(Created page with "<!-- Comments that appear only in the edit view are formatted like this. --> <!-- These comments are offered as an aid as you get started. Remove as you wish. --> <!-- next li...")
 
No edit summary
(4 intermediate revisions by the same user not shown)
Line 10: Line 10:
Some introduction text and background can go here.
Some introduction text and background can go here.


== Understanding the market ==
==Project Background==


This is where you can describe what already exists, what is needed, etc.  You may want to include inline references. <ref> You can use the ref code to include inline references.  See [[Help:Footnotes]] for more.</ref>
The purpose of the OSAT project is for me to improve upon another project that someone else has done.


To make bullets use the asterisk:
Here are the original project and my improvement project side by side (my project is still in the STL file stage, not printed yet):
* Like this
* and like this
** and two for the next indent
* and back to one...


== Project goals ==
<gallery caption="OSAT Projects">
 
File:TwistedStake.jpg|Original Design.
Describe project goals here.
File:TentStakeOSAT.png|My Design.
 
</gallery>
To make a numbered list use the pound sign:
# Like this
# and like this
# See [[Help:Contents]] for more formatting code.


== Design ==
{{242}}
==Title of the device or system ==
Project developed by [your name linked to your user account]
Add a status meter by copying the following templates (inside double curly brackets) into your page as you reach each step: status-design, status-prototype, status-deployed, status-model and status-verified....
{{Statusboxtop}}
{{status-design}}
{{status-prototype}}
You can help Appropedia by contributing to the next step in this [[OSAT]]'s [[:Category:Status|status]].
{{boxbottom}}


Describe your design here.
==Abstract==
# Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
# Picture of completed print using [[Image:Wood_WorkingClamp_Parts.png|200px|right]]


<!-- Here is a sample gallery.  -->
== Bill of Materials==
<gallery caption="Sample gallery">
# Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
File:Imageneeded.png|Sample caption text.
## Upload and link to all source files from open source CAD
File:Imageneeded.png|More sample caption text. This would look better with different images. :)
## Upload and link to all STLs
File:Imageneeded.png|Even more sample caption text.
</gallery>


=== Next level heading ===
== Tools needed for fabrication of the OSAT==
# Jellybox or similar RepRap 3-D printer
#


You may need deeper level headings.  Just keep adding equal signs to get that.
== Skills and Knowledge Necessary to Make the OSAT ==
* If you used special skill – link to relevant wikipedia or wikiversity articles/courses


== Costs ==
== Technical Specifications and Assembly Instructions==
 
# Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
You may describe your costs here.
# Include print time estimate
{| class="wikitable"
# Include assembly time estimate
# Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
# Consider video if appropriate
{|style="border:1px solid #73BF73; background-color: #E6FFE6; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="150px"
!<big>Example video summary of textbook</big>
|-
|-
! header 1
|<center>{{#widget:YouTube|id=yiJDx9dCfEQ}} </center>
! header 2
! header 3
|-
|-
| row 1, cell 1
| row 1, cell 2
| row 1, cell 3
|-
| row 2, cell 1
| row 2, cell 2
| row 2, cell 3
|}
|}
See [[Help:Tables]] and [[Help:Table examples]] for more.
== Discussion ==


Your discussion.
=== Common Problems and Solutions===
* Include common mistakes/problems to avoid in building your OSAT and how to overcome them


=== Next steps ===
== Cost savings==
* If your solution is not a low cost one then it is not really appropriate.
# Estimate your costs
# Find a commercial equivalent
# Calculate $ savings and % savings


The next steps.
==References==


== Conclusions ==
* The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <nowiki> <ref> </ref> and <references/>  </nowiki>tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: <ref> web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html</ref>


Your conclusions.
<references/>
<nowiki>
Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health  care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in


== References ==


<!-- This code is for placing the citation you included above.  If you did not use the <ref> code, please delete this. -->
<references/>


== Contact details ==
[[Category:How tos]]
[[Category:Electricity]]
[[Category:Electric lighting]].


Add your contact information. 
</nowiki>


<!-- Don't change the next line unless you intend to change the categorization -->
[[category:OSAT 3D-Printable Designs]]
<!-- Do add additional, appropriate categories.  See http://www.appropedia.org/Appropedia:CategoryTree for ideas. -->
[[category:ENGR242]]
[[Category:Projects]]
[[category:242-2017 People]]

Revision as of 16:30, 28 April 2017

Sample photo caption.

This page is for Alex Weitman's Final Open Source Appropriate Technology (OSAT) Project. Her page can be found here: Alex.weitman

You can put an abstract (a brief description of your project) here.

Some introduction text and background can go here.

Project Background

The purpose of the OSAT project is for me to improve upon another project that someone else has done.

Here are the original project and my improvement project side by side (my project is still in the STL file stage, not printed yet):

  • OSAT Projects
  • Original Design.

    Original Design.

  • My Design.

    My Design.

This page is part of the 2017 Principia course ENGR242: 3-D Printing TechnologyIt's open edit now, so feel free to improve it.Read more...

Title of the device or system

Project developed by [your name linked to your user account]
Add a status meter by copying the following templates (inside double curly brackets) into your page as you reach each step: status-design, status-prototype, status-deployed, status-model and status-verified....

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

  1. Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
  2. Picture of completed print using
    Wood WorkingClamp Parts.png

Bill of Materials

  1. Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
    1. Upload and link to all source files from open source CAD
    2. Upload and link to all STLs

Tools needed for fabrication of the OSAT

  1. Jellybox or similar RepRap 3-D printer

Skills and Knowledge Necessary to Make the OSAT

  • If you used special skill – link to relevant wikipedia or wikiversity articles/courses

Technical Specifications and Assembly Instructions

  1. Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
  2. Include print time estimate
  3. Include assembly time estimate
  4. Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
  5. Consider video if appropriate
Example video summary of textbook
Error in widget YouTube: Unable to load template 'wiki:YouTube'

Common Problems and Solutions

  • Include common mistakes/problems to avoid in building your OSAT and how to overcome them

Cost savings

  • If your solution is not a low cost one then it is not really appropriate.
  1. Estimate your costs
  2. Find a commercial equivalent
  3. Calculate $ savings and % savings

References

  • The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <ref> </ref> and <references/> tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: [1]
  1. ↑ web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html

Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in [[Category:How tos]] [[Category:Electricity]] [[Category:Electric lighting]].

Retrieved from "https://www.appropedia.org/w/index.php?title=Alex_Weitman_OSAT_Project&oldid=348779"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.