Hexayurt.com - Project Home - Burning Man Construction - Assembly - Plans - Mass Evacuation - Rapid Deployment - Materials - Infrastructure - Informatics - Education Concept - Research Agenda - Press - Contact - Events
All Hexayurt Project materials on this page placed into the public domain in accordance with this legal statement and by adding to these pages your release your edits under those terms.
Newsflash: we now have fire test data on R-MAX / Tuff-R. . Please read the Hexayurt Safety Information before building your hexayurt
Text liberally taken from https://groups.google.com/forum/?fromgroups#!topic/hexayurt/jEMKE11jw5M This page needs polish, use at your own risk, look at other hexayurt pages, etc! LucasG 08:57, 23 August 2012 (PDT)
Gavin Harkness developed a design for a shelter made out of four polyiso panels that is simple to build. It's intended as a 2 people hexayurt, made from 4 sheets of 8x4, and can be built with as little as 4 cuts.
It was shared just a couple of weeks before Burning Man 2012, so not much real testing done yet! Just so you know!
The original design goals were:
- Temporary/emergency shelter 2 people.
- Simple, quick construction.
- Remove the need for joins in the roof panels.
- Easily moved by two people.
- Ability to be "beehived" to create larger structures.
It stands 1.2m high, 2.4m long and just under 2.1m wide.
There are 8 pieces: 2 roof pieces and 6 wall pieces:
- Two end panels and one side panel (that's three pieces) are cut from a single sheet. Do that twice. The side walls (S) are 1/4 of a sheet (1200x600), two ends (E) are then cut from the remaining 1800x1200 sheet. The roof (R) can remain uncut, or if you want to give the door some additional protection from the elements, cut off two triangles from the rear and add them to the front.
- The roof, in its simplest form, doesn't require any cutting at all. You can use a tape hinge at the top.
There are several ways to build a 4-panel hexayurt (H4). is really a family/group/set of designs.
Below are three ways that use only 4 cuts. Simple: "procrastiyurt".
If you make the "tall" panels using the offcuts from the roof, you can divide the wall panels into neat thirds (2 boards gives six identical wall pieces) and have a slightly higher unit, and zero waste.
It meets your goals of zero waste and increases living space. From what I remember, some of the reasoning why I decided against it was:
- Complicates construction. More measuring and cutting and would require joints in the end panels. More skill and time required.
- The increased height (from 1200 to 1400 or 4' to 4'7") still wouldn't allow you to stand up.
- I like the idea of a little rain protection over the doorway to stop the Irish mist from bucketing into the shelter and would allow ventilation holes to help control condensation.
- Easier to keep warm
- Increased windage.
- Increased visual pollution.
- And the un-cut roof panel could be re-cycled into a larger hexayurt at a latter stage.
It's one of the beautiful things about the hexayurt, you can adapt the design to meet your needs.
Not sure what the best taping order would be for the playa. I guess it partly depends on how many people are available. Effect of wind on flaps remains to be seen, and how do you fix it to the ground?
First ever hexayurt attempt!Edit
There was only one real issue, due to the 1" thickness of the panels there is a cumulative size issue which means you have to shorten the two side panels by about 2". You can see the gap before I did that in one of the pics attached.
Size is perfect for 1-2 people and it seems to be very strong, will know how strong when taped on the playa.
How much tape would it take to build an H4 if you are trying to economize on tape? I have 1 roll, seemingly plenty for an H2. Would that be enough for an H4?
Look at the other hexayurt construction details, and base the door off their recommendations.
For plywood, halving the number of cuts (and keeping half the panels whole) is important. Plus you get more places (outside, below the roof) to put blocks and then run screws through.
This may well be my first real size yurt ever: plywood, 4 cuts plus a door, will look at how to waterproof the very top. Basically, a third of the cost of an H12, which I wouldn't use anyway. More portable, too! And, not sure, buildable by a single person?
It maybe possible to build it using slotted plywood, similar to the way these guys build furniture:
So that it could assemble without screws and use either a tube of silicone or duct tape to seal the joints.
It maybe possible to create a kit where the panels have perforated cuts, predrilled holes, ready for someone to"break" the kit open and quickly assemble the shelter. The perforated side/end panels would be sandwiched between the two roof panels for transportation. These could be assembled, with 2" timbers precut at the required angle, with some wood glue, a handful of screws and a screwdriver (or for us lazy people, a electric drill).