No edit summary
mNo edit summary
Line 7: Line 7:
#Have an extruder head with different thermal coefficients, so the heat can be radically changed throughout the print for different elements of the part
#Have an extruder head with different thermal coefficients, so the heat can be radically changed throughout the print for different elements of the part
#Use belts which can contract with thermal expansion to create greater tension
#Use belts which can contract with thermal expansion to create greater tension
#
# print bed made of strips of two materials with different coef of thermal expansion so the bed moves under the part to pop it off [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# inner and outer print nozzels with differt dT materials to provide thermal activation of prints [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# heat sensitive camera to detect fingers entering print zone for auto safety [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# use thermal energy from printer to push filament out without stepper (or at least to help) [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# use thermal energy from printer to push steppers to reduce energy use [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# use thermally expanding earplugs that get bigger in ear to cut out printer sound [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# use thermal contraction at end of print to run generator to push energy back to battery to feed printer [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# use thermal energy from hot end placed over bed to help bed leveling [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# use thermal system to determine if hot end failure occurred [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# 4D printing using exposure of printed object to dT [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# 4D of components exposure of printed object to dT in specific places [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# '''use thermal expansion to open up pores to allow dip 3D printed part in material 3 to allow for composite formation''' [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)
# use thermal expansion to put handles on tools [[User:J.M.Pearce|Joshua Pearce]] ([[User talk:J.M.Pearce|talk]]) 07:21, 4 December 2018 (PST)


#improve resolution (atomic):
#improve print speed (instantaneous):
#enhance material availability (all):
#reduce parts of the printer (1?):
#reduce costs of printer (free):
#reduce costs of materials (free):
#make it easier to use (McDonald's screen):
#make it easier to assemble (self):
#make it easier to maintain (none, unbreakable, self healing):
#make fully assembled products (anything - computer, car, smartphone, dinner):
#use functional printing materials (e.g. electronics)
#reduce waste (zero):
#use less energy (zero or ambient):
#quieter printing (soundless):
#ubiquitous printing (everywhere):
#print smaller (nanoscale):
#print bigger (apartment complex, Great Wall of China, planet?):
#enable auto calibration:
#enable auto leveling:
#enable auto monitoring:
#enable quality control:
#enable quality control:
#enable real-time feedback:
#enable real-time feedback:

Revision as of 15:21, 4 December 2018

This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...
Broad and/or obvious patent claims for 3-D printing technology may hamper the open-source 3-D printing community's ability to innovate. Previous work on an algorithm protected 3-D printing materials. This page is part of a MTU Open Source 3-D Printing class project to investigate 3-D printing concepts using TRIZ and is presented here as a defensive publication of prior art to help identify obvious 'inventions' for 3-D printing.
Examiners: The ideas on this page dated Dec 3, 2015 and Nov 29, 2016 were developed by university students with less than a semester of formal 3-D printing experience (or by an instructor in class) and thus should be considered unpatentable because of obviousness to any person skilled in the art of additive manufacturing.
Appropedians: This page is open edit. Please fee free to add ideas and sign them below with ~~~~ or to use any of the ideas to built better open-source 3-D printers.

Sklunsfo (talk) 07:05, 3 December 2015 (PST)


  1. Thermal expansion print bed that heats up when print is complete for easier removal of part
  2. Have an extruder head with different thermal coefficients, so the heat can be radically changed throughout the print for different elements of the part
  3. Use belts which can contract with thermal expansion to create greater tension
  4. print bed made of strips of two materials with different coef of thermal expansion so the bed moves under the part to pop it off Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  5. inner and outer print nozzels with differt dT materials to provide thermal activation of prints Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  6. heat sensitive camera to detect fingers entering print zone for auto safety Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  7. use thermal energy from printer to push filament out without stepper (or at least to help) Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  8. use thermal energy from printer to push steppers to reduce energy use Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  9. use thermally expanding earplugs that get bigger in ear to cut out printer sound Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  10. use thermal contraction at end of print to run generator to push energy back to battery to feed printer Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  11. use thermal energy from hot end placed over bed to help bed leveling Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  12. use thermal system to determine if hot end failure occurred Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  13. 4D printing using exposure of printed object to dT Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  14. 4D of components exposure of printed object to dT in specific places Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  15. use thermal expansion to open up pores to allow dip 3D printed part in material 3 to allow for composite formation Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  16. use thermal expansion to put handles on tools Joshua Pearce (talk) 07:21, 4 December 2018 (PST)
  1. enable quality control:
  2. enable real-time feedback:
  3. make it safer (infant approved):
  4. make is smell good (designer imposters?):
  5. make it from current waste products (CO2, flash, spent fuel rods?):





Krcipriano (talk) 07:29, 1 December 2016 (PST) JLaureto (talk) 07:30, 1 December 2016 (PST)

  1. Enclose printer so it is surrounded by high temperature air. A certain temperature could melt the layers together after they are done printing to get rid of layer lines and increase resolutionKrcipriano (talk) 07:45, 1 December 2016 (PST)
  2. Increase temperature of filament so it is almost liquid but print on a cooled bed (colder than room temperature)Krcipriano (talk) 07:45, 1 December 2016 (PST)
  3. Print with frozen objects that melt as they go through "cold" end instead of hot endKrcipriano (talk) 07:45, 1 December 2016 (PST)
Retrieved from "https://www.appropedia.org/w/index.php?title=Obvious_3D_printer_technology_based_on_37._Thermal_expansion&oldid=377157"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.