Revision as of 01:42, 26 July 2014

Schedule of Events

(Two hour duration) All attendees must bring their laptops to this introduction.

Welcome and introductions
Facilitators will check that all of the software outlined here is installed and working
Facilitators will assure assembly wiki and videos are accessible by each attendee
Attendees will assemble tools

(Expect eight hour minimum duration)

8:00 AM - Introduction to workshop format and assembly
8:30 AM - Start assembly
12:00 PM - Break for lunch away from assembly area
12:30 PM - Resume assembly
Teams who complete assembly early should help teams that are not complete
Teams may leave upon demonstrating all mechanical assembly of the first printer is complete

(Expect eight hour minimum duration)

8:00 AM - Start assembly
12:00 PM - Break for lunch away from assembly area
12:15 PM - First presentation
12:30 PM - Resume assembly
3:00 PM - Break for second presentation - all assembly come to a stop for presentation
3:15 PM - Resume assembly
Teams who complete assembly early should help teams that are not complete
Teams may leave upon demonstrating all mechanical assembly of the second printer is complete
If all teams complete mechanical assembly early, upload firmware

(Expect eight hour minimum duration)

8:00 AM - Upload firmware
10:00 AM - Initial power up of printer, start calibration
12:00 PM - Break for lunch away from assembly area
12:15 PM - Third presentation
12:30 PM - Introduction to online model repositories; how to download and print models
2:00 PM - Introduction to OpenSCAD
2:30 PM - Build printing skills

@@ Line 1: / Line 1: @@
+{{MOST}}
+{{MOST-RepRap}}
 =Schedule of Events=
 ==At least two weeks prior to workshop==