Yamaha Plastics Quick Fastener

Project developed by [[[User:Zmchenie|Zmchenie]] (talk) 07:26, 8 December 2015 (PST)Zach Chenier]

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

  1. The quick fastener is what secures the plastic body panels to the frame of the snowmobile. They work by inserting them into the prefabed holes in the plastic, turn it 90 degrees clockwise and the spring pushes back and locks it into place. This device qualifies as an OSAT Project because it was a request made by someone who needed snowmobile parts. This device is a fraction of what it would normally cost if bought from a dealer/shop. If you own a Yamaha 4-stroke snowmobile, you know the need for these quick fasteners.
  2. Picture of completed print using
    Wood WorkingClamp Parts.png

Bill of Materials

  1. 1.75mm PLA filament
    1. Upload and link to all source files from open source CAD
    2. Upload and link to all STLs

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Open SCAD
  3. Cura
  4. Exacto Knife

Skills and Knowledge Necessary to Make the OSAT

  • If you used special skill – link to relevant wikipedia or wikiversity articles/courses

Technical Specifications and Assembly Instructions

  1. Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
  2. Include print time estimate
Example video summary of textbook
Error in widget YouTube: Unable to load template 'wiki:YouTube'

Common Problems and Solutions

  • Include common mistakes/problems to avoid in building your OSAT and how to overcome them

Cost savings

  • If your solution is not a low cost one then it is not really appropriate.
  1. Estimate your costs
  2. Find a commercial equivalent
  3. Calculate $ savings and % savings

References

  • The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <ref> </ref> and <references/> tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: [1]
  1. web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html

Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in [[Category:How tos]] [[Category:Electricity]] [[Category:Electric lighting]].

Cookies help us deliver our services. By using our services, you agree to our use of cookies.