• Please complete the task and either 1) hyperlink to the page in our Appropedia space or 2) email Dr. Pearce and cross off the result
  • Update task list every Wednesday by midnight.

Allie[edit | edit source]

  • project writing

Bas[edit | edit source]

  • Take home exam MY5400: this will take all my time until Friday.

ASAP

  • Software/firmware metal printer improve
  • HDPE prints experiments
  • ---

Near term

  • linear actuator:MOST
    • linear actuator stage w/game control - microscope -Science
  • Document the new design of the recyclebot and its operation-- main page Recyclebot - new designs here Recyclebot v3.0, put images, detailed instructions for build and operate.
  • Background research on PETE -- its melting point is a lot hotter than what we have worked with - will be a challenge
  • custom reprap with high T extruder
  • print awesome parts
  • print mech tests components
  • PLA fractions experiment
  • print weak elec. material
  • large bot build/bed level/automate
  • resurrect trinity
  • ---
  • animation, Blender animation protocol:MOST
  • pva recycling
  • dual filament extrusion page
  • 3d scanner
  • resistor wire printing in objects

Ben[edit | edit source]

Chenlong[edit | edit source]

Near term

* new glass etch - print Dr. Frost - verify - make sure it works on our own for PLA on normal glass

- The best recipe we have is:
- 1. clean slide with ethanol (200 proof is what we used)
- 2. soak in neat [3-92-aminoethylamino)propyl]trimethoxysilane for 15 min.
- 3. rinse with toluene
- 4. let dry under ambient conditions over night

* ALD lit search Atomic layer deposition literature review

  • spectrometer Open source spectrometer:MOST

* finish InGaN lit review InGaN material characterization literature review

Emily[edit | edit source]

Near term - recyclebot

  • commission both filawinders
  • commission all 3 commercial recyclebots
  • read their spec sheets - if they can in theory do PET try it.
  • test PET in all bots with filawinder
  • when everything is good make good quality filament - while recording energy use and time for lca studies
  • ---

Near term- microscope stage

  • finish on Automated microscope stage literature review - fill in spec sheet comparison chart with costs and do a lit. search on the instrumentation -- look for things like applications, etc.
  • Talk to Jerry about building it and doing test comparison with his
  • Create Spec sheet for the line of MOST OS automated microscope stage
  • ----

Medium term

  • commission new recyclebot with Bas
  • test print with trinity with PET
  • when confident - we will do demo prints of OSAT
  • print dogbones for mech tests
  • do quick PET 3dp lit review

Medium - long term

  • lit review PET+ conductivity
  • order conductors
  • make composite filament
  • test composite filament
  • talk to Dr. King
  • print and test composite

Jerry[edit | edit source]

ASAP

  • schedule/meet with Pat - see what is next
  • review stuff here - particularly build instructions and improve Open-source metal 3-D printer
  • order parts and make all metal MOST delta stage
  • ---

Near term

  • collect data on delta 4 printing energy use for example product - I will send full list with paper outline
  • design and build table clamp for Nature stage
  • Nature -- develop protocols as a OS 3-D scientific platform: shaker, orbital shaker, mini shake table, particle size sorter, chem reactions, auto pippetter - work with Bas and Chenlong
  • write but dont post conversion of MOST delta to stage
    • write up BOM, instructions MOST delta stage
  • work with Bas to get fluid handling down by coupling syringe with stage
  • ---

Ideas for later

    • talk to silabond see if they have anything useful
    • Methods paper on evaluating 3D printer materials - Nature/ Nature Materials
    • antigravity printing - space fabrication - top space journal?
    • zero waste laser/LED curing - Journal of cleaner production - can also take LCA route with David S.
    • surface finish printing - need killer app for this - then target the app
    • orthotics - with scanner - medical journal w. Mark
    • Effect of environment on print quality with exotic media
    • Silabond experiments
  • linear actuator stage w/game control - microscope -Science
  • Printing for Paul
    • methods paper on distributed casting - RepRap Journal
    • metal printer/ metal parts for it and Ga printing [1] or this [2]
  • inkject conductivity --Sci/Nature
  • pushme pullyou servo
  • glass fiber, sugar
  • WQI
  • work with portage
  • metal welder printer
  • possible PV characterization with Barbara

Joseph[edit | edit source]

near term

  • open source charge controller
  • fix and test solar powered reprap
  • source IV tracer parts - get me shopping list
  • finish InGaN lit review - focus on devices --InGaN photovoltaics literature review
  • write up Hall Effect protocol:MOST, post spreadsheet Dr. Moran

Jephias[edit | edit source]

ASAP

  • 4 Point Probe:MOST
    • on the page put in the background material what is a 4 point probe, what does it do, how good does it have to be for our application
    • make a table of existing 4 point probes, costs, sources, specs -- use Emily's work on the syringe pump as an example
  • ---

Near term

  • help Bas build 4 point probe
  • T up every experimental apparatus and write protocol for experiments when Ankit is done with simulations write appropedia "how to" pages for the following
    • Finish silver dep tests/protocol
    • start ITO tests/protocol
    • start litho tests/protocol
    • fix FIB protocol
  • Do it.

Nick[edit | edit source]

  • ---
  • finish filter changer case
  • nip/pin flip stage
  • solar cell probe

Ravi[edit | edit source]

  • construct welder
  • fill in method Oscilloscope protocol: MOST
  • welding simulation paper outline asap
  • revise thermal paper
  • ---
  • forestry data logger
  • Forest service PV system design-- appropedia summary page so others can copy - BOM, wiring, how to access data etc.
  • ---

Publications

Dr. Pearce[edit | edit source]

(W= waiting on reply) (add to bottom of list before waiting/triggers)

  • ---

Meeting times Thurs[edit | edit source]

  1. ACQ4: an open-source software platform for data acquisition and analysis in neurophysiology research.

Campagnola L, Kratz MB, Manis PB. Front Neuroinform; 2014;8:3.

  1. tranSMART: An Open Source and Community-Driven Informatics and Data Sharing Platform for Clinical and Translational Research.

Athey BD, Braxenthaler M, Haas M, Guo Y. AMIA Jt Summits Transl Sci Proc; 2013;2013:6-8.

  1. Open Research Networking Gadgets (ORNG).

Meeks E, Turner B, Chatterjee A, Yuan L. AMIA Jt Summits Transl Sci Proc; 2013;2013:175.

Tesla -

PV farm IS

Deadlines[edit | edit source]

grants

To do

Pending Projects[edit | edit source]

open design[edit | edit source]

spectral pv[edit | edit source]

Open source hardware projects[edit | edit source]

pla %s[edit | edit source]

  • Look up properties of the PLA for all bags and post here with references PLA for 3-D printing:MOST
  • Mass a collection of 10 mech test strips let me know the value
  • Make 10 samples of filament of ~0.5kg each from 1 to 100% c-PLA
  • Learn 3D printing from Ben
  • Make 10 samples for each filament fraction mech test strips
  • Learn mech testing from Bas
  • Pull the 100 samples
  • Make one pretty graph - submit for prize

lasersaur[edit | edit source]

FA info icon.svg Angle down icon.svg Page data
Authors Megan Kreiger, Brennan Tymrak, Mac Brennan
License CC-BY-SA-3.0
Language English (en)
Related 0 subpages, 7 pages link here
Impact 117 page views (more)
Created August 25, 2011 by Ankit Vora
Last modified March 1, 2024 by StandardWikitext bot
Cookies help us deliver our services. By using our services, you agree to our use of cookies.