Get our free book on rainwater now - To Catch the Rain.
Bioalcohols as fuel
|See also the Alcohol fuels category.|
for subtopics, how-tos, project pages, designs, organization pages and more.
|Deutsch - English|
Alcohols (methanol, ethanol, propanol, and butanol) can be used as fuels in several engines (internal combustion engines and Stirling engines). However, being a first generation biofuel, it does use source plants that can also be used as a food (or food supplement); in specific sugercane, sugar beets, potatoes, ...
Types of fuels
Ethanol is the most widely used liquid biofuel. It is an alcohol and is fermented from sugars, starches or from cellulosic biomass. Most commercial production of ethanol is from sugar cane or sugar beet, as starches and cellulosic biomass usually require expensive pretreatment. It is used as a renewable energy fuel source as well as being used for manufacture of cosmetics, pharmaceuticals and also for the production of alcoholic beverages.
Methanol is produced by a process of chemical conversion. It can be produced from any biomass with a moisture content of less than 60%; potential feedstocks include forest and agricultural residues, wood and various energy crops. As with ethanol it can either be blended with gasoline to improve the octane rating of the fuel or used in its neat form. Both ethanol and methanol are often preferred fuels for racing cars.
Use of alcohols in IC engines (diesel engines
Another issue is that ethanol is a stronger solvent than regular diesel (petrodieselW) - so much so that it will not only "clean out" the fuel tank, sending debris into the fuel filter, but it will also soften and dissolve many rubber and plastic products, including those used in fuel lines, filters and pumps. This deterioration can take years, however, and the replacement of rubber components does not have to happen immediately. Thus for long life, a different grade of components is needed in an engine that uses petrodiesel.
Local manufacture and involvement
Many biomass conversion technologies for rural applications are easily manufactured by local artisans or by small and medium sized engineering workshops. In Zimbabwe, locally made equipment for large scale ethanol production has led to the lowest capital cost per litre for any ethanol plant in the world.
Ethanol production programmes have been initiated in several developing countries. The success of the Brazilian programme is mentioned earlier in this technical brief while in Zimbabwe for example, an annual production of about 40 million litres has been possible since 1983, using locally manufactured equipment.
The substitution of ethanol for gasoline in passenger cars and light vehicles in Brazil is one of the largest biomass-to-energy programmes in existence today. Engines that run strictly on gasoline are no longer available in the country, having been replaced by neatethanol engines and by gasohol engines that burn a mixture of 78 per cent gasoline and 22 per cent ethanol by volume.Technological advances, including more efficient production and processing of sugarcane, are responsible for the availability and low price of ethanol. The transition to ethanol fuel has reduced Brazil’s dependence on foreign oil (thus lowering its importexport ratio), created significant employment opportunities and greatly enhanced urban air quality. In addition, because sugarcane-derived ethanol is a renewable resource (the cane is replanted at the same rate it is harvested), the combustion of ethanol adds virtually no net carbon dioxide to the atmosphere and so helps reduce the threat of global warming.
- Source: Goldemberg et al, Renewable Energy, Sources for Fuels and Electricity, 1993
- Wikipedia:Alcohol fuels
- wikipedia alcohol page
- Converting gasoline engine to run on ethanol
- Green Trust e-books on ethanol fuel
- Alcohol can be a gas
- Converting a vehicle to run on Ethanol
- Fuel Ethanol FAQ
|This article or section includes content from Original:Biogas and liquid biofuels by Practical Action. Used with permission.|