mNo edit summary
(9 intermediate revisions by the same user not shown)
Line 10: Line 10:
|-
|-
|Hi. I am cross appointed as an Associate Professor in the [http://www.mse.mtu.edu Materials Science & Engineering] and the [http://www.mtu.edu/ece/ Electrical & Computer Engineering] at [http://www.mtu.edu/ Michigan Tech]. I currently run the [[MOST|Michigan Tech in Open Sustainability Technology (MOST)''' group]]. I am also an affiliated faculty member in the [http://www.mtu.edu/gradschool/programs/degrees/environmental-energy/ graduate program  in Environmental and Energy Policy at MTU] and an adjunct professor in Mech and at Queens University, Canada where I run the [[:Category:Queens Applied Sustainability Group|Queens Applied Sustainability Group]]. Please feel free to drop me a [http://www.appropedia.org/User_talk:J.M.Pearce line]
|Hi. I am cross appointed as an Associate Professor in the [http://www.mse.mtu.edu Materials Science & Engineering] and the [http://www.mtu.edu/ece/ Electrical & Computer Engineering] at [http://www.mtu.edu/ Michigan Tech]. I currently run the [[MOST|Michigan Tech in Open Sustainability Technology (MOST)''' group]]. I am also an affiliated faculty member in the [http://www.mtu.edu/gradschool/programs/degrees/environmental-energy/ graduate program  in Environmental and Energy Policy at MTU] and an adjunct professor in Mech and at Queens University, Canada where I run the [[:Category:Queens Applied Sustainability Group|Queens Applied Sustainability Group]]. Please feel free to drop me a [http://www.appropedia.org/User_talk:J.M.Pearce line]
Webpages: [http://me.queensu.ca/people/pearce/ Queen's faculty page],  [http://www.linkedin.com/in/jmpearce LinkedIn], [https://qspace.library.queensu.ca/handle/1974/5287 QSpace], [http://www.thingiverse.com/jpearce Thingiverse], [https://www.youmagine.com/users/jpearce Youmagine], [https://www.engineeringforchange.org/user/viewMember/334 E4C], [http://www.scribd.com/jmpearce Scribd], [http://reprap.org/wiki/User:J.M.Pearce RepRap wiki], [http://www.researcherid.com/rid/D-2052-2010 Research ID], [http://www.shareable.net/users/pearce shareable], [http://ssrn.com/author=1791404 SSRN], [http://p2pfoundation.net/User:J.M.Pearce P2P Foundation], [http://mtu.academia.edu/JoshuaPearce Academic.edu], [http://scholar.google.com/citations?user=QZ8lPxwAAAAJ Google Scholar],[http://www.researchgate.net/profile/Joshua_Pearce/ Research gate], [http://80000hours.org/members/joshua 80000hrs], [http://community.frontiersin.org/people/JoshuaPearce/105601 Frontiers], [http://loop.frontiersin.org/people/105601/overview Loop], [http://orcid.org/0000-0001-9802-3056 Orcid], [https://www.amazon.com/author/joshuapearce Amazon], [https://store.elsevier.com/authorDetails.jsp?authorId=ELS_1132536&locale=en_US Elsevier], [https://www.amazon.com/author/jpearce Amazon author's page], [https://libre3d.com/other/194/seller.html Libre3D], [http://opensource.com/users/jmpearce Opensource], [https://twitter.com/ProfPearce Twitter @ProfPearce], [http://www.scienceofsciencepolicy.net/users/pearce47155 Science of Science Policy], [https://osf.io/6psy8/ Open Science Framework], [http://works.bepress.com/jmpearce Bepress Selected Works]
Webpages: [http://me.queensu.ca/people/pearce/ Queen's faculty page],  [http://www.linkedin.com/in/jmpearce LinkedIn], [https://twitter.com/ProfPearce Twitter @ProfPearce], [http://orcid.org/0000-0001-9802-3056 Orcid],


----
----
For me: [[MOST tasks]], [http://www.appropedia.org/Special%3APrefixindex&from=J.M.Pearce&namespace=2 Userspace], [[User:J.M.Pearce/TTD|Things to do]], [[:Category:MOST|MOST]] [http://pequals.com/apprount/?titles=category%3AMOST&depth=full Appropedia pageview counter run for MOST], [http://www.appropedia.org/Special:Nuke mass delete], [http://goo.gl/khgiU7 MTU UG research opp post]
'''Open access/blogs:''' [http://mtu.academia.edu/JoshuaPearce Academic.edu], [http://scholar.google.com/citations?user=QZ8lPxwAAAAJ Google Scholar],[http://www.researchgate.net/profile/Joshua_Pearce/ Research gate],  [http://www.researcherid.com/rid/D-2052-2010 Research ID], [http://ssrn.com/author=1791404 SSRN], [https://qspace.library.queensu.ca/handle/1974/5287 QSpace], [http://www.scribd.com/jmpearce Scribd],  [http://p2pfoundation.net/User:J.M.Pearce P2P Foundation], [http://80000hours.org/members/joshua 80000hrs], [http://community.frontiersin.org/people/JoshuaPearce/105601 Frontiers], [http://loop.frontiersin.org/people/105601/overview Loop],  [https://www.amazon.com/author/joshuapearce Amazon], [https://store.elsevier.com/authorDetails.jsp?authorId=ELS_1132536&locale=en_US Elsevier], [https://www.amazon.com/author/jpearce Amazon author's page],  [http://opensource.com/users/jmpearce Opensource],  [http://www.scienceofsciencepolicy.net/users/pearce47155 Science of Science Policy], [http://works.bepress.com/jmpearce Bepress Selected Works], [https://ultimaker.com/user/pearce Ultimaker]
----
'''Hardware/Software sharing:''' [https://osf.io/6psy8/ Open Science Framework], [https://github.com/mtu-most Github], [https://www.youmagine.com/users/jpearce Youmagine], [http://www.thingiverse.com/jpearce Thingiverse], [https://makershare.com/portfolio/joshua-pearce Makershare], [http://www.homemadetools.net/forum/members/most/ Homemade Tools], [https://www.hwtrek.com/profile/most-group.14023 HWTrek], [https://www.hackster.io/MOST Hackster.io], [https://hackaday.io/MOST Hackaday.io], [https://libre3d.com/other/194/seller.html Libre3D], [http://reprap.org/wiki/User:J.M.Pearce RepRap wiki],  [https://snapguide.com/most-group/ Snapguide], [https://www.engineeringforchange.org/user/viewMember/334 E4C]
 
 
----
'''For me:''' [[MOST tasks]], [http://www.appropedia.org/Special%3APrefixindex&from=J.M.Pearce&namespace=2 Userspace], [[User:J.M.Pearce/TTD|Things to do]], [[:Category:MOST|MOST]] [http://pequals.com/apprount/?titles=category%3AMOST&depth=full Appropedia pageview counter run for MOST], [http://www.appropedia.org/Special:Nuke mass delete], [http://goo.gl/khgiU7 MTU UG research opp post],
|}
|}


Line 21: Line 27:
{{Pearce-pubs}}
{{Pearce-pubs}}
=Biography=
=Biography=
Joshua M. Pearce received his Ph.D. in Materials Engineering from the Pennsylvania State University. He then developed the first Sustainability program in the Pennsylvania State System of Higher Education and helped develop the Applied Sustainability graduate engineering program while at Queen's University, Canada. He currently is an Associate Professor cross-appointed in the Department of Materials Science & Engineering and in the Department of Electrical & Computer Engineering at the Michigan Technological University where he runs the [[MOST|Open Sustainability Technology Research Group]]. His research concentrates on the use of [[open source appropriate technology]] to find collaborative solutions to problems in sustainability and poverty reduction. His research spans areas of electronic device physics and materials engineering of solar photovoltaic cells, and RepRap 3-D printing, but also includes applied sustainability and energy policy. His research is regularly covered by the international and national press and it is continually ranked in the top 0.1% on Academia.edu. He is the editor-in-chief of ''[[HardwareX]]'', a journal dedicated to open source scientific hardware and his is the author of the ''[[Open-Source Lab:How to Build Your Own Hardware and Reduce Research Costs]]''.
Joshua M. Pearce received his Ph.D. in Materials Engineering from the Pennsylvania State University. He then developed the first Sustainability program in the Pennsylvania State System of Higher Education and helped develop the Applied Sustainability graduate engineering program while at Queen's University, Canada. He currently is a Professor cross-appointed in the Department of Materials Science & Engineering and in the Department of Electrical & Computer Engineering at the Michigan Technological University where he runs the [[MOST|Open Sustainability Technology Research Group]]. His research concentrates on the use of [[open source appropriate technology]] to find collaborative solutions to problems in sustainability and poverty reduction. His research spans areas of electronic device physics and materials engineering of solar photovoltaic cells, and RepRap 3-D printing, but also includes applied sustainability and energy policy. His research is regularly covered by the international and national press and it is continually ranked in the top 0.1% on Academia.edu. He is the editor-in-chief of ''[[HardwareX]]'', a journal dedicated to open source scientific hardware and the author of the ''[[Open-Source Lab:How to Build Your Own Hardware and Reduce Research Costs]]''.


Current teaching:
Current teaching:
* [[L3999|ELEC-L3999: 3D Printing of Open Source Hardware for Science]]
* [[MY4777]]/MY5777/EE4777/EE5777 Open-source 3-D printing
* [[MY4777]]/MY5777/EE4777/EE5777 Open-source 3-D printing
* [[MY5490]]/[[EE5490]] - Solar Photovoltaic Science and Engineering
* [[MY5490]]/[[EE5490]] - Solar Photovoltaic Science and Engineering
Line 39: Line 46:


== Photovoltaic Materials and Electronic Device Physics of Solar Cells: ==
== Photovoltaic Materials and Electronic Device Physics of Solar Cells: ==
[[image:GELP_Logo.jpg|left|thumb|[http://globalenergyleaders.podbean.com/e/episode-12-solar-energy/ Global Energy Leaders Podcast on Solar Energy]]]
[[Photovoltaic]] electrical production is a technologically feasible, economically viable, environmentally benign, sustainable, and socially equitable solution to society’s future energy requirements. If anyone is still concerned about the energy payback of solar cells please read [http://www.cede.psu.edu/users/alau/ASES02_Net_Energy_PV.pdf this]. There is currently a big debate in the photovoltaic industry on how to get low cost solar electricity. Is it better to go with high efficiencies and pay more up front -- or really push the costs down with junk materials and accept an efficiency penalty.  I don't know which way is better so I do research on both approaches.
[[Photovoltaic]] electrical production is a technologically feasible, economically viable, environmentally benign, sustainable, and socially equitable solution to society’s future energy requirements. If anyone is still concerned about the energy payback of solar cells please read [http://www.cede.psu.edu/users/alau/ASES02_Net_Energy_PV.pdf this]. There is currently a big debate in the photovoltaic industry on how to get low cost solar electricity. Is it better to go with high efficiencies and pay more up front -- or really push the costs down with junk materials and accept an efficiency penalty.  I don't know which way is better so I do research on both approaches.


Line 113: Line 121:




[[Category:5970-2017]]
[[Category:5490-2017]]
[[Category:Queens Applied Sustainability Group]]
[[Category:Queens Applied Sustainability Group]]
[[Category:APSC100 Solar Powered XO]]
[[Category:APSC100 Solar Powered XO]]

Revision as of 06:18, 3 September 2017

Open-source Lab
Feeding Everyone No Matter What
HardwareX
Prof. Joshua M. Pearce
Jmp.JPG
Hi. I am cross appointed as an Associate Professor in the Materials Science & Engineering and the Electrical & Computer Engineering at Michigan Tech. I currently run the Michigan Tech in Open Sustainability Technology (MOST) group. I am also an affiliated faculty member in the graduate program in Environmental and Energy Policy at MTU and an adjunct professor in Mech and at Queens University, Canada where I run the Queens Applied Sustainability Group. Please feel free to drop me a line

Webpages: Queen's faculty page, LinkedIn, Twitter @ProfPearce, Orcid,


Open access/blogs: Academic.edu, Google Scholar,Research gate, Research ID, SSRN, QSpace, Scribd, P2P Foundation, 80000hrs, Frontiers, Loop, Amazon, Elsevier, Amazon author's page, Opensource, Science of Science Policy, Bepress Selected Works, Ultimaker


Hardware/Software sharing: Open Science Framework, Github, Youmagine, Thingiverse, Makershare, Homemade Tools, HWTrek, Hackster.io, Hackaday.io, Libre3D, RepRap wiki, Snapguide, E4C



For me: MOST tasks, Userspace, Things to do, MOST Appropedia pageview counter run for MOST, mass delete, MTU UG research opp post,



Biography

Joshua M. Pearce received his Ph.D. in Materials Engineering from the Pennsylvania State University. He then developed the first Sustainability program in the Pennsylvania State System of Higher Education and helped develop the Applied Sustainability graduate engineering program while at Queen's University, Canada. He currently is a Professor cross-appointed in the Department of Materials Science & Engineering and in the Department of Electrical & Computer Engineering at the Michigan Technological University where he runs the Open Sustainability Technology Research Group. His research concentrates on the use of open source appropriate technology to find collaborative solutions to problems in sustainability and poverty reduction. His research spans areas of electronic device physics and materials engineering of solar photovoltaic cells, and RepRap 3-D printing, but also includes applied sustainability and energy policy. His research is regularly covered by the international and national press and it is continually ranked in the top 0.1% on Academia.edu. He is the editor-in-chief of HardwareX, a journal dedicated to open source scientific hardware and the author of the Open-Source Lab:How to Build Your Own Hardware and Reduce Research Costs.

Current teaching:

Research Interests

Template:Userboxtop Template:User MOST Template:User photovoltaic Template:User OSH Template:User 3D printing Template:Userboxbottom

Advisor for the Michigan Tech Open Source Hardware Enterprise

My research focuses on open and applied sustainability, which is the application of science and innovation to ensure a better quality of life for all, now and into the future, in a just and equitable manner, whilst living within the limits of supporting ecosystems. Specifically I am interested in exploring the way solar energy can be used to provide clean sustainable electricity through photovoltaic devices and how the sharing of open source hardware and software can create sustainable and equitable means of production (e.g. create open source appropriate technology and other free and open source hardware).

Photovoltaic Materials and Electronic Device Physics of Solar Cells:

Global Energy Leaders Podcast on Solar Energy

Photovoltaic electrical production is a technologically feasible, economically viable, environmentally benign, sustainable, and socially equitable solution to society’s future energy requirements. If anyone is still concerned about the energy payback of solar cells please read this. There is currently a big debate in the photovoltaic industry on how to get low cost solar electricity. Is it better to go with high efficiencies and pay more up front -- or really push the costs down with junk materials and accept an efficiency penalty. I don't know which way is better so I do research on both approaches.

Solar installations have grown by more than 600% across both residential and commercial properties in the past 9 years – a compound industry growth rate of 76% [1].

Indium gallium nitride - ultra high efficiency moderate cost

  • This research intends to radically reduce the costs of photovoltaic devices by developing an ultra-high efficiency indium gallium nitride (InGaN) solar cell. The primary reason InGaN shows such incredible promise as a photovoltaic material is the ability to modify its band gap by adjusting the ratio of indium and gallium in the film. A multi-layered cell of InGaN can be made with band gaps ranging from 0.7eV (InN) to 3.4eV (GaN) which covers the entire range of the solar spectrum. See some of our latest work here: S. Keating, M.G. Urquhart, D.V.P. McLaughlin and J.M. Pearce, “Effects of Substrate Temperature on Indium Gallium Nitride Nanocolumn Crystal Growth”, Crystal Growth & Design, 11 (2), pp 565–568, 2011. open access

Amorphous silicon - moderate efficiency but low cost

  • Amorphous silicon PVT - Hydrogenated amorphous silicon (a-Si:H) based solar cells are the least expensive at a given production level and posses an excellent ecological balance sheet. The ecological and economic promise of a-Si:H solar cells is currently incomplete because of the light induced degradation of its electronic properties known as the Staebler-Wronski Effect (SWE). Numerous theories have been proposed to explain SWE, and my work has focused on the analysis of experimental evidence for a complex SWE mechanism - with an eye on controlling and eliminating the problem. Recent publications on the technical aspects of a-Si:H solar cells.

Current Projects in Applied Sustainability and Green Engineering

Solar Photovoltaic Systems Engineering

Open Source Appropriate Technology and Sustainable development

Completed projects and publications

Michigan Tech

Category:MOST completed projects and publications/Gallery2017 Category:MOST completed projects and publications/Gallery2016 Category:MOST completed projects and publications/Gallery2015 Category:MOST completed projects and publications/Gallery2014 Category:MOST completed projects and publications/Gallery2013 Category:MOST completed projects and publications/Gallery2012

Teaching

Template:Userboxtop Template:User Service Learning Template:Userboxbottom I am also a strong proponent for service learning in engineering and making change. Utilizing appropriate technology projects to motivate students to learn physics. Also using service learning and commissioned assignments to solve real world environmental problems. Why students should come to MTU [2]

Courses with a service learning component

I have used Appropedia to support the following courses:

  • APSC100 - Engineering - First Year Project course
  • MECH370 - Materials Processing
  • Mech425 - Engineering for Sustainable Development
  • MECH820 - Solar Photovoltaic Materials, Cells and Systems Engineering
  • MECH836 - Applied Sustainability and CMAS801
  • MY3701 - Introduction to Semiconductor Materials Science and Engineering
  • MY4777/MY5777/EE4777/EE5777 Open-source 3-D printing
  • MY5970 - Solar Hacking
  • MY5490/EE5490 - Solar Photovoltaic Science and Engineering
  • PH261 - Physics of Energy and the Environment
  • PH254 - Introduction to Nanotechnology

Resources for Educating Children

The International Journal for Service Learning

I am the manuscript editor for the IJSLE. The International Journal for Service Learning in Engineering (IJSLE) is a peer-reviewed electronic journal offered free, semi-annually, over the World Wide Web. The Journal welcomes manuscripts based on original work of students and researchers with a specific focus or implication for service learning in engineering, engineering entrepreneurship in service, or related service learning pedagogy.

With an increasing number of individuals and institutions of higher education becoming involved in service learning and entrepreneurship in service learning, the IJSLE is an invaluable resources for students, faculty, practicing engineers and local communities. With articles relating to the latest design and research pertinent to local communities, the faculty-reviewed articles in each issue provide the reader with timely information related to:

   * Engineering Design Projects as Service
   * Engineering Research Projects as Service
   * Engineering-Related Entrepreneurial Projects as Service
   * Pedagogy in Engineering-Related Service Learning

If you are contributing to Appropedia - you should seriously consider submitting a manuscript once your project has come together

Cookies help us deliver our services. By using our services, you agree to our use of cookies.