L'energia incorporata , nota anche come energia incorporata, è definita come l' energia utilizzata nel lavoro di realizzazione di un prodotto. L'energia incorporata è un tentativo di misurare il totale di tutta l'energia necessaria per un intero ciclo di vita del prodotto . Questo ciclo di vita include l'estrazione delle materie prime, il trasporto, [1] la fabbricazione, l'assemblaggio, l'installazione, lo smontaggio, la decostruzione e/o la decomposizione.
Diverse metodologie producono diverse comprensioni della scala e dell'ambito di applicazione e del tipo di energia incorporata. Alcune metodologie sono interessate a rendere conto dell'energia incorporata in termini di petrolio che supporta i processi economici.
Indice
Standards
Il Code for Sustainable Homes del Regno Unito e il LEED USA Leadership in Energy and Environmental Design sono standard in cui l'energia incorporata in un prodotto o materiale viene valutata, insieme ad altri fattori, per valutare l' impatto ambientale di un edificio . L'energia incorporata è un nuovo concetto per il quale gli scienziati non hanno ancora concordato valori universali assoluti perché ci sono molte variabili da tenere in considerazione, ma la maggior parte concorda sul fatto che i prodotti possono essere confrontati tra loro per vedere quale ha più e quale ha meno energia incorporata. Gli elenchi comparativi (per un esempio, vedere l'Inventario dell'energia incorporata e del carbonio dell'Università di Bath di seguito) contengono valori assoluti medi e spiegano i fattori che sono stati presi in considerazione durante la compilazione degli elenchi.
Le tipiche unità di energia incorporate utilizzate sono MJ/kg (mega Joule di energia necessaria per produrre un chilogrammo di prodotto), tCO 2 (tonnellate di anidride carbonica creata dall'energia necessaria per produrre un chilogrammo di prodotto). La conversione di MJ in tCO 2 non è semplice perché diversi tipi di energia (petrolio, eolica, solare, nucleare e così via) emettono quantità diverse di anidride carbonica, quindi la quantità effettiva di anidride carbonica emessa quando viene realizzato un prodotto dipenderà dalla tipo di energia utilizzata nel processo di fabbricazione. Ad esempio, il governo australiano [2] fornisce una media globale di 0,098 tCO 2 = 1 GJ. Equivale a 1 MJ = 0,098 kgCO 2 = 98 gCO 2ovvero 1 kgCO 2 = 10,204 MJ.
Related methodologies
Negli anni 2000 le condizioni di siccità in Australia hanno generato interesse per l'applicazione dei metodi di analisi dell'energia incorporata all'acqua. Ciò ha portato all'uso del concetto di Acqua Incarnata .
Terminology
David M. Scienceman ha coniato il termine emergia come sinonimo generale di energia incarnata. [3]
Example
ENERGIA INCORPORATA | MJ/kg |
---|---|
Legno segato essiccato all'aria | 0.5 |
Terra stabilizzata | 0.7 |
Blocchi di cemento | 1.5 |
Embedded Carbon & Energy
Here is a link to one of the most complete to date documents on the embedded energy and carbon in materials, Inventory of (Embodied) Carbon & Energy (ICE).
See also
References
- ↑ Advances in free geographic mapping services can help reduce embodied energy of transportation in two ways. First. to choose a route that uses the least fuel and maintains vehicle velocities at their individual maximum fuel efficiency. Secondly, overlays can be used of determining: (i) raw material and products availability as a function of location, and (ii) modes of transportation as a function of emissions. These overlays enable manufacturers access to an easily navigable method to optimize the life cycle of their products by minimizing embodied energy of transportation. Pearce, J.M., Johnson, S.J., & Grant, G.B., 2007. "3D-Mapping Optimization of Embodied Energy of Transportation", Resources, Conservation and Recycling, 51 pp. 435–453. [1]
- ↑ http://web.archive.org/web/20081018053322/http://www.cmit.csiro.au:80/brochures/tech/embodied/ CSIRO on embodied energy: Australia's foremost scientific institution
- ↑ Odum 1996, Environmental Accounting: Energy and Environmental Decision Making, Wiley
Bibliography
- D.H. Clark, G.J. Treloar and R. Blair (2003) 'Estimating the increasing cost of commercial buildings in Australia due to greenhouse emissions trading, in J. Yang, P.S. Brandon and A.C. Sidwell, Proceedings of The CIB 2003 International Conference on Smart and Sustainable Built Environment, Brisbane, Australia.
- R. Costanza (1979) "Embodied Energy Basis for Economic-Ecologic Systems." PhD Dissertation. Gainesville, FL: Univ. of FL. 254 pp. (CFW-79-02)
- R.H. Crawford (2005) "Validation of the Use of Input-Output Data for Embodied Energy Analysis of the Australian Construction Industry", Journal of Construction Research, Vol. 6, No. 1, pp. 71-90.
- B. Hannon (1973) "The Structure of ecosystems", Journal of Theoretical Biology, 41, pp. 535-546.
- M. Lenzen (2001) "Errors in conventional and input-output-based life-cycle inventories", "Journal of Industrial Ecology", 4(4), pp. 127-148.
- M. Lenzen and G.J.Treloar (2002) 'Embodied energy in buildings: wood versus concrete-reply to Börjesson and Gustavsson, Energy Policy, Vol 30, pp. 249-244.
- W. Leontief (1966) Input-Output Economics, Oxford University Press, New York.
- J. Martinez-Alier (1990) Ecological Economics: Energy Environment and Society, Basil Blackwell Ltd, Oxford.
- P. Mirowski (1999) More Heat than Light: Economics as Social Physics, Physics as Nature's Economics, Historical Perspectives on Modern Economics, Cambridge University Press, Cambridge.
- H.T. Odum (1994) Ecological and General Systems: An Introduction to Systems Ecology, Colorado University Press, Boulder Colorado.
- D.M. Scienceman (1987) Energy and Emergy. In G. Pillet and T. Murota (eds), Environmental Economics: The Analysis of a Major Interface. Geneva: R. Leimgruber. pp. 257-276. (CFW-86-26)
- S.E. Tennenbaum (1988) Network Energy Expenditures for Subsystem Production, MS Thesis. Gainesville, FL: University of FL, 131 pp. (CFW-88-08)
- G.J. Treloar (1997) Extracting Embodied Energy Paths from Input-Output Tables: Towards an Input-Output-based Hybrid Energy Analysis Method, Economic Systems Research, Vol. 9, No. 4, pp. 375- 391.
- G.J. Treloar (1998) A comprehensive embodied energy analysis framework, Ph.D. thesis, Deakin University, Australia.
- G.J. Treloar, C. Owen and R. Fay (2001) 'Environmental assessment of rammed earth construction systems', Structural survey, Vol. 19, No. 2, pp. 99-105.
- G.J.Treloar, P.E.D.Love, G.D.Holt (2001) Using national input-output data for embodied energy analysis of individual residential buildings, Construction Management and Economics, Vol. 19, pp. 49-61.
- D.R.Weiner (2000) Models of Nature: Ecology, Conservation and Cultural Revolution in Soviet Russia, University of Pittsburgh Press, United States of America.
- G.P.Hammond and C.I.Jones (2006) Inventory of (Embodied) Carbon & Energy (ICE), Department of Mechanical Engineering, University of Bath, United Kingdom
External links
- Wikipedia:Embedded energy
- Research on embodied energy at the University of Sydney, Australia
- CSIRO on embodied energy: Australia's foremost scientific institution
- Australian Greenhouse Office, Department of the Environment and Heritage
- Ben Fusaro's Env. Math. Course
- University of Bath (UK) and Circular Ecology, Embodied Energy & Carbon Material Inventory