Background[edit | edit source]
I am Md. Saifur Rahman, I have completed my graduation by securing 5th position from the Department of Electrical and Electronics Engineering, University of Dhaka. Now, I am doing my master's degree in Applied Physics and Material Science track in the aforementioned department. My final year project is in buffer layer deposition of the thin film heterojunction solar cell. I deposited Zn(O,S) buffer layer by chemical bath deposition as an alternative to CdS buffer layer on the solid state lab of Bangladesh Energy Center, Dhaka. I wanted to see the effect of rinsing the deposited film with ammonia water. My subject GPA on solid state physics, material science, nanomaterial are impressive as a testimony towards my enthusiasm towards Electronic Devices especially photonics material. For my master's thesis, I will be working on nanotech lab of Bangladesh University of Engineering and Technology on the topic of reduced graphene oxide/CdZnS nanocomposites for hydrogen generation.
Apart from being a material enthusiastic, I am electronic hobbyist too. I, alongside with my classmates opened a club named "Electro-surge" in my junior year. Every now and then we worked on some projects like "Self Balancing Robot" and Low-Cost Computer Numerical Control Machine". From those projects, I was able to enrich my knowledge of controlling the automated system.
Research Interest[edit | edit source]
- Renewable Energy Technology
- Nano-photonics and Photonic Devices
- Nano-electronic Devices and Nano-fabrication
Research Activity[edit | edit source]
- Research Student at Bangladesh Atomic Energy Center. [Worked on deposition and characterization of Zn(O,S) thin film.]
- Simulated and optimized 2DEG for Different GaN-based Heterostructure.
- Worked with a self-made robotics group to make an algorithm and implement low-cost self-balancing robot (https://moinatique.wordpress.com/2015/11/03/self-balancing-robot/)
- Made a low-cost CNC (computer numeric control) drilling machine with that group. (https://moinatique.wordpress.com/2015/11/03/cnc-machine-desktop-version/)
Publication[edit | edit source]
- I. Hossen, M.S. Rahman, K. M. A. Hussain, M. J. Rashid (2017). “Effect of Rinsing on Zn(O, S) Film Grown by Chemical Bath Deposition”, South Asian Journal of Engineering and Technology Vol.3, No.15 (2017) 1–11.
- Rahman MS*, Babuya SK, Mahfuz MA, Siddiki FBT and Mahmood ZH (2017). “[https://www.academia.edu/34473313/Study_of_Two-Dimensional_Electron_Gases_for_GaN-Based_Heterostructure.abstract Study of Two-Dimensional
Electron Gases for GaN-Based Heterostructure]”, J Electr Eng Electron Technol 2017, 6:3, DOI: 10.4172/2325-9833.1000149.
- Under Review: Md. Kamruzzaman, Kaiser Ahmed Rocky, Ishtique M syed, Kazi Md. Amzad hussain, Tania Faruk, I. Hossen & M. S. Rahman, Preparation and Characterization of ZnS thin films deposited by chemical bath deposition (CBD) technique.