Instruction Improvements[edit source]
- calibration instructions
- adjusting limit switches
- washer reminder
- bolt tight for motors
- square bit too small (tolerance/size issue)
- bolt stencil -- or redesign to use all the same
- reminder to download the firmware -- needs to be at place just not front
- screwdriver slightly too big for board adjustments
- fix handle tolerance or put in set screw
- add spacula scraper
- glue to kit
- handle for allen wrench
- details for IDE version
- end effector tolerances for magnets
- mac instructions need improved
- consider moving away from repetier host
- color order for wires so can do instructions b/W
- missing 2 shorter screws (part list has 2 instruction 4)
More Videos[edit source]
- calibration of bed
Delta Improvements[edit source]
- auto bed leveling
- more flexibility on board - back to arduino ramps or similar
- declogging method
- sensing filament fail to kill job
- auto pause for errors
- improve Bowden cable
- less parts that need deformed for screw
- less parts
- faster build time
- better way to mount fan
- less screw sizes
- robust power supply
- locking washers
- on/off switch
- tool drawer
- higher resolution printed parts
- lower costs
Most frustrating[edit source]
- software 5
- tools size 11
- calibration 14
Need access to makerspace