Line 58: Line 58:
* [http://www.daviddarling.info/encyclopedia/A/AE_anaerobic_digestion.html]-[[Anaerobic Digestion]]
* [http://www.daviddarling.info/encyclopedia/A/AE_anaerobic_digestion.html]-[[Anaerobic Digestion]]
* [http://www.websters-online-dictionary.org/BO/BOD5.html]-Websters definition of BOD
* [http://www.websters-online-dictionary.org/BO/BOD5.html]-Websters definition of BOD
* [http://www.wte-ltd.co.uk/non_electric_wastewater_systems.html]- [Non-Electric Sewage Treatment Plants]
* [http://www.wte-ltd.co.uk/non_electric_wastewater_systems.html] - Non-Electric Sewage Treatment Plants


=References=
=References=
<references/>
<references/>
[[Category:Wastewater]]
[[Category:Wastewater]]

Revision as of 12:05, 3 November 2011

Introduction

Wastewater treatment is critical in maintaining the quality of receiving water bodies. Wastewater exits residential, business, and industry buildings via drains; this includes water from toilets, washer machines, dish washers, showers, and baths. The water is transported to local wastewater treatment facilities and undergoes a series of treatments in order to remove pollutants that would otherwise pollute the environment.

Brief History

In response to the escalating pollution of natural bodies of water, the Federal Government passed the Clean Water Act [1] in 1972. This act required that wastewater treatment plants operate with a secondary treatment system. The systems are designed to remove pollutants that generally would be released into a natural body of water, such as, lakes, rivers, and bays.

Brief Explanation

Once wastewater has gone through the Primary treatment stage the Effluent will undergo a secondary treatment in order to remove both small suspended solids and BOD5 (five day biochemical oxygen demand[2]) that pass through the primary treatment stage. All secondary treatment systems use a biological process to break down organic matter. Microorganisms are introduced to the wastewater and consume the organic matter, oxygen is delivered to the system ensuring microorganism survival. Oxygen delivery differs among the various systems. This biological process occurs naturally in nature, but is accelerated in secondary treatment systems. Typically 85% of BOD and suspended solids are removed during this process[1]. Water exiting secondary treatment will still carry nitrogen, phosphorus, heavy metals, Pathogens, and bacteria. For further removal of pollutants the water is transported to a tertiary treatment[3] system and disinfection. There are a variety of secondary treatment processes; the following are conventional processes used by treatment plants:

  • Activated sludge
  • Trickling filter
  • Non-electric secondary filtration (Biorock)
  • Oxidation ponds

There are pros and cons to each of these three processes. Operational and initial costs along with space are three factors that will often determine which technique is appropriate. Space is influenced by population size and cost of land. For example, oxidation ponds require large areas of land if land is costly or needed for housing oxidation ponds are not a likely option. Additionally wastewater treatment plants need to consider maintenance, reliability, and effectiveness of the system.

Activated Sludge

Figure 1: Active Sludge

Process: During the activated sludge process primary effluent flows into an aeration tank, where it is mixed with microorganisms. The aeration tank injects a steady supply of oxygen or air into the wastewater, ensuring that the organisms have an adequate supply of oxygen needed to breakdown the organic matter that remains in the effluent. The effluent then flows into secondary settling tanks. At this point the sludge goes in one of two directions; 1. back to the aeration tank, this is because the return sludge contains a large amount of microorganisms that will rapidly breakdown organic matter, or 2. to the sludge digester[4]. The treated water will enter the tertiary treatment stage; here it will go through the final treatment stage before it is released into a natural water system. Figure 1 is an example an active sludge system.
Pros:

  1. Low construction cost
  2. Occupies small area
  3. Relatively low odor
  4. Removes a high percent of BOD

Cons:

  1. High operating cost (air pumps)
  2. High energy expenses for oxygen demand

Trickling Filter

Figure 2: Trickling filter

Process: When primary effluent is transported to a trickling filter system the wastewater is dispensed upon a bed of media, such as rocks, stones, plastics, or salts. The effluent flows through the material at slow enough rates to allow microbial growth on the surface of the media creating a layer of film. The spacing of the media allows air to circulate throughout the trickling system. Once microbial growth takes place additional wastewater flow has contact with microorganisms; this contact ensures that the organic matter in the primary treatment effluent is broken down. The biofilm that falls off the media flows through the bed of material and will be transported to the secondary settling tank to remove excess microorganisms. The secondary effluent that settles will either enter a digester or re-enter the trickling system. Secondary effluent that re-enters the trickling filter serves several purposes, the following are examples; 1. further treatment, 2. preventing the microorganism from drying out, and 3. diluting or supplementing primary effluent. Figure 2 provides a visual layout of a trickling filter system.
Pros:

  1. Low construction cost
  2. Cheap oxygen delivery

Cons:

  1. Temperature Dependent
  2. Vulnerable to congestion, which can lead to flooding and system failure, low oxygen supply, and restricted water flow
  3. Can occupy a larger area than activated sludge
  4. High Maintenance

Oxidation Ponds

Fig 3: Oxidation pond

Process: Oxidation ponds are large and shallow; a typical depth would range from 1-2.5m. The ponds are composed of microorganisms, which feed on the organic matter received from primary effluent. Algae are a key feature in the oxidation pond system. Algae are much like the aeration tank in the activated sludge system; they deliver a steady flow of oxygen to the bacteria. The algae require sunlight to produce oxygen via photosynthesis, reaeration created by wind delivers air flow when sunlight is not available. Overall the process is slow and requires large areas of land. Typically oxidation ponds are used in areas with small populations where land is readily available. Figure 3 shows the basics of an oxidation pond system.
Pros:

  1. Small energy input
  2. Degrades Nitrogen and Phosphorus

Cons:

  1. Occupies a large area
  2. Possible odors
  3. Slow process
  4. Long retention times
  5. Climate dependent

Conclusion

Links

References

  1. Davis, Mackenzie L., Masten, Susan J. (2004) Principles of Environmental Engineering and Science New York, McGraw-Hill
Cookies help us deliver our services. By using our services, you agree to our use of cookies.