Size of this preview: 646 × 600 pixels. Other resolutions: 259 × 240 pixels | 517 × 480 pixels | 828 × 768 pixels | 1,103 × 1,024 pixels | 2,112 × 1,960 pixels.
Original file (2,112 × 1,960 pixels, file size: 241 KB, MIME type: image/jpeg)
Summary
| Description |
English: A schematic of the construction of an overhead door. Note that the 2 rails are completely seperate (the door wheels cannot move from rail 1 to rail 2). The upper wheels connect to the horizontal rails, and the lower ones connect to the vertical rails. Also not that in this design, the counterweight connects to 2 separate metal wires wich are each connected to the lower wheels (not the upper wheels). The schematic was made by simply analysing KVDP's current home garage door and drawing it over. |
| Date | |
| Source | Own work |
| Author | KVDP |
Licensing
|
I, the copyright holder of this work, release this work into the public domain. This applies worldwide. In some countries this may not be legally possible; if so: I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law. |
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 10:43, 22 March 2010 | | 2,112 × 1,960 (241 KB) | wikimediacommons>Genetics4good | {{Information |Description={{en|1=A schematic of the construction of an overhead door. Note that the 2 rails are completely seperate (the door wheels cannot move from rail 1 to rail 2). The upper wheels connect to the horizontal rails, and the lower ones |
File usage
The following page uses this file:
