J.M.Pearce (talk | contribs) m (→Related Pages) |
J.M.Pearce (talk | contribs) m (→Related Pages) |
||
Line 46: | Line 46: | ||
* [[Mobile Solar Powered 3D Printer]] | * [[Mobile Solar Powered 3D Printer]] | ||
* [[Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing]] | * [[Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing]] | ||
* [[Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties]] | |||
[[Category:3D printing]] | [[Category:3D printing]] |
Revision as of 00:57, 13 August 2018
MOST Applications of 3-D Printing |
---|
Error in widget YouTube: Unable to load template 'wiki:YouTube' |
Open-source 3-D Printing on ABC News |
---|
Error in widget YouTube: Unable to load template 'wiki:YouTube' |
This project is developing, designing and testing of customizable open source hardware applications for the RepRap 3D printer. The designs will be categorized here: OSAT 3D-Printable Designs
Useful: polymer chemical resistance chart
Wohlers Report 2014: the entire global market for 3D printing, including all products and services had the highest compound annual growth rate (CAGR) in 17 years — 34.9% — compared with an average of 27% over the past 26 years and a CAGR for the past three years (2011–2013) of 32.3%. Wohlers Report 2014 values the industry at $3.07 billion last year.[1]
3D Printing Summary
- The road ahead for 3-D printers - at PricewaterhouseCoopers, Engineering.com
- an interview with Joshua Pearce
Related Pages
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
- Wood Furniture Waste-Based Recycled 3-D Printing Filament
- Open source rapid prototyping of OSAT
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing
- Mechanical testing of polymer components made with the RepRap 3-D printer
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions
- The Effects of PLA Color on Material Properties of 3-D Printed Components
- Life cycle analysis of distributed polymer recycling
- Applications of RepRap distributed production - literature review
- Recyclebot
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Mobile Solar Powered 3D Printer
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties