- Printable sheet that serves as tear off print bed.Caaukee (talk) 07:36, 1 December 2016 (PST)
- Thin shell around printer that allows it to be operated outside.Caaukee (talk) 07:36, 1 December 2016 (PST)
- Portable liquid containers. Caaukee (talk) 07:36, 1 December 2016 (PST)
- Cover for Melzi Caaukee (talk) 07:36, 1 December 2016 (PST)
- Stick on Graphics for deltabot.Caaukee (talk) 07:36, 1 December 2016 (PST)
- Gaskets. Caaukee (talk) 07:36, 1 December 2016 (PST)
- Artificial temporary skin for field hospitalsCaaukee (talk) 07:36, 1 December 2016 (PST)
- Chemical etching templatesCaaukee (talk) 07:36, 1 December 2016 (PST)
- Tint for lenses.Caaukee (talk) 07:36, 1 December 2016 (PST)
- Waterproofing electronics. Caaukee (talk) 07:36, 1 December 2016 (PST)
- Mini-drone body panels Caaukee (talk) 07:36, 1 December 2016 (PST)
- Dental veneers Caaukee (talk) 07:36, 1 December 2016 (PST)
- Heat retention for lower energy used by heated bed Caaukee (talk) 07:42, 1 December 2016 (PST)
- Template for photo processes. Caaukee (talk) 07:42, 1 December 2016 (PST)
- Stock for fine filterCaaukee (talk) 07:42, 1 December 2016 (PST)
- UV protectionCaaukee (talk) 07:42, 1 December 2016 (PST)
- Thin fins on hot end to dissipate heat faster and allow for faster print. Caaukee (talk) 07:50, 1 December 2016 (PST)
- Extruder body made of composite matrix film Caaukee (talk) 07:50, 1 December 2016 (PST)
- Using the 3D printed layer as the base to print the object on. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Printing 3D printed shell tube as a routing cable for the filament. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Printing 3D printed shell tube as a routing cable for the limit switch wires. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Printing 3D printed shell tube as a routing cable for the electrical cables connecting Melzi board and motors. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Printing 3D printed pulley cables which moves the guideways on X,Y,Z vertical rods. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Print cables which connect the guideways and the printing head of the printer which will prevent the snapping of connecting rods from the magnets on print head. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Printing 3D printed flexible Zip-ties which can replace the rubber zip ties. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Printing a 3D printed sheet which can be wrapped around the filament roll in order to prevent the dust sticking to the filament. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Printing four 3D printed sheets to cover the printer from all sides in order to keep it isolated. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Printing 3D printed sheets which can be used to cover all the electrical connections underneath the printer. Salils.1807 (talk) 14:17, 4 December 2018 (PST)
- Cut out films of plastic using something like a vinyl cutter to lay an entire layer at a time. Brhubbar (talk) 15:18, 3 December 2019 (UTC)
- Use plastic films similar to heat shrink to improve surface quality post print. Brhubbar (talk) 15:18, 3 December 2019 (UTC)
- Use thermosetting films to generate casting molds from a 3D printed part. Brhubbar (talk) 15:35, 3 December 2019 (UTC)
- Make the bed plate touch sensitive to allow fast or on the fly calibration. Brhubbar (talk) 15:35, 3 December 2019 (UTC)
- Use a flexible bed plate to account for improper leveling. Brhubbar (talk) 15:35, 3 December 2019 (UTC)
- 3D print cell walls. Brhubbar (talk) 15:35, 3 December 2019 (UTC)
- Print shells to form molds for foam to use in investment casting. Brhubbar (talk) 15:35, 3 December 2019 (UTC)