Main page
New page
Upload file
Help
Community portal
Recent changes
Talk
Contributions
Create account
Enable dark mode
Enable read mode
Log in
View history
What links here
Related changes
Page information
Editing
SCRAP Humboldt Forever Dry umbrella repair kit
(section)
From Appropedia
Warning!
You are not logged in.
Log in
or
create an account
to have your edits attributed to your username rather than your IP, along with other benefits.
Anti-spam check. Do
not
fill this in!
== How to Use == '''Materials Needed''' * 24 Twist ties * 24 3D printed clasps * 1 Umbrella frame * 1 Waterproof fabric such as shower curtains, old tarps, or like we used, Gore-Tex. * 1 Pliers (optional) {{Step | number = 1 | text = Strip the twist ties of the material around the metal. This will make it so they will be able to fit though the 3D parts hole. | image = File:Twist ties.jpeg | caption = Twist ties before and after }} {{Step | number = 2 | text = Next slide two sliding clasps into the slot at the bottom of the base. | image = File:Sliding Clasps.jpg | caption = How to slide in the clasps }} {{Step | number = 3 | text = Put the clasps around the umbrella frame and use a twist tie to attach it by sliding though both holes on the sliding clasps. | image = File:3D Part on the umbrella.JPG | caption = 3D part attached to the umbrella frame }} {{Step | number = 4 | text = For a clasp on the end, stick the end of the umbrella into the slot along with the sliding clasps so it lines up with the small hole in the umbrella rod before tightening it with a twist tie. | image = File:Clip on the end.JPG | caption = 3D clasp on the end of an umbrella frame. }} {{Step | number = 5 | text = Attach 4 clasps in the center of the umbrella, alternating metal arms. | image = File:Middle clasps.JPG | caption = 3D clasps in the center }} {{Step | number = 6 | text = Attach 2 clasps on each umbrella arm, one in the middle and one on the end, or wherever repair is needed. | image = File:2 more clasps.JPG | caption = The clasps around the umbrella frame }} {{Step | number = 7 | text = After the fabric is placed over the umbrella frame, the 3D insert is placed into the base over the fabric and turned to the right. This can be done with pliers to make it easier. | image = File:Putting in the insert.JPG | caption = Tightening the clasp }} {{Step | number = 8 | text = After all the clasps are placed and tightened, the fabric hanging off the edge needs to be cut away. Be sure to leave at least more than a half inch beside the 3D parts. | image = File:After the cut.JPG | caption = After cutting the excess fabric }} {{Step | number = 9 | text = Now the umbrella is ready for use! | image = File:Finished umbrella.jpg | caption = The finished umbrella }}
Summary:
Warning!
All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see
Appropedia:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted material without permission!
Cancel
Editing help
(opens in new window)
This page is a member of 2 hidden categories:
Category:Pages with no lead text
Category:Pages with references tag but no references
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
OK
Discussion