Bike rack

From Appropedia
Jump to navigation Jump to search
Edit the infobox
Bike rack
Description Rear Bike rack
Keywords bicycle, bike rack
Uses transportation, hobbyism
Authors Steven Helminen
Status Open design
Made? No
Replicated? Was this project made independently by someone other than the authors and without their guidance? No
Countries of design United States
Affiliations Category:MTU
Category:MOST
Materials Plastic
Sustainable Development Goals SDG09 Industry innovation and infrastructure
Documentation data
Language English
Manifest data
Language English
Updated 2020-06-04
Author Kathy Nativi
Author affiliation Appropedia
Author email info@appropedia.org

Rear Bike Rack[edit | edit source]

Project developed by [your name linked to your user account]


Abstract[edit | edit source]

  1. Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
  2. Picture of completed print using

Bill of Materials[edit | edit source]

  1. Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
    1. Upload and link to all source files
    2. Upload and link to all STLs

Tools needed for fabrication of the OSAT[edit | edit source]

  1. MOST Delta RepRap or similar RepRap 3-D printer

Skills and Knowledge Necessary to Make the OSAT[edit | edit source]

  • If you used special skill – link to relevant wikipedia or wikiversity articles/courses

Technical Specifications and Assembly Instructions[edit | edit source]

  1. Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
  2. Include print time estimate
  3. Include assembly time estimate
  4. Including drawings or pictures of the device at stage of assembly at minimum. (https://www.appropedia.org/Special:Upload)
  5. Consider video if appropriate
Example video summary of textbook

Common Problems and Solutions[edit | edit source]

  • Include common mistakes/problems to avoid in building your OSAT and how to overcome them

Cost savings[edit | edit source]

  • If your solution is not a low cost one then it is not really appropriate.
  1. Estimate your costs
  2. Find a commercial equivalent
  3. Calculate $ savings and % savings

References[edit | edit source]

  • The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <ref> </ref> and <references/> tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: [1]
  1. web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html

Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in [[Category:How tos]] [[Category:Electricity]] [[Category:Electric lighting]].