Utilizing Strong Oxidisers (MY4777/MY5777 2016)[edit | edit source]

JLaureto (talk) 07:29, 1 December 2016 (PST) Krcipriano (talk) 07:30, 1 December 2016 (PST)

  1. Controlled atmosphere to promote deposited layer growth JLaureto (talk) 07:37, 1 December 2016 (PST)
  2. Increased temperature increases oxidation rate. Assuming the environment was oxygen rich to begin with JLaureto (talk) 07:38, 1 December 2016 (PST)
  3. Oxygen is readily available. Any material, mostly metallic some polymer, could by applied to the printing system.JLaureto (talk) 07:42, 1 December 2016 (PST)
  4. Potentially eliminate bolts and "oxidize" parts together?JLaureto (talk) 07:42, 1 December 2016 (PST)
  5. Similar to above reducing fixturing hardware would reduce overall costJLaureto (talk) 07:42, 1 December 2016 (PST)
  6. Something??
  7. Promote oxidation of build plate to a uniform surfaceJLaureto (talk) 07:46, 1 December 2016 (PST)
  8. Temporarily fixture components together and introduce driving for for oxidation to bond everything together. JLaureto (talk) 07:46, 1 December 2016 (PST)

  1. use oxidizer to clean hot end Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  2. auto clean hotend with oxidizer agent Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  3. use oxidizing agent to clean bed surface Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  4. print untop of oxidizing agent to allow for print removal from surface Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  5. rust print Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  6. oxidize print afterwards to change color Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  7. oxidize atmosphere around print to prevent contaminants Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  8. use an oxidizing agent in print to enable 4D Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  9. partially print oxidizing agent into print to make folding, long time delay 4D print Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  10. use oxidizing agent inside filament to start degradation to speed recycling or biodegradationJoshua Pearce (talk) 07:08, 4 December 2018 (PST)
  11. use oxidizing agent in nutritional 3D printed capsule for time delay of nutrients Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  12. use oxidizing agent in poison 3D printed capsule for time delay of poison Joshua Pearce (talk) 07:08, 4 December 2018 (PST)
  13. use oxidizing agent coupled to metal as inclusion to change mech properties over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  14. use oxidizing agent coupled to metal as inclusion to change shape over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  15. use oxidizing agent coupled to metal as inclusion to change light absorption over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  16. use oxidizing agent coupled to metal as inclusion to change magnetic properties over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  17. use oxidizing agent coupled to metal as inclusion to make data erase over time Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  18. physical snapchat Joshua Pearce (talk) 07:10, 4 December 2018 (PST)
  19. use oxidizing agent on surface printed in thin film of metal to have zero effort bed removal of print Joshua Pearce (talk) 07:11, 4 December 2018 (PST)
  20. use oxidizing agent on surface of print to change color of print Joshua Pearce (talk) 07:11, 4 December 2018 (PST)
  21. use oxidizing agent on surface of part to help as digging tool Joshua Pearce (talk) 07:12, 4 December 2018 (PST)
  22. use oxidizing agent on surface of part to help as cutting tool Joshua Pearce (talk) 07:12, 4 December 2018 (PST)
  23. use oxidizing agent on surface of part to help as art tool - drawing object Joshua Pearce (talk) 07:12, 4 December 2018 (PST)
  24. 2 filament printing one with oxidizing agent to be used a support Joshua Pearce (talk) 07:12, 4 December 2018 (PST)
  25. 3 filament printing one with oxidizing agent to be used a support and the other to use to increase flexibility Joshua Pearce (talk) 07:13, 4 December 2018 (PST)
FA info icon.svg Angle down icon.svg Page data
Authors John J. Laureto
License CC-BY-SA-3.0
Language English (en)
Related 0 subpages, 1 pages link here
Impact 31 page views (more)
Created December 1, 2016 by John J. Laureto
Last modified February 6, 2023 by Felipe Schenone
Cookies help us deliver our services. By using our services, you agree to our use of cookies.