Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.
Portal:Service learning/Selected page/23
An example of how these 3D printers can be used to meet these goals is the DremelFuge. The Dremelfuge is brilliant Open Source Hardware project developed by Cathal Garvey in Ireland. The DremelFuge is a printable rotor for centrifuging standard microcentrifuge tubes and miniprep columns. It is at least 10 times less expensive than a standard centrifuge and can be used by field workers in doing things like blood tests, but also by DYI biologists and educators. It requires industry standard 1.5ml/2ml Eppendorf/Microcentrifuge tubes.
- Used with a drill at 3000 RPM, the Dremelfuge will deliver over 400g, enough to comfortably spin down Miniprep samples (proven personally). It will likely achieve acceptable results at lower speeds, too.
- Used at 10krpm, on a Rotary tool for instance, a Dremelfuge should deliver over 4400g, more than enough to spin down bacterial cells.
- At 16krpm, Dremelfuge matches commercial centrifuges.
- On a Dremel 300, a maximum speed of 33krpm equates to a force of over 50,000 times earth's gravity, which puts it into so-called "Ultracentrifuge" territory. The latest version (as printed by Shapeways) has successfully spun tubes at this speed.