Four blade design
FA info icon.svg Angle down icon.svg Project data
Authors Samuel Speet
Beccar08
Mario Barajas
Made Yes
Replicated No
Cost USD 172.5
Links http://www.thewaterpod.org
Instance of Wind turbine
OKH Manifest Download

The WindPod Turbine is a vertical axis wind turbine that uses the power of the wind to create energy which is then stored in the 12V battery banks.

Background[edit | edit source]

The Waterpod Project [1] is a art exhibition and a learning experience that will teach people about alternative solutions to environmental problems and sustainability. The barge will travel around the five burrows in New York harbor with a group of artists living aboard it. The barge will attempt to be completely self sufficient and will stop and each of the five burrows for a period of about two weeks and let people on board to learn about sustainability and alternative solutions.

Team MSB was a group created by the Engr. 215- Intro to Design class at Cal Poly Humboldt to create a structure for the Waterpod project. Team MSB decided on building a wind turbine for the barge to harness the power of the wind. Team MSB consists of members Mario Barajas, Becca Russell, and Sam Speet.

Problem Statement and Criteria[edit | edit source]

Team MSB sought to create a way to help with the energy needs of the barge using a renewable source of energy. The team decided on using a wind turbine hoping to create enough power to add a sufficient amount of energy to the Waterpod battery banks.

The following is a list of criteria used to decide upon the final design. These were formed based on client and group decisions and are listed in the order of importance decided on by the team.
  • Cost-The cheaper the turbine was the better because it would make it easier to reproduce.
  • Level of Safety-Team MSB did not want either the artists or visitors to be injured by falling blades or by coming to close to the spinning blades and so safety was an important concern.
  • Amount of Power Output- The turbine needed to function and contribute to the overall power needs of the project.
  • Level of Educational Value- People would be coming to the barge to learn about sustainability and so the turbine needed to teach people because that was the primary concern of the creators of the Waterpod.
  • Durability- The turbine needs to last for 6 months the entirety of the barges journey
  • Shipability- The Waterpod is located in New York and so the turbine needs to be transported across country and needs to be as light as possible.
  • Aesthetics- The turbine can't look bad and put visitors off because the mission of the Waterpod is to captivate people to want to try these alternative approaches at home.
  • Maintainability- The people living aboard the barge would be artists so making the turbine easy to maintain was important.
  • Level of Animal Safety- Team MSB did not want dead birds because of them flying into the turbine.

Description of Final Solution[edit | edit source]

The WindPod Turbine is a vertical axis wind turbine that uses the power of the wind to create energy which is then stored in the 12V battery banks. The WindPod turbine utilizes the vertical axis because while it is not as efficient as a horizontal wind turbine it requires less maintenance and it is able to catch wind coming from any direction without any needed adjustment. The blades are made of steel reinforced fiberglass. Their are three blades 120 degrees part from each other that catch the wind driving a shaft. This shaft then turns a band on the bottom of the turbine which turns the generator creating power. The entire WindPod turbine is about 13 feet tall and uses guyed wires to help support the structure especially in times of high wind.

AutoCad Drawings of WindPod Turbine

Abstract[edit | edit source]

With the increase in today's population, the Waterpod set out to find an innovative way to "prepare, inform, and provide an alternative to current and future living spaces." The Waterpod Project. The Waterpod is a group of artist who plan to live on a barge with the hope of living completely self-sustained for 6 months. The barge is planning to depart on May 20th and will travel around the 5 burrows in New York teaching about alternative solutions to environmentally harmful lifestyles and about sustainability. Cal Poly Humboldt Engineering 215 Intro to Design class was contacted to design some of the structures for the artists that will live aboard the barge. Team MSB is a team made by the Intro to Design Class to create a wind turbine that would harness the renewable power of the wind and turn it into energy and help to contribute to the energy needs of the barge to power a projector along with other necessary electronics. The final design was the WindPod Turbine which is a vertical access wind turbine that uses the power of the wind coming from any direction to create energy.

Costs[edit | edit source]

The cost of the turbine was important. We wanted the turbine to be reproduced easily and so the cheaper it was the better. Also the project had total budget of $225. Team MSB wanted to use as many recycled and reused parts as possible not only to save money but to make the turbine more environmentally friendly. The table below is a description of the cost and materials used to create the WindPod turbine.

Material Team MSB Cost Retail Cost
20 foot threaded rod $8.50 $8.50
2 industrial bearings $70.00 $70.00
Square Tubing Free $7.00
Scrap Metal Free $10.00
Wood Free $20.00
Steel Sheet Free $40.00
Generator $94.00 $94.00
Band $? $?
Pulleys $? $?
Voltage Regulator $? $?
Total $172.50 $249.50

Discussion and Next Steps[edit | edit source]

The WindPod turbine will continue to be tested until it is sent to the Waterpod Project. It will remain on the barge for the 6 months aiding the power needs of the barge. The blade design was the most problematic part of the design process. Finding out the correct way to situate the blades was a process of trial and error. The original blade design was four blades and then it became three helical blades and finally three blades with large surface area. Pictures of the blade designs are shown below.

References[edit | edit source]


Ampair MicroWind. (2007). "Ampair 100 Wind Turbine." Guyed or Unguyed Masts. <http://web.archive.org/web/20070701165814/http://www.boost-energy.com/ampair/products_product3.asp>. (1 May 2009).

Ancona, Dan and McVeigh, Jim (2001) "Wind Turbine – Materials and Manufacturing Fact Sheet)." Princeton Energy resources International, LLC. <http://www.generalplastics.com/uploads/technology/WindTurbine- MaterialsandManufacturing_FactSheet.pdf> (23 Feb. 2009).

Bodine, Clay. (1978). "Small Motor, Gear Motor, and Control Handbook." Chicago, Illinois.

Cheresmisinoff, Nicholas P. (1978). "Fundamentals of Wind Energy." Ann Arbor Science Publishers, Ann Arbor, Mich.

Danish Wind Industries Association. (1999). "Wind turbine towers." <http://web.archive.org/web/20090825185804/http://www.windpower.org:80/EN/tour/wtrb/tower.htm> (23 Feb. 2009).

Elliott, D.L., Holladay, C.G., Barchet, W.R.; et al. (1986). "Wind Energy Resource Atlas of the United States." Introduction; Regional Summaries. Solar Technical Information Program Solar Energy Research Institute. <http://web.archive.org/web/20200229062836/https://rredc.nrel.gov/wind/pubs/atlas/> (22 Feb. 2009).

Fink, Dan. (2005a). "Energy Self Sufficiency Newsletter: Small Wind Turbine Basics." <http://web.archive.org/web/20120615162224/http://www.otherpower.com:80/windbasics1.html>(22 Feb. 2009).

Fink, Dan. (2005b). "Energy Self Sufficiency Newsletter: Small Wind Turbine Basics." <http://web.archive.org/web/20120615130035/http://www.otherpower.com:80/windbasics2.html>(22 Feb. 2009).

Forcefield. (2000). "Wind Turbine Concepts Defined and Explained." <https://www.otherpower.com/otherpower_wind_tips.html>(22.Feb 2009).

Gipe, Paul. (1993). "Wind Power for Home and Business." Post Mills Publishers, Vermont.

Gottlieb, Irving M. "Power Supplies, Switching Regulators, Inverters, and Converters." (23 Feb. 2009).

Hoadley, Rick. (June 1998). "Experiments with Magnets and Conductors." Density of Materials. <http://www.coolmagnetman.com/magconda.htm>(25 Feb. 2009).

Huskey,A; Prascher D. (2004). "Tower Design Load Verification on a 1-kW Wind Turbine." National Renewable Energy Laboratory U.S. Department of Energy. (24 Feb. 2009).

Magnet Sales & Manufacturing Company, Inc. (2000). "Frequently Asked Questions." <http://web.archive.org/web/20190312105504/http://www.magnetsales.com:80/design/faqs_frames/faqs_3.htm FAQ 2- 25-09> (23 Feb. 2009).

Singh, A.N. (2007). "Concrete Construction for Wind Energy Towers." The Indian Concrete Journal. (24 Feb. 2009).

Wind Trap. (2004). "Boat Mounting Kits." < http://web.archive.org/web/20190103071643/http://www.windtrap.co.uk:80/generate-electricity/boat-wind-charger-kits/> (22 Feb 2009).z a`

FA info icon.svg Angle down icon.svg Page data
Part of Engr205 Introduction to Design, Waterpod
Keywords wind turbine, renewable energy demonstration, environmental design, wind power
SDG SDG04 Quality education, SDG07 Affordable and clean energy
Authors Samuel Speet
License CC-BY-SA-3.0
Organizations Cal Poly Humboldt
Language English (en)
Related 0 subpages, 13 pages link here
Aliases WaterPod Vertical Axis Wind Turbine, WaterPod WindPod Turbine
Impact 764 page views
Created April 9, 2009 by Samuel Speet
Modified February 28, 2024 by Felipe Schenone
Cookies help us deliver our services. By using our services, you agree to our use of cookies.