.
# 1.05 = (15g + 18g) * (32.00/1000g)
# [http://www.homedepot.com/p/Crown-Bolt-4-in-Satin-Chrome-Adjustable-Spring-Door-Hinge-16123/202033830?N=5yc1vZc2ap 15.94 for commercial equivalent]
# Calculate $ savings and % savings
No external references were used in the making of this project.
[[Category:OSAT 3D-Printable Designs]]