J.M.Pearce (talk | contribs) m (→In the News) |
J.M.Pearce (talk | contribs) m (→In the News) |
||
Line 39: | Line 39: | ||
* Researchers run the numbers on cutting the cost of toys by 3-D printing them at home - [https://www.geekwire.com/2017/researchers-run-numbers-cutting-cost-toys-3-d-printing-home/ Geekwire] | * Researchers run the numbers on cutting the cost of toys by 3-D printing them at home - [https://www.geekwire.com/2017/researchers-run-numbers-cutting-cost-toys-3-d-printing-home/ Geekwire] | ||
* How DIY 3-D Printed Toys are Impacting the Multi-Billion Dollar Toy Market - [http://electronics360.globalspec.com/article/9348/how-diy-3-d-printed-toys-are-impacting-the-multi-billion-dollar-toy-market Globalspec 360 ] | * How DIY 3-D Printed Toys are Impacting the Multi-Billion Dollar Toy Market - [http://electronics360.globalspec.com/article/9348/how-diy-3-d-printed-toys-are-impacting-the-multi-billion-dollar-toy-market Globalspec 360 ] | ||
* | * Should Toy Manufacturers Be Worried About 3D Printing? [http://www.engineering.com/AdvancedManufacturing/ArticleID/15299/Should-Toy-Manufacturers-Be-Worried-About-3D-Printing.aspx Engineering.com] | ||
===International=== | ===International=== | ||
* Stampa 3D manda in crisi mercato giochi- [http://www.ansa.it/sito/notizie/tecnologia/hitech/2017/07/20/stampa-3d-manda-in-crisi-mercato-giochi_4271facb-670f-4e66-89b3-0d830ae95eca.html Ansa] (Italy, 1908) | * Stampa 3D manda in crisi mercato giochi- [http://www.ansa.it/sito/notizie/tecnologia/hitech/2017/07/20/stampa-3d-manda-in-crisi-mercato-giochi_4271facb-670f-4e66-89b3-0d830ae95eca.html Ansa] (Italy, 1908) |
Revision as of 20:59, 20 July 2017
Source
- Emily E. Petersen, Romain W. Kidd, Joshua M. Pearce, Impact of DIY Home Manufacturing with 3-D Printing on the Toy and Game Market. Technologies 2017, 5(3), 45; doi: 10.3390/technologies5030045 open access
Abstract
Through reduced 3-D printer cost, increased usability, and greater material selection, additive manufacturing has transitioned from business manufacturing to the average prosumer. This study serves as a representative model for the potential future of 3-D printing in the average American household by employing a printer operator who was relatively unfamiliar with 3-D printing and the 3-D design files of common items normally purchased by the average consumer. Twenty-six items were printed in thermoplastic and a cost analysis was performed through comparison to comparable, commercially available products at a low and high price range. When compared to the low-cost items, investment in a 3-D printer represented a return of investment of over 100% in five years. The simple payback time for the high-cost comparison was less than 6 months, and produced a 986% return. Thus, fully-assembled commercial open source 3-D printers can be highly profitable investments for American consumers. Finally, as a preliminary gauge of the effect that widespread prosumer use of 3-D printing might have on the economy, savings were calculated based on the items’ download rates from open repositories. Results indicate that printing these selected items have already saved prosumers over $4 million by substituting for purchases.
Keywords
distributed manufacturing; additive manufacturing; 3-D printing; consumer; economics; open-source; toy industry
See also
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
- Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers
- Quantifying the Value of Open Source Hardware Development
- Open-source, self-replicating 3-D printer factory for small-business manufacturing
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
- Global value chains from a 3D printing perspective
In the News
Economic Advantage to Making Your Own Stuff with 3D Printing |
---|
Error in widget YouTube: Unable to load template 'wiki:YouTube' |
- 3-D Printing Sweeping Toy Industry Off the Shelves - MTU News, Eureka Alert, Newswise, Phys.org, Science Daily, ECN Magazine, R&D Magazine
- Researchers run the numbers on cutting the cost of toys by 3-D printing them at home - Geekwire
- How DIY 3-D Printed Toys are Impacting the Multi-Billion Dollar Toy Market - Globalspec 360
- Should Toy Manufacturers Be Worried About 3D Printing? Engineering.com
International
- Stampa 3D manda in crisi mercato giochi- Ansa (Italy, 1908)
- La stampa in 3D minaccia il colosso Lego e il mondo dei giochi -Tiscali (Itallian) (2476), Attualita
- Spielzeug aus dem 3D-Drucker: Selbermachen ist bis zu 90% billiger Win Future (German, 9308)
- Stampa in 3D: a breve potrebbe mandare in crisi il mercato dei giochi MeteoWeb (italian 42086