Main page
New page
Upload file
Help
Community portal
Recent changes
Talk
Contributions
Create account
Enable dark mode
Enable read mode
Log in
View history
What links here
Related changes
Page information
Editing
Mercury retort (Practical Action Technical Brief)
(section)
From Appropedia
Warning!
You are not logged in.
Log in
or
create an account
to have your edits attributed to your username rather than your IP, along with other benefits.
Anti-spam check. Do
not
fill this in!
=== Preparation === * Bend the pipe 4 inches from the threaded end into a smooth curve, with an angle of about 60-70 degrees. If possible, use a pipe bending machine to have a smooth curve. Alternatively, clamp the ΒΌ-inch diameter pipe (2a) to a larger diameter pipe (4 to 6-inch) and then manually bend it around the bigger pipe (Figure 3).<br> * Heat the pipe and fittings until red hot, before assembly, to burn off the zinc coating (zinc reacts with mercury).<br> * Allow the retort to cool, then wash it.<br> [[File:mercury retort components1.jpg|thumb|150px|right|Figure 4: Components of the assembled mercury retort]] [[File:mercury retort components2.jpg|thumb|150px|right|Figure 5: Separate components of the mercury retort]]
Summary:
Warning!
All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see
Appropedia:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted material without permission!
Cancel
Editing help
(opens in new window)
This page is a member of 2 hidden categories:
Category:Pages with no lead text
Category:Pages with no main image
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
OK
Discussion